The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

robber grin 06-08-2013 08:20 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
My son and I "Finished" priming and painting the 62's chassis.

rg

Reyals Bemus 06-08-2013 08:36 PM

Re: What did you do to your truck today?
 
The chassis looks fantastic. What did you paint it with?

WCHLVR 06-08-2013 08:56 PM

Re: What did you do to your truck today?
 
Not so much a "do to" as it is a "do with". Last night I got to use it as a picnic table for the BBQ we had at the shop-

https://sphotos-a.xx.fbcdn.net/hphot...66639976_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.n...02559711_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.n...00936368_n.jpg

We ended up with like a dozen cars/trucks showing up!

robber grin 06-08-2013 09:39 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Reyals Bemus (Post 6114099)
The chassis looks fantastic. What did you paint it with?

THANKS!

We just rattle-canned it with Rustoleum gray primer then Rusto's Pro-Series Gloss Black.

rg

62 Barnfind 06-08-2013 09:41 PM

Re: What did you do to your truck today?
 
Did my first test drive in my 62!

http://img.photobucket.com/albums/v3...ps028b185f.jpg

http://img.photobucket.com/albums/v3...ps7d5e9353.jpg

jayoldschool 06-08-2013 10:26 PM

Re: What did you do to your truck today?
 
Congrats! I'm really liking how that paint turned out.

FetchMeAPepsi 06-08-2013 10:28 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by robber grin (Post 6114069)
My son and I "Finished" priming and painting the 62's chassis.

rg

Looks great! Father son team makes it all that more fun!

Quote:

Originally Posted by 62 Barnfind (Post 6114194)


Sweet looking truck!


Quote:

Originally Posted by LT1 Burb (Post 6113475)
Opened the hood to change my header gaskets and saw how much work it was going to be and closed the hood again. I guess I will wait until winter.


Sometimes you just gotta

http://www.melissasbargains.com/wp-c...sleep-sack.jpg


Sack up! :D Eat that elephant one bite at a time.



Today and yesterday I did nothing but drive my truck to the hardware store. It was great! Sadly the fun was interrupted several times by arriving at my destinations. And I swapped struts on the wife's car. Tore the end of my middle finger off. I hate that car. My truck never tore anything off of me but a frown. :D

Well, and my shirt. Once. But no one needs to know about that. ;)

She's a right feisty little vixen.:metal:

Trsmotrhed 06-08-2013 11:47 PM

Re: What did you do to your truck today?
 
Finished sanding my bed side. Looks great. My arms are wore out. Beer time now.
After.
http://i1280.photobucket.com/albums/...ps31a9379b.jpg

Before.
http://i1280.photobucket.com/albums/...pse15f499f.jpg
Posted via Mobile Device
Posted via Mobile Device

mud.man.rj 06-09-2013 12:23 AM

Re: What did you do to your truck today?
 
That is some nice work on the bedside.

mattbert56 06-09-2013 02:51 AM

Re: What did you do to your truck today?
 
today went and bought all my trim, wind shield wipers, and an original ignition switch for 100 bucks @ cream's today for the 65. also talked to the manager and we made friends, let me trade my old door handles for the ones he had in the lot. one off trade. good man.

jbgroby 06-09-2013 05:38 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
I got the front of the rad support raised and was able to mount the first fender. I was also able to mount the Fender V-6emblem. I have literally waited 13 years to do this!!I need a hanky sniff, sniff.

JWheeler331 06-09-2013 05:50 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jbgroby (Post 6115364)
I got the front of the rad support raised and was able to mount the first fender. I was also able to mount the Fender V-6emblem. I have literally waited 13 years to do this!!I need a hanky sniff, sniff.

Looks great Jake. How about a picture of the whole truck? I need to get by there and check it out.

markeb01 06-09-2013 05:53 PM

Re: What did you do to your truck today?
 
Man that is really pretty. Nice panel alignment!

robber grin 06-09-2013 06:04 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Looks AWESOME JB!


Ray and I put the 73 K10 308 posi in the 62 and got it back on the ground once again...

We need to sort out rear shocks now. Monroe 59571's are too short.

Then pinion angle, panhard, lines, etc.

rg / ray~ray

DPowers 06-09-2013 06:27 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Installed my alum grill and front plate today.

mud.man.rj 06-09-2013 06:42 PM

Re: What did you do to your truck today?
 
Your paint looks wicked in the sun, cool 66 plate.

DPowers 06-09-2013 06:49 PM

Re: What did you do to your truck today?
 
Thanks- Originally from the buckeye state

19666Trucker 06-09-2013 08:01 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Posted via Mobile Device
Got the newly rebuilt radiator(thanks to C.R.S. $65 to seal tanks and rod out and repaint) filled it up with water and good thing after pressure built the weep hole in water pump wants show me it works. Got new pump in and he is running cool and no leaks. Next project cut the springs and open the pipes.
Posted via Mobile Device opps I guess to it was to hot in Scottsdale today

TJ's Chevy 06-10-2013 12:06 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Hauled some compost with mine to the other garden( ya gotta have two gardens cause ones never enough).

punkrex 06-10-2013 12:42 AM

Re: What did you do to your truck today?
 
