Re: '62 longed going under the knife
Nice truck. Really good job with the metal work!
|
Re: '62 longed going under the knife
Very nice work:metal:. Thanks for the pics of the cab corners/rear cab supports I'm about to replace them and was unsure of what they were supposed to look like
|
Re: '62 longed going under the knife
nice work, glad you're saving that parts truck and turning it into a fine ride.
still lots to do but you've already done a ton. keep after it...:metal: |
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
1 Attachment(s)
A quick shot of the floor, rocker, and cab corner finished up
|
Re: '62 longed going under the knife
Looking good! Keep it up!
sub'd |
Re: '62 longed going under the knife
4 Attachment(s)
After getting the all the rust taken care of inside the cab I decided to lay it back to clean everything up with a wire wheel to get a nice clean undercoating on it
|
Re: '62 longed going under the knife
Fun fact...I have the same damn cut out in the center of my floor.
|
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
3 Attachment(s)
the grill shell that came with the truck I thought was in decent shape, but turns out every time I looked at it there was something else wrong or another little rust hole, But luckily I had an extra shell laying around that had some lower panel damage but no rust holes so I took the best of both and made it work
|
Re: '62 longed going under the knife
1 Attachment(s)
Here is a pic of a repair on the corner of the radiator support panel
|
Re: '62 longed going under the knife
2 Attachment(s)
Here is a better pic of the radiator support
|
Re: '62 longed going under the knife
1 Attachment(s)
getting the inner fenders cleaned up
|
Re: '62 longed going under the knife
1 Attachment(s)
Better pic of the finished cab corner I never posted
|
Re: '62 longed going under the knife
:metal:
|
Re: '62 longed going under the knife
Quote:
|
Re: '62 longed going under the knife
1 Attachment(s)
Making some pieces on the english wheel
|
Re: '62 longbed going under the knife
2 Attachment(s)
doing some repairs above the windshield inside the cab
|
Re: '62 longbed going under the knife
1 Attachment(s)
Got the gas tank cleaned up, I'm still up in the air about running this tank or putting one between the frame rails
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
Quote:
|
All times are GMT -4. The time now is 04:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com