Re: 72 Suburban Started
1 Attachment(s)
Had to work today at the fire station today but it gives me time to search the internet for parts. I have been on LMC and Brothers are there any other site I need to look. Trying to locate the patch panel I need for the passengers. Looks like I need the front floor pan, inside kick panel, front complete cab support, inside rocker and rocker panel plus the lower pillar.. Anything left?
|
Re: 72 Suburban Started
Well I made my mind up and I will be installing a 1971 Chevy 350 in the burb, I have the old 305 that came out and a 2006 LS motor but I was saving the LS for another build. The 350 is a complete running motor the started life in a 71 Monte Carlo that Mike Nutt built in the mid 80's it was pulled out to make way for a 396 it was and refreshed and placed into a 78 Malibu the the malibu was wrecked in the mid 90's it was pulled again and placed into another 78/79 Malibu were is sat for over 10 years in the garage untill 2004 and then it was pulled again and it has been in my shop on a motor stand for 8 years. The engine probably has less than 15,000 on it since the refresh in the mid 80,s. Bcubed my be able to help with the history he now has the malibu with the that has a 327 in it now, by the way the 327 was built by him and Mike back in the early 90's and did not have a home untill 2004 when it was placed into the malibu...
|
Re: 72 Suburban Started
Here are some pictures from pulling the engine and suspension.
http://img.photobucket.com/albums/v2...ban3-3-121.jpg http://img.photobucket.com/albums/v2...an3-3-1214.jpg http://img.photobucket.com/albums/v2...an3-3-1217.jpg http://img.photobucket.com/albums/v2...an3-3-1219.jpg http://img.photobucket.com/albums/v2...an3-3-1239.jpg http://img.photobucket.com/albums/v2...an3-3-1240.jpg http://img.photobucket.com/albums/v2...an3-3-1245.jpg |
Re: 72 Suburban Started
Will 8" ID sch 40 pipe work for cupping the lower control arms or will I need 8.5 - 9" I aready have the 8" pipe and if I use 2600 bags will it clear or will I have to 2500.
|
Re: 72 Suburban Started
Came home today and decided to remove the transmission from the old 305 only to see that someone jackassed the housing with JB WELD where the coolant lines are connected. So I will be locating a new trans or finding a good housing and rebuilding the old one.
|
Re: 72 Suburban Started
Quote:
Does anyone just sell the upper plates? I know Suicide Doors sells the whole kit, but if he were to cup his lower arms and by different bags, would only really need the upper plates. http://67-72chevytrucks.com/vboard/a...5&d=1293086861 http://67-72chevytrucks.com/vboard/a...6&d=1293086861 http://67-72chevytrucks.com/vboard/a...6&d=1293087019 http://67-72chevytrucks.com/vboard/s...d.php?t=436787 |
Re: 72 Suburban Started
Well I need to decide on an engine to run. I have a good 350 that Bcubed has made available but I will need to find a 350/400 turbo transmission or install a 2006 LQ4 I have but it will need a Painless 60221 Gen III Truck Harness about $1000.00 ( input needed)
|
Re: 72 Suburban Started
I will be installing the 350 trying to keep it simple and this engine is in goood shape.
|
Re: 72 Suburban Started
At work again tonight pulling a 48 hour shift so not much done today but I was able to remove the UAR bushings today and 40 year or rust made it hard job not a drop of grease was in them and I order the front brakes system from brothers tomorrow I will order the front air bags. Most of the front frame is cleaned and I will start the fire wall this weekend.
|
Re: 72 Suburban Started
Please subscribed to post a WTB...see post below by 'gcburdic'
|
Re: 72 Suburban Started
Made it home after a long night we had to fly a patient to UAB and I have to go back to Montgomery to work for another 16 hours No PAY NO PLAY...
|
Re: 72 Suburban Started
Quote:
BTW...you need to be a subscribing member to post want to buy type post like above...please read through this and subscribe to post a WTB over in the parts forum....I'm sure many members would be able to help ya out.... |
Re: 72 Suburban Started
Will do sorry, but now I know.....
|
Re: 72 Suburban Started
Today I ordered all of my passenger side body panels, core support, front air kit and bags and some odd bolts and things. I will be adding photos this weekend of the progress.
|
Re: 72 Suburban Started
lookin forward to watchin this build!
|
Re: 72 Suburban Started
Went to Harbor Freight for some supplies for the weekend and to the welding shop for a new mig gas regulator. I hope to have some part in today so I will be able to work and I promise to update the photos, My computer at home is acting up...
|
Re: 72 Suburban Started
Quote:
|
Re: 72 Suburban Started
I know Molly is not happy and at work our computers are on a network so we cannot add photos.
|
Re: 72 Suburban Started
5 Attachment(s)
Made it home and I was able to work on the old project a little before it got dark. The rear panel came in from Brothers and I was able to start on it.Attachment 887269
The A-Arm have been Sand-blasted and ready to install the bottom cups Attachment 887270 The rear after cutting off the old panel Attachment 887271 After a lot of sanding and cleaning it was sprayed Attachment 887272 Not near ready for fitting but it is a start Attachment 887273 |
Re: 72 Suburban Started
By the way the A-Arm shaft was a pain to get the caps off I only hope the bottom A-Arms are not as bad, I had to put a cheater bar on my wrench and still it took all of my weight to remove it.
|
Re: 72 Suburban Started
nice progress...i know your cupping the front with drop spindles but what setup are you going to run in the rear?
|
Re: 72 Suburban Started
Quote:
|
Re: 72 Suburban Started
After a lond day we were able to fit the rear panel, the inter structure was completely rusted out so I had to fab all of it with 16 ga steel 1st before I could fit the panel. It not great but all of the rust is gone and I am not too bad at blocking and filling. Bcubed will be posting some pic's of our progress.
|
Re: 72 Suburban Started
Quote:
|
All times are GMT -4. The time now is 09:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com