The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   1972 cab panels and parts (https://67-72chevytrucks.com/vboard/showthread.php?t=281142)

TotalChevy1 03-04-2008 10:18 PM

Re: 1972 cab panels and parts
 
How much for the door panels, if still for sale, do you have pics of both

Thanks

bestchevyfan 03-05-2008 02:44 AM

Re: 1972 cab panels and parts
 
Hey, I Talked To You About Cutting A Part Of The Outside Firewall
In Your Last Post. The Part I Need Is The Rail That Runs Across Under The Windshield It Holds The Wires/wire Harness. It Runs Across The Top Of The Heater Box...you Quoted A Price Of I Think $20.00 Plus Shipping. See Picture Thanks Buddy.

otsenre 03-05-2008 04:03 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by 67CHIP72 (Post 2608049)
Are you cutting this cab? If so, is this panel still available?

Here is pic of panel 20.00 plus shippingAttachment 341767

Attachment 341768

Attachment 341769

otsenre 03-05-2008 04:09 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by olblue60@aol.com (Post 2608694)
I re read the thread and you quoted me a shipped price. If you think that you need a little more for shipping, let me know. Thanks. whats the story with the doors? Can they ship greyhound? Thanks!

John

If I had quoted a price shipped, thats what it is! Sorry

70GMCer 03-05-2008 04:12 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by 70GMCer (Post 2608767)
Are you selling the exhaust pipes, less mufflers? Is that exhaust for a lwb or swb? Anyway of cutting the pipes in a few manageable pieces and ship them? If so, how much shipped to 21085?

steve

Any word on the shipping for the exhaust?

otsenre 03-05-2008 04:14 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by msgross (Post 2608705)
I might have missed a price on my parts shipped to 17042... thanks..

it was the outer rear floor pieces..

Mike, I think there is enough good panel there for what you need, I did not get a chance to cut out this past weekend, but I will here soon. The 2 pieces you need, how about 20 bucks shipped

otsenre 03-05-2008 04:15 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by 70GMCer (Post 2608767)
Are you selling the exhaust pipes, less mufflers? Is that exhaust for a lwb or swb? Anyway of cutting the pipes in a few manageable pieces and ship them? If so, how much shipped to 21085?

steve

I am using the exhaust on my project, its for a shortbed

otsenre 03-05-2008 04:18 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by bestchevyfan (Post 2609314)
Hey, I Talked To You About Cutting A Part Of The Outside Firewall
In Your Last Post. The Part I Need Is The Rail That Runs Across Under The Windshield It Holds The Wires/wire Harness. It Runs Across The Top Of The Heater Box...you Quoted A Price Of I Think $20.00 Plus Shipping. See Picture Thanks Buddy.

You bet, when do you want it. I will be cutting metal here shortly

otsenre 03-05-2008 04:23 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by TotalChevy1 (Post 2609020)
How much for the door panels, if still for sale, do you have pics of both

Thanks

Door panels look good, arm rests need help, 35.00 plus shippingAttachment 341770

Attachment 341771

otsenre 03-05-2008 04:25 AM

Re: 1972 cab panels and parts
 
Old schooler, I dont want to deal with shipping doors, Thanks

geoman 03-05-2008 06:36 AM

Re: 1972 cab panels and parts
 
Ernest,

I will be picking up a money order for you tomorrow after work for the under the tank panel.

Thanks again!
Mike

otsenre 03-05-2008 07:36 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by geoman (Post 2609816)
Ernest,

I will be picking up a money order for you tomorrow after work for the under the tank panel.

Thanks again!
Mike

Mike, let me get everything cut, then I will post pics to make sure it will work for you. I dont want to be holding your money and then I screw up on the cutting, I will start cutting tommorrow when I get off work.

bomar 03-05-2008 09:01 AM

Re: 1972 cab panels and parts
 
is that passenger side door latch up for sale

geoman 03-05-2008 06:33 PM

Re: 1972 cab panels and parts
 
Sounds good Ernest. I will wait till I hear from you then.

Thanks
Mike

TotalChevy1 03-05-2008 08:09 PM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by otsenre (Post 2609487)
Door panels look good, arm rests need help, 35.00 plus shippingAttachment 341770

Attachment 341771

PM sent, I'll take the door panels

Thanks

bestchevyfan 03-05-2008 08:43 PM

Re: 1972 cab panels and parts
 
Hey, Just Let Me Know How Much And How To Pay You. Thanks, Buddy

FormerMember 03-05-2008 10:42 PM

Re: 1972 cab panels and parts
 
How much for both doors, with mirrors if you still have them? Any rot on either door?

otsenre 03-06-2008 04:15 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by grendel (Post 2610872)
How much for both doors, with mirrors if you still have them? Any rot on either door?

Doors are good, mirrors might be sold pending payment, I dont want to ship doors at this time, Sorry

olblue60@aol.com 03-06-2008 08:24 AM

Re: 1972 cab panels and parts
 
I'm still in on the mirrors. I'm needing your address and type of payment that you prefer.

John

bestchevyfan 03-09-2008 10:54 PM

Re: 1972 cab panels and parts
 
Hey, Let Me Know How To Pay You When You Cut The Part.if It Is Easy To Cut Under The A\c Heater Holes And Then Toward The P,s, I Will Take All Of That Also. Thanks,buddy

otsenre 03-10-2008 03:16 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by otsenre (Post 2604548)
Sorry guys, I meant to delete another thread and this one got in the way, anyhow if we can pick up where we left off... I think visors are sold, pending paymentAttachment 340761

Attachment 340762

Attachment 340763

Attachment 340764

Here are pics of panels, let me know if you guys want them, Attachment 342932

Attachment 342933

Attachment 342934

Attachment 342935

Attachment 342936

otsenre 03-10-2008 03:18 AM

Re: 1972 cab panels and parts
 
Quote:

Originally Posted by otsenre (Post 2617891)
Here are pics of panels, let me know if you guys want them, Attachment 342932

Attachment 342933

Attachment 342934

Attachment 342935

Attachment 342936

moreAttachment 342937

Attachment 342938

geoman 03-10-2008 03:50 AM

Re: 1972 cab panels and parts
 
PM sent back to you Ernest

bestchevyfan 03-11-2008 03:55 PM

Re: 1972 cab panels and parts
 
hey they parts I would like cut are shown in picture.

please send me how much it will cost with shipping.
mailing address is
e.g. wilburn
1401 jordan lane
huntsville al 35816
this is a business address it that matters ...thanks buddy

msgross 03-11-2008 05:15 PM

Re: 1972 cab panels and parts
 
go ahead and ship that entire back floor piece to the other guy that needs it. My pieces can be fabbed easier that messing up that piece for him. Thanks for the pics...


All times are GMT -4. The time now is 01:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com