joelboxt, my combo is my signature. I like the Demon alot. I recently had it tuned by a local racer and it's awesome!. If you are serious about a Demon, I would call them or email them for a recommendation. If you are still stock, the Road Demon Jr. might be good but ask them. :metal:

I'm running an Edelbrock Performer RPM air-gap intake and 1406 carb. I used to like the carb but it is way too small for the heads and cam I put on the engine so I will probably go with a 670 or 700 eventually.

tunnel ram and 2 450 holleys

Same here, though I want to go with the Edelbrock Air Gap RPM intake. I hear they make even more power than the Performer RPM.

Todd

We just put a Edelbrock Performer intake and 1406 carb on my dad's 350. It works good for what he uses it for.

Nik

1250 dominator

350.....
 

350 enging....would always go with a 600 cfm....unless it's very hopped up....

I'm using a 1405 with the carter mod kit installed on top of an old Weiand single plane high rise. Works great.

crosswind(air gap) and speed demon 750.purchasing hurricane right now for 70 camaro project,and will be adding demon on it,

I've got a Performer RPM with an edelbrock 1806 thunder series 650cfm with electric choke

I got a 1406 Eldebrock on my 350 in my '79. I like it except for the electrical choke. Pretty stock 350 from what I can tell. Have a stock Q-Jet on my '81 and it does pretty well, could use a rebuild.
-Later