The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   LS swappers, post up your pics!! (https://67-72chevytrucks.com/vboard/showthread.php?t=412159)

reaper71 03-29-2019 07:56 AM

Re: LS swappers, post up your pics!!
 
thanks Greg!

Advanced Design 03-29-2019 11:14 AM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by reaper71 (Post 8496191)
O know it's not a finished truck yet...just couldn't resist!


Mark

Looking very good!

reaper71 03-30-2019 08:38 AM

Re: LS swappers, post up your pics!!
 
Thank You Doug

Bluerust 04-09-2019 08:07 PM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
Hi guys,

I am new to the forum.
I have recently finished a restomod 1986 K30 4x4 starting with an ugly ex-army truck. I will post a new thread on the build soon to try to help anyone else on a project like it. There are alot of nice swaps on here I could have learned from, I didn't know they were here!

2016 L96 6.0/4L80/205

Josh

Texas66 05-15-2019 06:23 PM

Re: LS swappers, post up your pics!!
 
5 Attachment(s)
Work in progress and getting so close!

amoore1972 05-16-2019 12:43 PM

Re: LS swappers, post up your pics!!
 
What year is the LS you used ? Do you have Factory AC ? If so, did you have to relocate the AC compressor high passenger side ? Can't tell from the pics.. Also is your alternator down low drivers side ?

amoore1972 05-16-2019 04:20 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by RatRod68 (Post 4648245)

What year LS is that ? Is your alternator mounted down low on drivers side ?

kenworth47 05-26-2019 10:39 AM

Re: LS swappers, post up your pics!!
 
1 Attachment(s)
l83 in my 72

scott123 07-19-2019 06:40 AM

Re: LS swappers, post up your pics!!
 
1 Attachment(s)
This is my 72 K5. 350/SM465/NP205 about to do my first LS swap.

Stumbled out of the gate a bit but today will be much better.

Scott

RockhoundII 08-11-2019 12:03 PM

Re: LS swappers, post up your pics!!
 
3 Attachment(s)
It finally runs! 2002 6.0l with ls3 heads and intake paired with a 4l80e.

aggie91 08-12-2019 10:40 AM

Re: LS swappers, post up your pics!!
 
3 Attachment(s)
My 4th one overall still in progress, and 3rd in a square...

Duck1 01-05-2020 12:37 AM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by chevyc10lover (Post 7213974)
nice swap. i know is an old tread, but i should ask.. what kind or rack and pinion is that?

Is that mount up side down?

OutlawDrifter 03-13-2020 11:17 AM

Re: LS swappers, post up your pics!!
 
My '49 GMC. LQ4 6.0L, 4L80E, Holley intake, DBW, SBC valve covers, and an Cadillac/Olds Batwing.

https://live.staticflickr.com/65535/...d363178d_c.jpg

https://live.staticflickr.com/65535/...1fe3d8a3_c.jpg

reaper71 03-14-2020 09:40 AM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
My 52 Chevy 5.3l 4l60e

rowdy11 03-23-2020 12:21 PM

Re: LS swappers, post up your pics!!
 
Curious to know who's using stock plastic engine covers vs. keeping the intake exposed. I'm trying to decide if I paint up my intake or keep and paint the cover. I have the Gen IV truck intake meaning it works well but doesn't look very good.
Thoughts?

reaper71 03-24-2020 12:34 PM

Re: LS swappers, post up your pics!!
 
4 Attachment(s)
Here are a few examples of a smoothed out stock truck intake.

The last pic is a intake I did for a customer (Blakes 67 GMC build) in that build I show step by step on how I did it.


Mark

Bigru 03-28-2020 06:21 PM

Re: LS swappers, post up your pics!!
 
5 Attachment(s)
Hey guys, I need some help.. this is my first swap and I have no idea what I’m getting into. I have a 6.0/4l80 from a Denali, I replaced the intake from a TBSS. I’ve ordered a adapter plate to use the throttle body from the 6.0 intake. What does these connect to?

mongocanfly 03-28-2020 09:48 PM

Re: LS swappers, post up your pics!!
 
bigru...might want to put this in the LS section..this section is mostly for pics

Bigru 03-28-2020 09:52 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by mongocanfly (Post 8703905)
bigru...might want to put this in the LS section..this section is mostly for pics

Got ya.