Today I had intentions of upgrading to an HEI distributor. After much debate I dropped some cash on a Skip White dizzy. I went to Napa and picked up 65 vette 80mm plug wires. Checked current timing and it was set by the PO at 0 degree advance- no womder it ran like a dog (283). Verified the vacuum advance at different Rpms and determined it was all in at 16 degrees at around 2800 Rpms. Started to route the new plug wires and determtermined that wires 3&4 were way to short, back to nappy and same PN but correct lengths! but I had to raise the engine off the mounts to get clearance for the new fatter wires. I also spliced into the pink wire from the ignition to provide 12v to the new dizz. After hooking up the new skip white dizzy the truck had a hard time idling- even at 0 degrees and up to eight- it just wouldn't run. Acted retarded. Give it any vacuum FORGET ABOUT IT!!! It would die and usually ended in a poof of exhaust through the carb. Tried another coil(MSD) and it seemed to run worse... Verified plug wires to no avail. I eventually went back to the old points Delco Remey Dizzy and it purred like a kitten. Advanced timing to a total timing of 32- could advanced a more I think but for now it's much better. Gonna call skippy blanco tomorrow and have them send me a new dizzy cause I'm pretty sure something is a wry with this one. Eight hours later...
Posted via Mobile Device

Blue_Aura 06-10-2013 11:44 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
After tons of scraping, wire brushing, power washing and repeating all steps several times, I got the front frame and suspension all painted.

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

61K10 06-10-2013 12:27 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
I decided to paint my truck myself--well maybe not the hood (that's all you can see while driving--right) grill and grill shell. will work my way to the big stuff.

robber grin 06-10-2013 08:05 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
^^ Looks nice - like the color too ^^

I figured out my back shocks and put them on the 62.

rg

endlessearth 06-10-2013 11:48 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 61K10 (Post 6116660)
I decided to paint my truck myself--well maybe not the hood (that's all you can see while driving--right) grill and grill shell. will work my way to the big stuff.

I love that color.

64c20crewcab 06-11-2013 12:07 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
I did a parts trade for 61 hood grille ans support. Need the headlight bezels if any of ya have a set available, please let me know. Thanks!!
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

markeb01 06-11-2013 01:13 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Blue_Aura (Post 6116615)
After tons of scraping, wire brushing, power washing and repeating all steps several times, I got the front frame and suspension all painted.

What a nice achievement. Looks great!

TJ's Chevy 06-11-2013 09:59 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 61K10 (Post 6116660)
I decided to paint my truck myself--well maybe not the hood (that's all you can see while driving--right) grill and grill shell. will work my way to the big stuff.

Looking cool!:metal:

TJ's Chevy 06-11-2013 10:00 AM

Re: What did you do to your truck today?
 
Thinking of putting the tarp on mine today. It looks like its gonna rain in these parts......

firefighter736 06-11-2013 10:45 AM

Re: What did you do to your truck today?
 
Had some louder exhaust installed yesterday evening!


Blue_Aura 06-11-2013 11:08 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by markeb01 (Post 6117841)
What a nice achievement. Looks great!

Thanks Mark!
Posted via Mobile Device

61K10 06-11-2013 11:54 AM

Re: What did you do to your truck today?
 
64c20--there was a set on e-bay------

62 Barnfind 06-11-2013 08:29 PM

Re: What did you do to your truck today?
 
Installed my new seat cover today.

http://img.photobucket.com/albums/v3...s293d63b5.jpeg

http://img.photobucket.com/albums/v3...s66f3c4d5.jpeg

Blue_Aura 06-11-2013 09:51 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 62 Barnfind (Post 6118958)

Very nice! That seat cover and carpet would go perfect with my truck.
Posted via Mobile Device

gixxer711 06-11-2013 11:53 PM

Re: What did you do to your truck today?
 
Started the notch.

http://i347.photobucket.com/albums/p...ps4ee3e27a.jpg
Posted via Mobile Device
Posted via Mobile Device

mud.man.rj 06-12-2013 12:19 AM

Re: What did you do to your truck today?
 
that is a Killer notch, wow I like it.

gixxer711 06-12-2013 12:53 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by mud.man.rj (Post 6119437)
that is a Killer notch, wow I like it.

It's kp components. As soon as my buddy gets his plasma cutter back from the shop, the bottom piece can go in then final welding. Once it's done, we can start on the 4 link, while I am waiting for my dropmember and control arms!
Posted via Mobile Device

BigDan3131 06-12-2013 02:32 AM

Re: What did you do to your truck today?
 
Well the weather is finally starting to dry out and I can get started on the truck. I have decided to get the Rhino done and the paint on it and next year when I get another tax return the motor and trans and new wheels.

jayoldschool 06-12-2013 07:24 PM

Re: What did you do to your truck today?
 
Wire wheeled, primed, painted the beads of my wheels. I'll mount 235 75 15 whitewalls on them tomorrow! Some might be wondering why I didn't do the complete wheel. It wouldn't fit with the truck. They need to be crusty.

http://i40.photobucket.com/albums/e2...ps69a17502.jpg

donthekawguy 06-12-2013 09:49 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
I finally got the front tires turned around and started fixing up the bed.

Lugnutz65 06-12-2013 09:57 PM

Re: What did you do to your truck today?
 
I set the engine onto the frame. Gotta get this thing back together.

http://i618.photobucket.com/albums/t...ps13394e37.jpg

http://i618.photobucket.com/albums/t...ps9a2daf10.jpg


http://i618.photobucket.com/albums/t...ps61c99a66.jpg

http://i618.photobucket.com/albums/t...psd7a66ed6.jpg


All times are GMT -4. The time now is 04:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com