Re: '62 BBW SWB Highschool ride returns
Got the fenders, and cowl pieces back from the sand blaster today. Didn't have much time so I started with the easiest piece. Cut a patch out of what was left from the fender patch panels.
http://i212.photobucket.com/albums/c...0216111734.jpg Didn't do much planning first, what do people do for an antenna after they plug the hole? Can I just hide the original under the hood? or do they make a special antenna? or am I just outta luck? http://i212.photobucket.com/albums/c...0216111755.jpg |
Re: '62 BBW SWB Highschool ride returns
Had a little more time tonight. So I started on a fender. This seems to be a common problem. All 4 fenders I have are worn from the front bumper in the same way. This one was the worst though.
http://i212.photobucket.com/albums/c...0217111754.jpg http://i212.photobucket.com/albums/c...0217111756.jpg Not perfect, but a thin coat of filler, and nobody else will know. http://i212.photobucket.com/albums/c...0217111804.jpg Went ahead and painted the inside of the fender braces with POR15 while I could still get to them. I put a hole in the bottom of the braces to let water & mud run out next time. I don't know what GM was thinking when they designed this. http://i212.photobucket.com/albums/c...0217111903.jpg I got one emblem hole welded up too. Now you see it. http://i212.photobucket.com/albums/c...0217111836.jpg Now you don't. http://i212.photobucket.com/albums/c...0217111845.jpg Here's a before pic I found. http://i212.photobucket.com/albums/c...p/IMG_0642.jpg |
Re: '62 BBW SWB Highschool ride returns
Kewl little project ... keep us posted.
Ratty 46 |
Re: '62 BBW SWB Highschool ride returns
All I wanted to do today was work on the truck... Yea right. Got up, and the house was freezing. Yup, the oil furnace was out of oil, and you can't get any delivered on a weekend. So it was off to the gas station for 25 gallons of diesel. Then since I had the company pickup I hauled a load of garbage off. Oh yea, why I had the company truck... The throttle linkage in my Corvair broke yesterday at lunch, so I left it at work, and drove the truck home. So I went back to the shop, and fixed the car. Turnes out the mount for part of the linkage had rusted off. Anyhow got it fixed, and by 4:00 I got out to the shop. First thing I did was break my last cutoff wheel, so... off to the store to get some... Finally got all the welding done on the fenders. So tomorrow I get to shoot the DP90 on everything.
http://i212.photobucket.com/albums/c...0218111748.jpg http://i212.photobucket.com/albums/c...0218111849.jpg and the Passenger side. http://i212.photobucket.com/albums/c...0219112035.jpg |
Re: '62 BBW SWB Highschool ride returns
I hate it when I have days like that. Better luck tomorrow.......DP90 huh? Have you ever tried the NCP275? I don't use either anymore, but I had switched to the NCP from the DP series. The NCP doesn't have the isocyanyde and one other chemicle in it. I've found a less expensive epoxy primer that is just as good if not better. It's made by Northstar.
Are you tigging those patches in? |
Re: '62 BBW SWB Highschool ride returns
Quote:
There are soo many different brands and part numbers of primers, I get overwhelmed trying to figure it all out. I've never used the NCP275 before, just the DP for bare metal primer & sealer. I read a lot about SPI epoxy primer & clear, but they don't have a rep in the area. If I felt more confident about what I was doing, I might order some and try it. But I just went with what the local paint guy recomended. He didn't try to sell me the top of the line on everything, and he sounded like he knew what he was talking about, so I'm trusting his judgment this time. I'll have to check the Northstar brand, maybe there is a rep here in town. All the panels are TIG welded. I just love how nice & slow I can go with it. I always feel like I'm in a race with the MIG... squeeze & go as fast as I can so it doesn't burn a hole. With the TIG I can melt a drop of filler rod, then heat it up a bit, and flow it into a nice spot weld. So much easier. Got everything bondo'd... http://i212.photobucket.com/albums/c...0220111426.jpg I know I'm no Steve Frisbie, but... http://i212.photobucket.com/albums/c...0220111547.jpg http://i212.photobucket.com/albums/c...0220111642.jpg Nobody will know now :) Heck maybe I should have gone black ??? |
Re: '62 BBW SWB Highschool ride returns
Hey like the thread....your doing great...I have my 1969 Z/28 camaro that i bought in pieces when i was in high school....it's getting done again as we speak and this will make the third time around for it. Every time i sit in that seat i lose 40 lbs and 20 yrs....lol. As for more then 1 project at a time, well it happens.....I so get that too..nice meeting you. I will be back to keep a eye on your progress you doing great work over there
|
Re: '62 BBW SWB Highschool ride returns
Here is their website. The company is actually Lusid Technologies in Salt Lake City, and one of their brands is Northstar. A friend of mine that does high end body and paint prefers their epoxy primer over other brands. Lusid's chemist told him that the Northstar EP210 epoxy primer was originally designed for use on submarines. So it should be some good stuff. I know I like using it, and it's less $$ than PPG. I've used their polyurethane's as well with good results.