Irish1941 04-19-2020 01:06 AM

Re: LS swappers, post up your pics!!
 
1972 Chevy original short fleet. Started life as 6 and 3spd.
Built up in 1995 with swapped in V8 and automatic but needed some new blood injected into it.
https://i.imgur.com/bMfO2w4.jpg?2
So I stuffed a 2015 LS3 and TR6060 into it which snowballed into a pile of other stuff.
Z06 14" brakes, 4" and 6" drop on Hotchkis suspension blah blah
https://i.imgur.com/TVprkFX.jpg?2

https://i.imgur.com/xMJTERw.jpg?1

https://i.imgur.com/b7Ih0Ly.jpg?2

Need to get a tune on it, finish up AC and some other details but pretty much ready to hit the street.

Tork? 04-19-2020 03:11 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by Irish1941 (Post 8719944)
1972 Chevy original short fleet. Started life as 6 and 3spd.
Built up in 1995 with swapped in V8 and automatic but needed some new blood injected into it.
https://i.imgur.com/bMfO2w4.jpg?2
So I stuffed a 2015 LS3 and TR6060 into it which snowballed into a pile of other stuff.
Z06 14" brakes, 4" and 6" drop on Hotchkis suspension blah blah
https://i.imgur.com/TVprkFX.jpg?2

https://i.imgur.com/xMJTERw.jpg?1

https://i.imgur.com/b7Ih0Ly.jpg?2

Need to get a tune on it, finish up AC and some other details but pretty much ready to hit the street.

I love this! You have a build thread? I have an ls3/tr6060 combo too still gathering parts. Did you use the No Limit clutch master setup? Any pics of the transmission setup? Crossmember, trans mount, driveshaft situation?

LS short box 04-19-2020 04:10 PM

Re: LS swappers, post up your pics!!
 
On my 68 C10 I used the Captian Fab clutch kit. Worked like champ.

KFF 1 04-19-2020 04:46 PM

Re: LS swappers, post up your pics!!
 
3 Attachment(s)
1972 Suburban C20 Custom Deluxe 6.0 LS ( 402 cu in ) 4L80E 3.73 posi

Irish1941 04-19-2020 11:51 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by Tork? (Post 8720379)
I love this! You have a build thread? I have an ls3/tr6060 combo too still gathering parts. Did you use the No Limit clutch master setup? Any pics of the transmission setup? Crossmember, trans mount, driveshaft situation?

No build thread but I'll tell you what I did.
Im really not a kit guy. Just used Wilwood clutch master. 3/4" bore if I recall. Works perfect. Lining up rod to master was hardest part and that was pretty easy.
Drivetrain only has 20k on it but still swapped in new clutch. Just LuK replacement.
Trans crossmember is a IFS. https://www.amazon.com/Ingenuity-Fab.../dp/B074L8YYY6
Good in fact that you can center the trans plus I couldn't make it for price they charge. Little rough out of the box but very slick piece. Has dual exhaust humps too.
The actual trans mount I made and it takes a TH350/400 rubber or poly mount. Factory '15 Camaro piece was too high for the floor pan.
Driveshaft is modded rear a 2002-03 Excursion 4x4 with slip joint.
Couldn't see spending $1k for a driveshaft.

70inbville 04-26-2020 04:36 PM

Re: LS swappers, post up your pics!!
 
Irish1941

would you be so kind as to tell how the front brake system on your beautiful truck came to be?

Thanks, Chip

Irish1941 04-27-2020 11:51 AM

Re: LS swappers, post up your pics!!
 
