Re: What did you do to your truck today?
Wired up the wipers.
Posted via Mobile Device |
Re: What did you do to your truck today?
3 Attachment(s)
My passenger side notch was @ 3/8" off center to top of the axle tube - not happy - but it "will work"... tube hits the snubber.
I relieved the front lower edge a bit with the grinder and dressed it up. Moved the driver's side notch up a bit to correct and I got it welded in yesterday. My buddy Keith say's I'm a mad-man for attempting it in the first place - it was my first time doing something like this... scary. No guts - no glory... DONE with the NOTCH-OHS! With the bed sills on pads and full extension of the rear suspension to the snubbers it looks like it could hit the bed wood at some point. Raising the bed floor for clearance I guess... Rear 4" drop springs today. rg |
Re: What did you do to your truck today?
Well boys,
I am way behind, So yesterday I hauled a lot of junk with mine. Then tarped it that evening, and now its raining today! Good thing I threw the tarp on it! |
Re: What did you do to your truck today?
4 Attachment(s)
With the 62 original rear still in I decided to "finish" the rear drop to see what it will look like when I am actually done with the chassis and suspension...
I have to figure out shock placement, pinion angle for saddles on new rear, and so on. I have another question - Are any of you that went 5 1/2" front // 6" rear on a static drop running a rear tank and has it been a problem? I got the rear-tank conversion "kit" from Brothers and I'm looking at making that work somehow too. Thanks doesn't really cover the gratitude I have for this site... rg |
Re: What did you do to your truck today?
My truck got pulled out of the garage to pull my wifes furd in.................Happy wife happy life right??
|
Re: What did you do to your truck today?
Installed my fan shroud for my electric fan and aluminum radiator. Runs a little cooler now.
http://i1280.photobucket.com/albums/...ps81b740d9.jpg Worked on my bed sides again. http://i1280.photobucket.com/albums/...psca2e8da0.jpg Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Shot the base color for part of the firewall. I only had a tiny bit of paint, but I stretched enough to cover enough of the portion that I wanted blue. The rest will be satin black, like the inner fenders and under hood.
I'll clear it tomorrow night after work (hopefully). I was supposed to be finished with the firewall AND the frame, but I spent a lot of time sanding some more on the firewall. Still didn't take it all the way to bare metal everywhere (wished I would have). I also had a comparability issue with the rusty metal primer and the self-etching primer; it ended up cracking. I guess I didn't wait enough for the rusty metal primer to cure, so it was still off gassing and shrinking. I was able to cover it with some high build primer and sand it down so it doesn't show. Aggravating though. Alright, I even flipped the picture upside down in photoshop and it still came out upside down on the post! Sorry, I tried! Posted via Mobile Device Posted via Mobile Device |
Re: What did you do to your truck today?
Installed Langdon's HEI in my 235, swapped turbos for Cherry Bombs, filled in some dents...
|
Re: What did you do to your truck today?
Nothing today but yesterday I threw hay in the back and took it down to the barn to feed the horses.
http://imageshack.us/a/img14/6042/c45x.jpg http://imageshack.us/a/img23/9365/c53qw.jpg http://imageshack.us/a/img109/4602/c43a.jpg |
Re: What did you do to your truck today?
3 Attachment(s)
e l e - digg'n that last pic big~time - nice truck!
Today I relocated my front shock mounts on my 62 C10 chassis - Thanks Mark! rg |
Re: What did you do to your truck today?
Finally got my electric problems solved. Bad grounds-imagine that! Tomorrow new mufflers and work on the bed if it's not raining.
|
Re: What did you do to your truck today?
Got my back ordered fender from Truck and Car parts in Cali... I now have no excuse.....
|
Re: What did you do to your truck today?
Ordered a muffler and a driveshaft bearing. Loaded my bedwood on the roof of my station wagon to take to a friend's house to cut to the proper dimensions tomorrow. Time for a project thread...
|
Re: What did you do to your truck today?
Finally got that beast of rear end (ho52) today just need to bleed the brakes since it was apart I stuck 2" blocks in it my 66 c20.
Posted via Mobile Device |
Re: What did you do to your truck today?
http://carphotos2.cardomain.com/imag...828_medium.jpg
GOT A/C WORKING freezing cold now , bought 2 front tires 10 ply |
Re: What did you do to your truck today?
I got the longbed washed, and the shortbed is sad and dirty in the background.
http://oi42.tinypic.com/apfplh.jpg |
Re: What did you do to your truck today?
http://carphotos.cardomain.com/image...5863_large.jpg
got the windows tinted and new front tires but lost a/c compressor took a crap http://carphotos3.cardomain.com/imag...5862_large.jpg |
Re: What did you do to your truck today?