http://www.lusidtechnologies.com/ Your body work is looking good, and you're making nice proogress too. |
Re: '62 BBW SWB Highschool ride returns
Love the holidays.. what was this one anyhow, mattress sale day?
I got an early start. Went out and turned on both propane heaters, then went and had a cup of coffee while the shop warmed up. Got everything primered with Slick Sand. http://i212.photobucket.com/albums/c...0221111116.jpg Even got part of the boys Quarter Midget primed. http://i212.photobucket.com/albums/c...0221111124.jpg After lunch I sanded most of it back off. http://i212.photobucket.com/albums/c...0221111523.jpg Last pic... of work :) Looks just like this morning, everything in a fresh coat of Slick Sand... DOH !!! http://i212.photobucket.com/albums/c...0221111609.jpg Time to sit back and watch the paint dry. :) http://i212.photobucket.com/albums/c...0221111306.jpg |
Re: '62 BBW SWB Highschool ride returns
Well, got some paint on the fenders
http://i212.photobucket.com/albums/c...0224111057.jpg and cowls. Finally... I had two propane heaters, two electric heaters, and every halogen light I could find. Still not really warm enough. I think the weather is trying to tell me to take the cab apart next. Maybe by the time I get it stripped it will be warm enough to paint again. http://i212.photobucket.com/albums/c...0224111059.jpg |
Re: '62 BBW SWB Highschool ride returns
Hey, Nice job on the fenders and cowl peices. I want to paint my truck in peices like your doing but im worried about the peices not matching when im done. I guess it depends on what color and making sure you use the same amount of coats on each panel plus buying all the paint at the same time. Are you just painting them in your shop or outside? Are you using single stage paint or base coat clear coat?
my 64 C10 build:http://67-72chevytrucks.com/vboard/s...d.php?t=439559 |
Re: '62 BBW SWB Highschool ride returns
Quote:
It's Omni (PPG's cheap line) base coat clear coat. Your truck is lookin good. Wish you were closer, I would like that long bed. |
Re: '62 BBW SWB Highschool ride returns
Absolutely beautiful. The workmanship really shows up in the black finish.
|
Re: '62 BBW SWB Highschool ride returns
That is some great work man! Very inspiring to see your progress.:metal:
|
Re: '62 BBW SWB Highschool ride returns
Those are looking real nice :thumbs:
You must have got your primer issue solved? |
Re: '62 BBW SWB Highschool ride returns
Nice work :metal:
I'll be doing my front fender patches soon. You make it look easy ;) Keep up the awesome work and keep the pics coming :ito: Tony |
Re: '62 BBW SWB Highschool ride returns
I have used the nason brand before, I think thats about the same as the omni. thats what I think im going to do also. My neighbor bought a new jeep last year and I love the bright red on it. Think im going to get the paint code off it and paint mine that color, its a solid color also. Im in th process of tearing the floor out of that long bed to get the floor braces I need for my short bed. I wish I could find someone to buy those bed sides, I would let them go real cheap.