87 spindles with hubs and caliper mounts from Kore3.
Tobin from kore3 is a great guy and super helpful. If you want big brakes that work, you can't go wrong.
http://www.kore3.com

70inbville 04-27-2020 11:59 AM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by Irish1941 (Post 8726843)
87 spindles with hubs and caliper mounts from Kore3.
Tobin from kore3 is a great guy and super helpful. If you want big brakes that work, you can't go wrong.
http://www.kore3.com

Thank you. since seeing your one pic of those brakes I have been sent down a very long rabbit hole looking at 50 some pages on gringolocos build and that has opened so many more rabbit holes! :metal:

doug_p 04-27-2020 02:02 PM

Re: LS swappers, post up your pics!!
 
Just ordered the Kore3 Z51 14"/13" kit for my truck, and 2nd the positives on Tobin. Very helpful, and willing to answer a boatload of questions. Cannot say enough about how helpful he was!

gringoloco 04-27-2020 08:56 PM

Re: LS swappers, post up your pics!!
 
1 Attachment(s)
Quote:

Originally Posted by 70inbville (Post 8726850)
Thank you. since seeing your one pic of those brakes I have been sent down a very long rabbit hole looking at 50 some pages on gringolocos build and that has opened so many more rabbit holes! :metal:

Glad to be of help :lol:
Quote:

Originally Posted by doug_p (Post 8726950)
Just ordered the Kore3 Z51 14"/13" kit for my truck, and 2nd the positives on Tobin. Very helpful, and willing to answer a boatload of questions. Cannot say enough about how helpful he was!

Congrats! Tobin is probably the best vendor I have ever dealt with.

...and a pic of my LS swap, since we’re in this thread:

gringoloco 04-27-2020 09:01 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by Irish1941 (Post 8719944)
1972 Chevy original short fleet. Started life as 6 and 3spd.
Built up in 1995 with swapped in V8 and automatic but needed some new blood injected into it.
[img]
So I stuffed a 2015 LS3 and TR6060 into it which snowballed into a pile of other stuff.
Z06 14" brakes, 4" and 6" drop on Hotchkis suspension blah blah
[img]

[img]

[img]

Need to get a tune on it, finish up AC and some other details but pretty much ready to hit the street.

I like your style! Who makes the wheels?
Quote:

Originally Posted by KFF 1 (Post 8720447)
1972 Suburban C20 Custom Deluxe 6.0 LS ( 402 cu in ) 4L80E 3.73 posi

I like your style, too. How’s you get the big block valvecovers to fit?

jrusher 04-27-2020 10:52 PM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
Just added boost to my 65 and my wife’s 61 stocker

Irish1941 04-28-2020 12:45 AM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by gringoloco (Post 8727205)
I like your style! Who makes the wheels?

Mike from Circle Racing did them up. Last set before he moved the shop east.
Another great guy to deal with.

Duck1 05-15-2020 10:58 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by Bigru (Post 8703737)
Hey guys, I need some help.. this is my first swap and I have no idea what I’m getting into. I have a 6.0/4l80 from a Denali, I replaced the intake from a TBSS. I’ve ordered a adapter plate to use the throttle body from the 6.0 intake. What does these connect to?

2500 Denali? Because 1500 has 4L65E

beaterku 05-18-2020 11:15 AM

Re: LS swappers, post up your pics!!
 
3 Attachment(s)
Here is my 72 with a 6.0/4L80e I finished up last year.

jrusher 05-18-2020 12:42 PM

Re: LS swappers, post up your pics!!
 
Quote:

Originally Posted by beaterku (Post 8741753)
Here is my 72 with a 6.0/4L80e I finished up last year.

Beauty !

youngrodder 05-26-2020 10:52 AM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
The LS1 in my 53 Suburban..

Cmillwheels 05-27-2020 11:29 PM

Re: LS swappers, post up your pics!!
 
1 Attachment(s)
Still a work in progress but I’m getting closer....

Fitz57 06-06-2020 05:18 AM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
Finally after many years I got my 57 on 05 Silverado 4x4 frame with 5.3 L33 going down the road.

Jason 56 08-03-2020 10:44 PM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
Here’s a L83 5.3L/ 8L90 in progress. Going in my 56!

332rick 08-04-2020 12:27 AM

Re: LS swappers, post up your pics!!
 
2 Attachment(s)
Here are few of my setup and a before and after photo.


All times are GMT -4. The time now is 03:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com