1 Attachment(s)
Installed front bumper and aligned some frond end sheet metal.
|
Re: What did you do to your truck today?
Anubisani, this is the 60-66 truck section...
|
Re: What did you do to your truck today?
Got started on the disc brake and power steering conversion.
Chris http://www.fquick.com/images/vehicle...5168372857.jpg Posted via Mobile Device Posted via Mobile Device |
Re: What did you do to your truck today?
I rebuilt my alternator today. That rear bearing was *NOT* fun.
http://6066gmcclub.com/forum/showthread.php?p=48894 http://windypix.com/?dm=NZ7Y.jpg |
Re: What did you do to your truck today?
Worked on mounting rear tank conversion kit in my 62 C10.
rg |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
Your box from Amazon in the background agrees ;) |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Today my truck got its motor bay and undercarriage steam-cleaned to remove 48 years of gunk in preparation for some wrenching.
http://imageshack.us/a/img62/4510/c70yi.jpg Yesterday it got some lettering on the doors. http://imageshack.us/a/img542/4918/c71a.jpg http://imageshack.us/a/img708/7008/c67b.jpg |
Re: What did you do to your truck today?
Drove my wife to visit her Daddy in the cemetery.
He always wanted to ride in my 1965 C10 "Sally" but he left us before I got her done, so I take my wife in Sally so he can see her while we visit, he seems to ride back home with us in my wife's heart every time. He causes her to cry.... "Bill" was a good man, and I am sorry I didn't work fast enough! Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Installed my junk yard sway bar today. Purchased it back in late winter and then had to shelve it when my starter blew, requiring emergency attention. I understand why everyone that's added a sway bar says it's a must, the handling is so much less Titanic like.
|
Re: What did you do to your truck today?
2 Attachment(s)
Finished hashing out the rear tank conversion on my 62 C10 while my son cleaned the frame.
rg |
Re: What did you do to your truck today?
...as I'm getting the rest of the body panels aligned and ready for paint later this year, I finally mocked up my Pomona Swap meet find from 10 years ago. Rear cab trim...
http://i268.photobucket.com/albums/j...ps98c73f0b.jpg |
Re: What did you do to your truck today?
With a month to go I decided to get "Brutus" lookin better for the brothers show. Also found out my bedsides aren't as nice as I first thought :( [IMG]http://i1099.photobucket.com/albums/...602_155816.jpg[/IMG]
Gunnar helped out too lol! Seriously brook helped out like always, she's awesome [IMG]http://i1099.photobucket.com/albums/...602_155833.jpg[/IMG] [IMG]http://i1099.photobucket.com/albums/...602_155847.jpg[/IMG] [IMG]http://i1099.photobucket.com/albums/...602_155905.jpg[/IMG] Posted via Mobile Device |
Re: What did you do to your truck today?
I dig that truck. /\ /\ /\ It just has "the look."
|
Re: What did you do to your truck today?
well I found out the A/C COMPRESSOR is leaking from the body the dyed showed yhat , took it to the car wash and pressure cleaned the dirt out of the bed , also adjusted the idle on the TBI since someone had messed with it and it was idling to high .
|
Re: What did you do to your truck today?
Quote:
My sympathies to you and your wife. It's great that you have a bonding point you can all three enjoy. |
Re: What did you do to your truck today?
Got the rest of the parts for my Disk Brake Conversion on my 65.
http://i1019.photobucket.com/albums/...0/IMG_6515.jpg http://i1019.photobucket.com/albums/...0/IMG_6514.jpg http://i1019.photobucket.com/albums/...0/null-2-2.jpg Need to get the brake booster for power brakes. I know its not something I have "DONE" but I did order them and will be doing them soon. |
Re: What did you do to your truck today?
Replace the fan clutch, new alternator,
Posted via Mobile Device |
Re: What did you do to your truck today?
Quote:
Posted via Mobile Device |
Re: What did you do to your truck today?
Finished cutting up the spare frame and turned it into a cab dolly. Rolled it up under the car port and loaded the scrap on the trailer.
Should be done assembling the frame this coming Sunday and then wrap it up and move it out of the way so I can start patching the BBW cab. Steven |
Re: What did you do to your truck today?
It's a shame those have never been reproduced. They can be such a nice improvement. Many trucks could benefit by adding one, but the rarity and expense makes it impractical for a lot of owners.
Quote:
|
Re: What did you do to your truck today?
Quote:
|
All times are GMT -4. The time now is 02:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com