The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Here are some parts I took off a few trucks (https://67-72chevytrucks.com/vboard/showthread.php?t=245977)

skunkwerx 06-18-2007 09:20 PM

Re: Here are some parts I took off a few trucks
 
do you have any front fender wheel well trim for 67-68?thanks

teeitup 06-18-2007 10:53 PM

Re: Here are some parts I took off a few trucks
 
Walts, Pm'd you back, Thanks
Uncle, Tim, I'll PM you info
Longhorn Man, Andy, One is nice one is, the other is driver condition. $15 for pair brought to Boss's place
David, $29 shipped for the pair without ALT
Skunkwerx, sorry none right now
Thanks Randy

D.PASSMORE 06-18-2007 11:39 PM

Re: Here are some parts I took off a few trucks
 
Ok,
I'll take the two peices and the bottom bolt with the spacer. Don't see your addy in my files, could you send again?

Question: I need the exhaust manifold bolt that a 4x4 dipstick tube mounts up to, got ONE?

Thanks, DP

teeitup 06-18-2007 11:45 PM

Re: Here are some parts I took off a few trucks
 
I'll pm you David, sure bolt and spacer too!!!;)
Sorry no exhaust manifold bolt
Thanks Randy

OLDIRON69 06-19-2007 08:26 AM

Re: Here are some parts I took off a few trucks
 
How much for a pair of door sill plate's to 75754

teeitup 06-19-2007 08:47 AM

Re: Here are some parts I took off a few trucks
 
I got is a set of NOS ones on another thread for $20 plus shipping. I do have one used one $5 plus shipping. Thanks Randy

396muncie 06-19-2007 10:13 AM

Re: Here are some parts I took off a few trucks
 
I believe it's pic 27, the lighter socket and red/green wiring. Also, is the red wire beside it the power wire for the radio? If so, how much for the above things shipped to 17520? Thanks

OLDIRON69 06-19-2007 11:55 AM

Re: Here are some parts I took off a few trucks
 
If you have the new one's I'll take those or a good used pair, how much for one of the shrouds. I need one for my '69 small block truck.

oldschooler 06-19-2007 12:31 PM

Re: Here are some parts I took off a few trucks
 
how much for a non-air heater control? Shipped to 17362. Thanks, Rich

teeitup 06-19-2007 01:08 PM

Re: Here are some parts I took off a few trucks
 
396muncie, the red wire is for another lighter, the green and red wire is for that lighter. $13 shipped for the red/green wire and lighter
Oldiron, The door sills sold on the other thread sorry, I do have one used one left for $5, I have one shroud with a small crack but its not noticeable when mounted, $20 plus shipping, or I got another shroud with no cracks for $25 plus shipping
Oldschooler, Rich, I priced them both to a guy last night for $20 for the pair shipped, they both have had the face screwed back on
Thanks let me know, Randy

IvelDesigns 06-19-2007 02:00 PM

Re: Here are some parts I took off a few trucks
 
how much for one of the non-A/C heater controls shipped to 50325?

How good of shape are they in?

OLDIRON69 06-19-2007 02:24 PM

Re: Here are some parts I took off a few trucks
 
The door sills you have left..do you have a pair? and I'll take the shroud without a crack for $25.00. I can paypal you the cash, just send me a PM, consider them sold.

semperfidoordie 06-19-2007 02:48 PM

Re: Here are some parts I took off a few trucks
 
how much for the radio and bench seat to 92145?

stynchrr 06-19-2007 03:08 PM

Re: Here are some parts I took off a few trucks
 
What shape is the metal thing that goes over the Ram horn for the heat riser. Did i see some heat sheilds for the spark plugs? Is there a set? 19934
Thanks Tim

67ChevyRedneck 06-19-2007 04:05 PM

Re: Here are some parts I took off a few trucks
 
I see in pic 30 that you have a set of black dash vents. I'm installing a vintage air kit and one of the adapters is oval and both my vents are round (I guess a P.O. swapped the oval one out?)

I really only need the oval one, but I could take both if necessary.

Let me know, thanks. Shipping would be to 29650.

uncle 06-19-2007 05:14 PM

Re: Here are some parts I took off a few trucks
 
What's the carb in pic #25. Also ,what year is it from? Is it complete including all the choke pieces? By that, I mean does it have the parts that bolt to the intake and the rod that goes from the carb to the choke. I'll paypal you after your response on the carb. Thanks again.

396muncie 06-19-2007 06:14 PM

Re: Here are some parts I took off a few trucks
 
[QUOTE=teeitup;2229561]396muncie, the red wire is for another lighter, the green and red wire is for that lighter. $13 shipped for the red/green wire and lighter

Sounds good, let me know Paypal info and I'll send payment. Thanks

teeitup 06-19-2007 06:20 PM

Re: Here are some parts I took off a few trucks
 
My camera is acting up so sorry no more pics right now.
Iveldesigns, they both have been screwed together at teh face, $20 for pair shipped
Oldiron, I only got one left, no pairs. I'll get a shipping price asap on shroud
Semper, sorry both have been sold
Stynchrr, Tim, it has some rust, you can kind of see in pic, I'd take another for you but my camera is acting up. $29 shipped for it
67redneck, both of mine are round too, sorry
Uncle, Tim, I just unbolted it from intake, and took off rod that goes to gas pedal. Off a 69 350. $29 shipped
396Muncie, I'll pm you
Thanks Randy

uncle 06-19-2007 06:46 PM

Re: Here are some parts I took off a few trucks
 
pm sent.

Longhorn Man 06-19-2007 07:23 PM

Re: Here are some parts I took off a few trucks
 
I'll take the door panels for 15 at Boss's place.
Do you have any of the retainers in chrome?

teeitup 06-19-2007 07:32 PM

Re: Here are some parts I took off a few trucks
 
Tim, Pm'd you back
Andy, I'll set them back for you. I do have a set a chrome retainers $10 for them.
Thanks Randy

IvelDesigns 06-19-2007 07:41 PM

Re: Here are some parts I took off a few trucks
 
Quote:

Originally Posted by teeitup (Post 2229960)
Iveldesigns, they both have been screwed together at teh face, $20 for pair shipped

do you mean the face has been screwed to the assembly that the cables are in?

Longhorn Man 06-19-2007 07:45 PM

Re: Here are some parts I took off a few trucks
 
cool... 25 bucks then.
See you there! :D

teeitup 06-19-2007 07:56 PM

Re: Here are some parts I took off a few trucks
 
Ivel, yes thats what is done to one of them, the other has a broken arm too
Andy, sounds good!! Look forward to meeting you!!:)
Thanks Randy

67ChevyRedneck 06-20-2007 01:57 PM

Re: Here are some parts I took off a few trucks
 
Quote:

Originally Posted by teeitup (Post 2229960)
67redneck, both of mine are round too, sorry

Thanks. Oh well, I'll make it work somehow :lol:


All times are GMT -4. The time now is 01:30 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com