![]() |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Yeah, the gauges look great! I know some dude up in Jackson, that does pretty "decent" work:lol: . Thanks, again we enjoyed meeting everyone too. Come on down and we'll hammer your truck in no time. While I'm doing the bags, you can wire the gauges up:c2: . Any progress on the tailgate? |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
My compliments on the guage cluster(and everything).All the right stuff in the right place and looking good while doing it.Thumbs up!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
KUDOS again to Putter (with an assist to DJRacer!). |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
I'm really curious to know how it turns out for you. Very strange about people having problems w/ECE mounts - they worked like butter for me :confused: |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Quote:
I don't know what they are doing with the position of the mount as I know you 67-72 guys would have to drill new holes to get the 73-87 brackets on there, but if they mount like mine do, it will be way forward from the normal SBC position. I already knew I would have some grinding to do to miss the EGR port, but with the ECE mounts it was hitting the frame mount that they are selling you. With using the S&P mount I still had to clearance the EGR port, but with the ECE mounts I would have to cut it completely off, or cut a hole in the frame mount. I have been wanting to see Shifty's pics for comparison, just haven't had the time... As far as the front section of the frame, the 73-87 is the same as the 67-72. Which is why you can put a 73-87 under a 67-72 to upgrade one to newer parts. Fuel system I am using a 1987-91 EFI Blazer/Jimmy fuel tank, stock sending unit and a AC241 in tank pump. Out of the sending unit is 3 lines: supply, return, Evap. I am tying the same 3 lines from the LS motor into those lines using hardline down the frame and braided line at the front to the motor and at the rear to the tank. At the end of the hardline on the supply line is the standard AC fuel filter. I won't take up a ton more room than I already have hi-jacking your thread, but on Post #14 there are 2 shots of the front/rear of my fuel lines running down the passenger side of the framerail. When we pull the body back off after aligning the body panels up better I will post more pics to that thread. I may have some more at home also. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
http://www.ls1tech.com/forums/attach...chmentid=57781 Hart_Rod, Get these and you will be fine... (sent Shifty a PM on what they are off of) I am guessing a '98 F-body... |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Are these from a car or truck???? Where can I get them? Rob |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
There was someone here in Detroit with an identical rig running a sweet old 409 setup with A/C to boot. Same color . I think he was/is a GM service mechanic somewhere based on the stickers on the Burb.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
BUT... We have started the house. We have concrete and some garage walls already! (So there went my free time for the next SEVERAL months) |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Those are off of a 98 Camaro. I got them off ls1tech (before I stopped posting over there) for $40 shipped.
For a picture of all manifolds available for your application, please see this website which covers a 6.0L engine being put in a vehicle. It shows all manifolds that are stock for every year a ways down: http://www.4wheeloffroad.com/brandpa...ng/index1.html This link might go dead in the next 4-6 weeks, so ... if you're really interested in the info on there, you better right-click those pictures and "save as" with a descriptive title for your reference!! |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
1 Attachment(s)
Actually, for the sake of future usage, I am posting that portion here. Here is a caption and a picture which explains manifolds:
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
PS - another note, just because I can. The second one from the top is actually from a 99-00 F-body. Notice there is a hole for EGR provisions in the passenger side manifold. The '01-'02 had this deleted.
For flow, the top flow the worst but fit the best. The second from the top flow better and have heat shields on both sides, which is a plus, and flow better, but the flange on the passenger side contacted my ECE motor mounts. I wanted to try the truck manifolds, but ... couldn't find any easily. Maybe when I get up and running and actually put an exhaust system on the truck, I'll look into other options. I would really like to find some genuine headers to use... |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Shifty, you wouldn't happen to have an extra set of the top ones would ya? I'll be up there July 4th, might be able to help you a little on your bags.:lol:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
If you want, I can bring mine up when I come up there 4th of July weekend. Rob |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
lets just say if your truck ones fit on my setup and they're in good shape, we could definitely trade up if you're cool with that. i'm already using a truck oil pan, pickup, dip stick, lol, list goes on and on and on. might as well try the manifolds too.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
oh - and i only have a spare of the second from the top - they've been ground on a little to try to make em fit but nothing major. they're in good shape too. i'm reusing the cats for them because i don't have the resources to drill and weld a bung onto the manifolds - on the f-body manifolds, the passenger side manifolds dont have an O² bung on em, both bungs are on the cat.
do the truck manifolds have an O² bung on them anywhere? |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
i have truck manifolds and they dont fit at all!!!!!! ill see if i can get any pics up...
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
2 Attachment(s)
Quote:
Rob |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Didn't get as much done as I wanted to today, but I did get all the holes filled in the firewall (>50!!) and made some patch panels. I also stripped the factory wiring harness off my motor. That took about an hour.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
2 Attachment(s)
I started to stab the motor, but ran out of time. Just kidding, still a lot to do prior to that.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
OK, play time is over, taking the family on vacation. I didn't get as much done as I wanted, but I feel like I accomplished quite a bit (prior planning definitely helped). Hopefully, it is at a point now that I can knock out some serious progress in the evenings after work. Thanks for all the encouragement, comments and suggestions. I'll be back on it in a week or so.:metal:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Have a good one :metal: |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Wow should be nice when done, your parts will be waiting for you after the cruise.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Thanks Ed, I appreciate the help. Made it to first stop on trip, the in-laws in Sebring, FL (as in THE 12 Hours of Sebring). On the way down (9 hour drive), I was able to take care of some business. I ordered a 18 circuit Painless harness from Summit. Gave Stan at ECE a call for a tank and tranny crossmember (man, I knew I shoulda bought some of their stock!). Stan is doing a 6.0 install in his Suburban (I think I passed him this week!) I was telling him about all the issues with stock manifolds. He told me that he as been working with Sanderson to develop some new headers for the 5.3/6.0. :clap: He said they should be done in about a month.:drama: The first ones will be HPC coated. I asked him to ask Sanderson if they can make them in Stainless also.:metal: So hopefully the header issue will be put to rest. :ele: Stan also said that they had a great time doing the OverHaulin espisode. He said that there was a lot more work in the truck than was shown in the 40 minutes of air time. The truck was really worse than they thought, ie they had to replace the rockers, braces, cab corners.... He also said that all of the customizing ideas came from the guy's wife (Note to self: Be carful what you tell the little lady you would want to do to your truck if you could!) Stan would tell you all this himself, but he's to busy selling parts:dnd: . See everyone later. Rob |
All times are GMT -4. The time now is 04:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com