Re: Previous owner '68
Good progress
|
Re: Previous owner '68
1 Attachment(s)
That Jack saves the day again! Perfect for doors.
Quote:
|
Re: Previous owner '68
That is a Handy-Dandy jack.:metal:
|
Re: Previous owner '68
1 Attachment(s)
Quote:
|
Re: Previous owner '68
1 Attachment(s)
I decided to replace the cab mounts so I jacked up the cab for access.
|
Re: Previous owner '68
1 Attachment(s)
Which quickly turned into this. I think this is called the snowball affect. Yeap, using that jack once again.
|
Re: Previous owner '68
Yeah the snowball effect happens alot.;)
Then when the Snowball melts you are going down the Rabbit Hole. :lol: Great progress. :metal::metal::metal: |
Re: Previous owner '68
Quote:
|
Re: Previous owner '68
I have been noodling on how to semi-safely remove the bed from my truck, in a single garage bay, by myself, with no special tools to speak of. I approve of your methods :chevy:
I'm thinking about some sort of block-and-tackle arrangement myself. OSHA, more cat videos for you guys! |
Re: Previous owner '68
Also, now that I look again, I am very curious about what appears to be a 2nd-gen Firebird in the background of those bed-removal photos.
|
Re: Previous owner '68
1 Attachment(s)
Quote:
Quote:
|
Re: Previous owner '68
1 Attachment(s)
Quote:
...sorry, now back to the truck resto... |
Re: Previous owner '68
1 Attachment(s)
Nice looking car, I'm a fan of the '76, the bumpers flow better than the '74-'75 and I am burnt out on black and gold 77-78's. At least you had 4-speeds, my 73 is a 350 auto.
I had a '73 Trans Am when I was in the Navy and always wanted another one but the prices were not something I was willing to spend. I found this '73 Esprit and have slowly been upgrading it to be what I want. It will end up a 400 4-speed. One more pic then back to trucks! Rg |
Re: Previous owner '68
Very curious to see how the truck turns out.. And now the pontiac too lol
|
Re: Previous owner '68
Quote:
|
Re: Previous owner '68
Quote:
|
Re: Previous owner '68
Quote:
A kid in high school had a Formula with the "nostrils", white with twin green stripes, and I loved it..... |
Re: Previous owner '68
Quote:
|
Re: Previous owner '68
I do too Jim, hopefully you can save it.
|
Re: Previous owner '68
1 Attachment(s)
Back to trucks! I threw some rollers on the rearend so I could roll it around easier. Ha! I'm an idiot, it's a posi. Rolls good going straight, not so good around the corners.
|
Re: Previous owner '68
1 Attachment(s)
Used the plasma cutter to cut Pacman out of the rear crossmember. Be looking for this on Facebook marketplace under "NOS 1968 Pacman - no lowballers, I know what I got"
|
Re: Previous owner '68
1 Attachment(s)
This had the added benefit of making a good place to run exhaust through in the future. I did finish the holes off by welding in some pieces of 4" pipe.
|
Re: Previous owner '68
1 Attachment(s)
I had to flip the frame to weld the bottom section of the cross-member exhaust pass throughs. Flipping the frame was fun and scary! While i had it flipped I cut it for a c-notch and painted the bottom. Should have taken more pics, but when I'm on a roll it's hard to remember.
|
Re: Previous owner '68
2 Attachment(s)
Then I flipped the frame (for the last time!) You'll notice that I removed the front cross-member, mostly to clean out the years of rust, grease, and mud.
|
Re: Previous owner '68
2 Attachment(s)
Now, I wanted to go five lug with this truck and I had the front cross-member from a '85 chevy truck that I decided to use. I know, I could have used the old cross-member and just used different balljoints and tierod ends but this is how I did it. If you are interested in the many different ways to do the drum to disc swap you should read this thread by lolife99. It says it all better than I ever could.
https://67-72chevytrucks.com/vboard/...d.php?t=444815 It was filthy. And I ain't gonna kid you, getting those springs out was a bear. |
All times are GMT -4. The time now is 07:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com