Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

RED71: Yes, you are exactly right. There is more clearance because you are back further from that big crossmember. Stock 4spd trucks did place the v8 eng in the back position, so you should be able to run longer 45 degree pipes and clear the stock starter, like on the 4x4.

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Sent you another PM...

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

pickmup do you still have a few sets (atleast 1 set) still available?? i have a friend that actually is rebuilding a vette & i think he might be interested.

thanks!!!
rodstored-72

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Here comes paypal. Thanks Frank!!

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

ttt

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

sent you a pm

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

WAIT--Don't send any more $$$
I ran out of manifolds and so did my distributor. So I am checking on resupply, but don't know yet.
I have everyone covered, except olblue. I will PM you for refund, or other alternatives.
Tim Young ordered two of the other side, as we have a few of those left. He said he will just tap & plug the 1/4" holes at the top & bottom of the little inside heat tube. They are otherwise the same manifold.
If anyone else would like two of the other side with the heat tube, let me know first and I will verify stock before you pay.
I will let everyone know when the next shipment is due.
Thanks again for all of the orders...Frank

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

when do you think the next shipment will be ready, I want the whole setup with the pipes and all

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

do you know what the part number is for that starter

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Frank,
Recieved the manifolds, perfect, thanks

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Got mine. Thanks again.

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

How much for just;
Thanx
Dano

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

No news-yet.
I don't have the starter part #, but it is the very common staggered GM mini starter. Check Ebay for some good deals.
I don't sell separate special parts, like the 45 pipes, from the "systems" I offer. It usually means someone wants to buy their common parts somewhere else, and just the hard stuff from me. I don't have time for that. I did explain how it was done, if you want to do it yourself.
Thanks everyone. I will stay in touch.

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Sorry I asked. Didn't mean to want waste your time.
Some guys on this board can't weld and I already have a set of corvette exh manifolds.

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

will they work with a 3 on the tree

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

ill take a et when you are ready. pm you

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

ill take a set when you are ready,pm you

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Paypal Sent Thanks

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

I thought they were sold out?

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

1loc10, i bought 2 of the ones with a heat tube hole, passanger side.im just going to weld up the wole before i get the coated.i did the same thing to my factory ones.

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

pickmup,
do you have any left???

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

I can tell you that my 95 sub has the mini-style starter on it as a point of reference..

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

I got mine today, love them, sent them out to get chromed, cant wait to get them on. thanks

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

please let me know when you get more in, I should have ordered earlier...

Mike

Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD
 

Also definately interested when you get some more in!