Originally Posted by Getter-Done (Post 9172057)

You rung my Bell:lol:
Are you ready;)
I have a 10" Atlas Craftsman lathe (Probably 1940ish)

It has flat ways.
I like it, I use it all the time.

I do not recommend a Flat ways lathe though.

I am restoring a Logan 200 10" lathe currently.
It was made in 1942.
It has a Vee way like most.

Before my Daddy passed away, he drug home a New Haven lathe.
It dates around 1890-1910.
It is a 14"-16" swing, I can't remember.
It's at the shop at Momma's.

With all that said I am a Sucker for old lathes.

But the bad thing about that is,
the parts that cannot be easily made For the lathe itself can
SOME times be bought on E BaYY for a Premium.:uhmk:

I also have a 7"x 10 HF mini lathe.:lol:

I Do NOT recommend a Lathe Mill combo.

They are hardly ever perpendicular to each other.

I have a Grizzly Mill drill.

Grizzly makes some good stuff,
Here is one in the price range.
Link: https://www.grizzly.com/products/gri...gearbox/g9972z

An older one is going to probably need work.

One more thing I have an Atlas 7B shaper.

Did I tell you I like old machines.;)

I will see if I can search for one other than that Grizzly tonight.

If you're still reading this:lol::lol:

I suggest no smaller than 10" swing.
At least 24" between centers.
I would stay away for variable drive.
But that's just me because I like old stuff.

Wait I allready told you that :blah::blah::exit:

Originally Posted by Keith Seymore (Post 9194080)

Maybe you could make the part truckster needs and get him going?

;)

Originally Posted by Keith Seymore (Post 9194080)

Maybe you could make the part truckster needs and get him going?

;)

Originally Posted by truckster (Post 9194395)

I welded an extension onto the existing lathe bed to accommodate the slightly longer lathe. I have it aligned and leveled. It took me some practice to get proper geometry on my cutting tools. I think I've got a pretty decent finish now.

I think my next project will be a tailstock die holder. I still need to get a 4-jaw chuck, but I haven't gotten that far yet. I'll probably also order a set of change gears so I can do some threading, but, aside from some advice, I don't know of anything else I would need.

Originally Posted by JJH Jimmy (Post 9194490)

Here is mine late 40’s early 50’s Atlas. It does everything I need. I would like to get a quick change tool holder in the future. I also have an Atlas drill press and it is still way better than the Chinese crap that is out there. Best part is there were both built in my hometown Kalamazoo.

Originally Posted by Getter-Done (Post 9194515)

Nice work on extension:metal:

Finish looks great. WD-40 is the best lubricate for aluminum.

I use a 4 jaw all the time to dial parts in to the 0.0005 range (when I can).

Once you get your 4 jaw and get used to it.

I suggest getting a 5C Collet Block Set.
Attachment 2266091

Then buy a set of 5C Collets

I buy alot of stuff from CDCO machinery.

Shars on ebay is also a good source to skip the shipping charge.

Originally Posted by JJH Jimmy (Post 9194490)

Here is mine late 40’s early 50’s Atlas. It does everything I need. I would like to get a quick change tool holder in the future. I also have an Atlas drill press and it is still way better than the Chinese crap that is out there. Best part is there were both built in my hometown Kalamazoo.