![]() |
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
Well, unfortunately, after trying all weekend to get the V6 back in and still have clearance to lay frame we came to the conclusion that it isn't going to fit. So now I guess I have to find a new motor and tranny. I really wanted to keep the 6 but it's just too big. I'm so bummed right now.
|
Re: '63 GMC Project
NO! That really sucks man. What kind of engine do you think you'll go with?
|
Re: '63 GMC Project
I'll probably end up getting a plain old crate 350. Since I have to get a different motor I might as well get one I don't have to clean :lol:
|
Re: '63 GMC Project
Too bad you couldn’t keep the V6, but they are monsters in size and weight. I was amazed how much more clearance there was when I switched to a 350. It’s pretty obvious when you compare where the valve cover fits the notch in the firewall.
http://img687.imageshack.us/img687/6899/93458529.jpg http://img204.imageshack.us/img204/5605/94661517.jpg |
Re: '63 GMC Project
Boo! But I still wouldn't mind having a nice, well-built 350 or 327 sitting around for mine. Maybe once we get the shop put up and I have somewhere to put it.
|
Re: '63 GMC Project
does the 305 use the same mounts as the small blocks? I know you got the SD mount but I'm just wondering.
|
Re: '63 GMC Project
Sweet build, i love it!!! Joseph
|
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
Feel free to send me some parts off of that motor though. I can always use them because it'll be in there for awhile. ;)
|
Re: '63 GMC Project
Yeah i knew that Creep. You gonna get Jason to bend you up some new ones. It wouldn't be that hard to make some yourself either if you had the stuff.
|
Re: '63 GMC Project
Yeah I ordered a new set of mounts from SD. We used the other parts to make mounts for the V6.
Twiggy, give me a couple of weeks grievance period then I might have a few things from the 305 I could part with. |
Re: '63 GMC Project
Yeah I think I'd need the grievance time too. Was there anything that could have been done in any way to make it fit? Was it only when aired out or just general clearance with the firewall and other components?
|
Re: '63 GMC Project
To get it to lay out the motor would have to move up 4" which would put the clutch fork into the firewall and the top of the carb through the hood. It may be technically possible but it would be way too much work and it wouldn't be pretty at all.
|
Re: '63 GMC Project
that's what I'm wanting to know
|
Re: '63 GMC Project
So your saying that you could stick it through the hood and stab a blower on it and make it look like a tiny mouse motor. Sweet
|
Re: '63 GMC Project
Slow progress is better than no progress, I guess.
http://i9.photobucket.com/albums/a91...p/DSC02942.jpg http://i9.photobucket.com/albums/a91...p/DSC02943.jpg http://i9.photobucket.com/albums/a91...p/DSC02944.jpg http://i9.photobucket.com/albums/a91...p/DSC05248.jpg http://i9.photobucket.com/albums/a91...p/DSC05250.jpg http://i9.photobucket.com/albums/a91...p/DSC05251.jpg http://i9.photobucket.com/albums/a91...p/DSC05254.jpg |
Re: '63 GMC Project
We finally got the notches in today but we're going to hold off on the axle for a bit because I might be able to trade the 10 bolt Chevelle axle for a 12 bolt truck axle. since I can't find anyone around here to redrill axles replacing the axle shafts in the trucks 12 bolt with 5 on 5" axle shafts would be cheaper than having some custom made for the Chevelle rear end.
http://i9.photobucket.com/albums/a91...p/DSC05277.jpg http://i9.photobucket.com/albums/a91...p/DSC05278.jpg http://i9.photobucket.com/albums/a91...p/DSC05279.jpg |
Re: '63 GMC Project
Man that is sweet. How long are the upper and lower links? I got to figure out some stuff on mine.
|
Re: '63 GMC Project
I don't know what the exact lengths are yet. I will measure them for you next time I go out to work on it. Unfortunately it will probably be next weekend before I make it out there because it's at my buddy's house and it's about a 20 to 25 minute drive. I called suicidedoors and they told me it should be at the factory wheelbase (127") at ride height and will pull forward just slightly when layed out.
|
Re: '63 GMC Project
what you setting ride hight at. I'm setting mine at 4". Yours is LWB right?
|
Re: '63 GMC Project
Yeah mine's a longbed.
I don't know how much space I'll have under the frame yet. I've always heard that 3 and 4 link suspensions should be set up so the bars are parallel with the ground at ride height. assuming that's the case, I would guess somewhere in the 6" to 8" range. I'm going to call SD tomorrow to find out. |
Re: '63 GMC Project
What kind of front crossmember and setup is that creep?
|
Re: '63 GMC Project
That is the P-51 set up from www.***************** I have the same one.
|
Re: '63 GMC Project
Let me know how far you set your axle from the rear cab mounts at ride height. I believe it's 56". I'm going to set my pinion at ride height, then drop it to the ground before I mount the bags. I'm not going to run very much air in the rear to lift it. I hope I'm going in the right direction.
|
All times are GMT -4. The time now is 11:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com