The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

KQQL IT 05-19-2024 11:26 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Quote:

Originally Posted by Jiggers72-GMC (Post 9313190)
Nice score, I hope the boy is ok

Yes he was, thank you.
And was a fine Sunday together got a little pickin in too.

Already Gone 05-20-2024 06:56 PM

Re: What did you do to your truck today.The 3rd chapter
 
4 Attachment(s)
Last year made a faux pas backing out of my yard and bent the upper side molding. Found a guy that straightened it back to almost normal. Broke one clip and had a hell of time sourcing the right one but found it at Mar K, black clip in molding. The " What did I do to my Truck Today " part is I finally got the molding back on the truck today.. .

KQQL IT 05-20-2024 11:43 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Already Gone (Post 9313374)
Last year made a faux pas backing out of my yard and bent the upper side molding. Found a guy that straightened it back to almost normal. Broke one clip and had a hell of time sourcing the right one but found it at Mar K, black clip in molding. The " What did I do to my Truck Today " part is I finally got the molding back on the truck today.. .

Looks good. Green trucks have really been growing on me lately

72c20customcamper 05-21-2024 08:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Buttoned up the exhaust today . These butt clamps work real well really didn’t want to weld the pipes

'68OrangeSunshine 05-21-2024 09:52 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 72c20customcamper (Post 9313602)
Buttoned up the exhaust today . These butt clamps work real well really didn’t want to weld the pipes

Wished I'd had those on my headers when they burned/rusted thru and I had to R+R Headers. While I was careful to order the exact same p/n to get the same configuration, Headman had gotten smarter than me and had a whole new attachment scheme. They said it was better and improved, but I'm the guy who had to blast seven miles down a main drag to Midas to get the new ones welded on. A cop got on my tail the last couple blocks, but when I pulled a left into the muffler shop, he lost interest.
Especially annoying were the many cuts and scrapes on my wrists from having to pull them apart with a sawzall.
:waah:
Yours look good.

Extended Power 05-23-2024 04:30 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
I really like these LED headlights.
Hooked the middle bar to be DRL.
Pictures don't show up correctly.
Top section looks like black chrome, then the white bar, then the bottom section.

Steeveedee 05-23-2024 07:39 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Extended Power (Post 9313932)
I really like these LED headlights.
Hooked the middle bar to be DRL.
Pictures don't show up correctly.
Top section looks like black chrome, then the white bar, then the bottom section.

Nice and white! Is that without a relay kit?

67ChevyPickupMan 05-23-2024 10:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
Checked to make sure the top radiator hose I ordered was correct(it was), so with that being good I cleaned up and repainted the thermostat housing and cleaned the surface on the intake manifold. Hope/Plan to have that altogether tomorrow.

69Penka 05-23-2024 11:05 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Getting my truck painted. The bed was painted last week and the cowl and God this week. The bed got lined this week as well. I also got the seat reupholstered. She's almost done.

69Penka 05-23-2024 11:08 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
More pics

69Penka 05-23-2024 11:10 PM

Re: What did you do to your truck today.The 3rd chapter
 
4 Attachment(s)
A few more.

'68OrangeSunshine 05-23-2024 11:18 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 69Penka (Post 9313996)
Getting my truck painted. The bed was painted last week and the cowl and God this week. The bed got lined this week as well. I also got the seat reupholstered. She's almost done.

I like the seat. Nice job.
Will you paint the Cab top White?

Extended Power 05-23-2024 11:40 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Steeveedee (Post 9313956)
Nice and white! Is that without a relay kit?

Yes sir, no relay required...plug and play for the most part.
I just ran an accessory switched wire to all four for the DRL’s. (Key on, DRL’s on.)

68bowtie 05-24-2024 12:17 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 69Penka (Post 9313996)
Getting my truck painted. The bed was painted last week and the cowl and God this week. The bed got lined this week as well. I also got the seat reupholstered. She's almost done.

Looks great

'68OrangeSunshine 05-24-2024 02:31 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Extended Power (Post 9314004)
Yes sir, no relay required...plug and play for the most part.
I just ran an accessory switched wire to all four for the DRL’s. (Key on, DRL’s on.)

