Re: Dolphin Quad Gauges - Not Recommended
The fix is now in place for the gauges.Radio Shack part number 276-1115 which is a 1/2 watt 470 ohm resistor to put in the yellow wire of the speedometer for the illumination issue
|
Re: Dolphin Quad Gauges - Not Recommended
Does this also work on the electronic speedo? also what about the other gauges that are dim
|
Re: Dolphin Quad Gauges - Not Recommended
It brings the led brightness of the new one touch speedo to match the others
|
Re: Dolphin Quad Gauges - Not Recommended
Are the new guages all LED lights? can we order the LEDs to go in where the incandecents are ?
|
Re: Dolphin Quad Gauges - Not Recommended
Leds are readily available at most parts stores in the rubber plug format like the dolphin incandescent style if you chose to put them in to have all the gauges with led brightness
|
Re: Dolphin Quad Gauges - Not Recommended
OK, I have all Dolphin and all are dim other than the TACH I just got. Do you know which ones will work? Or do I have to take everything apart to make sure I get the right size?
|
Re: Dolphin Quad Gauges - Not Recommended
Ill check for you for sizing.Just to clarify,you want led brightness in your other gauges?
|
Re: Dolphin Quad Gauges - Not Recommended
Yes sir, thank you!
|
Re: Dolphin Quad Gauges - Not Recommended
Once I get the sizes Ill shoot a reply to this thread
|
Re: Dolphin Quad Gauges - Not Recommended
In my initial post I specified my experience is only with the quad gauges so that is all I can provide my experience on.
The "fix" being touted here by EZ Wire is the same one they proposed to me years back. The "fix" does not increase the lighting of the gauge bucket but instead reduces the brightness of the speedometer bucket so that it is similar to the gauge bucket. I have no problem with the speedometer light level. I wanted the gauge bucket to be brighter. It seems the manufacturer is not comprehending the initial problem and skirting the issue. If they are serious about addressing the issue I would welcome a package in the mail that included a new set of instruments with brighter lighting that is consistent between the two units. |
Re: Dolphin Quad Gauges - Not Recommended
thanks for the tip. not buying now.
|
Re: Dolphin Quad Gauges - Not Recommended
Ez are you gonna offer up some info like you said you would?
Posted via Mobile Device |
Re: Dolphin Quad Gauges - Not Recommended
looking at these gauges- the quad, but now re-considering. thought i would bump this back up and see if the company wants to respond again- since it seems they dropped off the face of the earth when put to the test to back up what they claim????
|
Re: Dolphin Quad Gauges - Not Recommended
I have the dolphin gauges and because of the speedo is more lit up than the others. I'm going to Autometer gauges
Posted via Mobile Device |
Re: Dolphin Quad Gauges - Not Recommended
I have the six gauge set in my '66, I have the electronic speedo and it is a little brighter and whiter than the other gauges, but my bigger problem is that the speedometer is always showing 5-10 mph when I'm not moving, and the tach jumps around a lot even when I'm cruising down the highway. The quality is mediocre as far as I can tell, but I guess I can't expect much better when I got the whole set and the aluminum panel they set in for the price of a speedometer from AutoMeter.
|
Re: Dolphin Quad Gauges - Not Recommended
88lt1wagon,how accurate are the dolphin gauges? I have Equus 8000 gauges in my S10 and for a cheaper gauge seem to work good. I've used my Gps against my speedo and I'm 3 miles fast. I'm gonna keep it that way;)
|
Re: Dolphin Quad Gauges - Not Recommended
I think they were accurate until I changed the tires, I need to recalibrate the speedo before I try to measure against it, though. The tach bounces a lot like I said, which doesn't give me a lot of faith in their product.
|
Re: Dolphin Quad Gauges - Not Recommended
Glad I foun this thread. Speedhut for me.
|
Re: Dolphin Quad Gauges - Not Recommended
Quote:
I bought the Dolphin guages, installed the speedo and the quad along with the EZ Wiring harness, and the temp and oil guages did not work. After 2 tech calls, a new oil sending unit, they still were not working. THEN on 3rd call, tech says, send it back. 2 weeks later, I get new quad guage, install, still not owrking. Tech says again, loosen guage from back braket, I said, it is just sitting in dash, no braket. Now temp guage scew spins when I tried to put nut back on after testing today, now 2nd new temp guage purchase. Tech says to install new plugin supplied with new guage. This has not been a good experience for me. DOn't know if I will suggest Dolphin guages to anyone else??????? |
Re: Dolphin Quad Gauges - Not Recommended
I bought a speedo and a quad from Dolphin a few months ago, had a auto electric company install new EZ wiring harness and DOlphin guages. The Temp and Oil pressure do not work. After 2 calls to DOlphin tech, still not working. On 3rd call he said send them back in. @ weeks later, I get ne quad, install, still not working, then tech says you tightened the bracket too tight, no it is sitting in hole, still not working. Then after taking temp nut off again to test guage, the screw now twists. I have already bought 2nd oil sending unit for same issue now 2nd, temp sewnding unit. Still not working. Then calling tech again, he says to install the new pigtail to clip into back of quad????? WHAT???? Now I got to clip all 6 wires for new pigtail??? This has not been worth saving a few bucks over name brand guages...............
|
All times are GMT -4. The time now is 02:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com