my build 64 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=439559 |
Re: '62 BBW SWB Highschool ride returns
Time for a little update. It's been too cold to paint, so... I got comfortable in the basement with my sewing machine, and made a new seat cover. White vinyl with blue cloth inserts. I have enough of each left over to cover the metal door panels too.
http://i212.photobucket.com/albums/c...0317112029.jpg |
Re: '62 BBW SWB Highschool ride returns
I've been wondering what happened to you.
|
Re: '62 BBW SWB Highschool ride returns
i like ur truck any progress lately?? i did a lil to mine this past weekend!! not much just some, lol!! n-e-ways i think doing a lil at a time is the way to go!! that way u can see progress and not be bummed that ur not!! whats next the hood then the cab or..??
|
Re: '62 BBW SWB Highschool ride returns
The seat is all done. The weather is warming up, so I'm back to painting. After looking at the front fenders, they needed redone. There were a couple of noticable flaws in each. So right now I'm sanding them a bit, and getting ready to shoot them again.
Posted via Mobile Device |
Re: '62 BBW SWB Highschool ride returns
Wow you sew too ?....
I can weld....I can spread bondo....but I can't sew . Your moving right along good job. |
Re: '62 BBW SWB Highschool ride returns
The weather has sucked latley, I need to put a roof on my shed, but it keeps raining. At least it forced me to work on the truck again. Figured it was time to get the cab done, so I can start putting all these pretty parts on something.
I started with the back since it was looking right at me. http://i212.photobucket.com/albums/c...0617111648.jpg Picked up something to keep me busy for a while, cab corners, and floor patches. Shoulda got some rocker panels too.. :( http://i212.photobucket.com/albums/c...0617111640.jpg The drivers cab corner isn't too bad. http://i212.photobucket.com/albums/c...0617111735.jpg Now it is :) http://i212.photobucket.com/albums/c...0617111744.jpg That looks better. http://i212.photobucket.com/albums/c...0618111529.jpg All shiny again. http://i212.photobucket.com/albums/c...0618111618.jpg Passengers side looked about the same, but I forgot to get a before pic. http://i212.photobucket.com/albums/c...0619110828.jpg All patched up. http://i212.photobucket.com/albums/c...0619110923.jpg And finally coated with Epoxy. http://i212.photobucket.com/albums/c...0619111150.jpg Next I think I'll do the rockers. Any tips on doing them? I am half tempted to leave the cab sitting like it is, on the firewall. It would make getting to the spot welds really easy. I'm just afraid of the thing distorting when I cut the rocker off. |
Re: '62 BBW SWB Highschool ride returns
Put in a few more hours this weekend. Had to strip the inside of the cab.
First we tipped the cab up on its side so I could strip the roof. http://i212.photobucket.com/albums/c...0701111812.jpg Shiny... http://i212.photobucket.com/albums/c...0701112010.jpg Then I did the dash. There's lots of little nooks and crannies to get into. http://i212.photobucket.com/albums/c...0701112012.jpg Treated with Zinc wash, and epoxy primer. http://i212.photobucket.com/albums/c...0701112053.jpg Time to start fixing rust. The rockers, part of the floor, and the kick panels were rusty. First step was get the rusted parts off. http://i212.photobucket.com/albums/c...0703111215.jpg Cut the rusted floor out. http://i212.photobucket.com/albums/c...0703111827.jpg Treated all of the bare metal, then painted it with POR15. http://i212.photobucket.com/albums/c...0703111840.jpg Just overlapped the floor patch, and welded it on top of the good metal. http://i212.photobucket.com/albums/c...0704111557.jpg Got the rocker on, and spot welded solid. http://i212.photobucket.com/albums/c...0704111742.jpg Now on to the other side.... |
Re: '62 BBW SWB Highschool ride returns
That looks good, I know how it feels to be putting metal back in after cutting and grinding and cleaning rust, just be sure to seal that overlap joint really well or you will have rust in a few years !!
Quote:
|
All times are GMT -4. The time now is 02:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com