I guess LEDs require a lot less amperage than filament-based lamps.

Steeveedee 05-24-2024 10:15 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Extended Power (Post 9314004)
Yes sir, no relay required...plug and play for the most part.
I just ran an accessory switched wire to all four for the DRL’s. (Key on, DRL’s on.)

Thanks! I'm using a relay and waiting for a bulb to go bad before making any changes.

Steeveedee 05-24-2024 10:18 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 69Penka (Post 9313997)
More pics

Sure is purty! I like that color.

Chevys4life 05-24-2024 11:48 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 69Penka (Post 9313998)
A few more.

That's a nice color combination. It is going to look really good!!!

72c20customcamper 05-24-2024 02:32 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Got the new engine started . Ran real nice now I can put the nose back on . Have a video but for some reason I can’t upload it from my phone to YouTube

Steeveedee 05-24-2024 03:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
Does BPE break the cams in on their engines? If it's a roller, that might be a moot point? I've read the break-in procedure and it seems to be full power runs. Seeing all the horror stories about cams going flat, I hesitate to rebuild the old 402.

Ol Blue K20 05-24-2024 05:29 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 69Penka (Post 9313998)
A few more.

Nice, looks good

72c20customcamper 05-24-2024 07:12 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Quote:

Originally Posted by Steeveedee (Post 9314118)
Does BPE break the cams in on their engines? If it's a roller, that might be a moot point? I've read the break-in procedure and it seems to be full power runs. Seeing all the horror stories about cams going flat, I hesitate to rebuild the old 402.

Ran on a dyno but it’s a roller cam engine so there is no initial 2000 rpm for 20 minutes break in ,as per their instructions I did turn the engine over on the starter with the plugs removed till it had oil pressure start at high idle check for leaks and noise ,drive at moderate speeds and not at one speed to long for 500 miles . I did use their break in oil never put bright blue oil in an engine

72c20customcamper 05-24-2024 07:21 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Steeveedee (Post 9314118)
Does BPE break the cams in on their engines? If it's a roller, that might be a moot point? I've read the break-in procedure and it seems to be full power runs. Seeing all the horror stories about cams going flat, I hesitate to rebuild the old 402.

Another thing I don’t remember ever taking a brand new car and revving the piss out of it in park or neutral. I remember getting new AMC cars and jeeps right off the truck prepping them and then putting them on the lot . Nobody ever did the 2000 rpm for 20 minutes . Well I can remember my cousin taking AMXs and Machines out and beating the piss out of them .

'68OrangeSunshine 05-24-2024 07:52 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 72c20customcamper (Post 9314163)
Another thing I don’t remember ever taking a brand new car and revving the piss out of it in park or neutral. I remember getting new AMC cars and jeeps right off the truck prepping them and then putting them on the lot . Nobody ever did the 2000 rpm for 20 minutes . Well I can remember my cousin taking AMXs and Machines out and beating the piss out of them .

That brings up a good point... Does the Factory break-in the engines before installing them on the line? Or are they run on a manufacturer's track to break in?
I know home builders always go thru the ritual of breaking in a newly-assembled engine:
With a distributor shaft mounted in a variable speed drill motor's chuck, spin up the Oil Pump until circulation is noted.
Reinstall Distributor.
With a crankcase full of Non Detergent SAE 30 oil,
Pre Run at a specified RPM for about 20 or 30 minutes in place, observing functions.
Some will flush this oil and filter, and add more ND SAE 30 and run for 500 miles at variable speeds but no freeway action.
After 500 miles, flush oil again with type you will run for its life, and the break-in is complete.

So do the manufacturers just pump out green engines, and let the consumers break them in?

72c20customcamper 05-24-2024 08:27 PM

Re: What did you do to your truck today.The 3rd chapter
 
The car manufactures do not break in engines . Used to be cars would have less than 10 miles on them mostly from the dealer moving it and going to fill it up but I doubt they fill them up anymore . The last new vehicle I bought was my Dodge 3500 CTD it had 100 miles on it as they had to bring it up from another dealer . But with overhead cams roller cams the need to break in is moot. Studebakers have solid lifters never had one wipe a cam out .


All times are GMT -4. The time now is 03:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com