Re: Watts link info
 

does anybody have a phone # for KP . The tool free number on there site does not work from Canada . Thanks

Re: Watts link info
 

Email or PM Clint. He was real helpful. His member name is Kontrol Phreaks


Clint Petree
KP Components Inc.
866-KP-LINKS
www.kplinks.com

Re: Watts link info
 

Watts link installed and adjusted. Zero side to side movement from full air to aired out. It's a nice piece. Did you order one?

Re: Watts link info
 

How about some pics??

Re: Watts link info
 

I just finished up mine and I held a square up to it from the floor and I have 0 side to side movement. It works great and looks kinda cool too....

Re: Watts link info
 

Contacted , KP .They are moving there facility right now . 30 days or so they should have one .
Clint contacted me , sounds like a great guy with allot of knowledge .
I would like nothing better than to post some pics . 2 issues one is we are in 2 ft of snow since yesterday .
And i need to figure out how to do it .
i hope to take the truck next weekend to Performance Worls , which is Canada 's largest show . If I make it I will take lots of pics and and figure out how to post them .
It's the least I can do , after all the help and support .

Thanks

Re: Watts link info
 

How hard was it too install ? and set up ?

Re: Watts link info
 

installing on my blazer was not as straight forward as I expected because of the rear crossmember in front of my gas tank. I had to modify it for clearance. But, I don't think that trucks would have this problem. It was real easy to set up. I would do it again if I had too.

Re: Watts link info
 

thanks , was it the KP set up ?

Re: Watts link info
 

Yes it was KP. I used the 67-72 2wd chevy truck kit, but I used it on my blazer. I had to use the weld on plates that were included in the kit because my frame in not boxed. The kit is only bolt on if you have a step notch or you box your frame. But, it was still fairly easy to install once I relocated my rear crossmember (this step is not need for a truck- I think).

Re: Watts link info
 

how much is that kit anyway?

Re: Watts link info
 

I was told by Clint it was $399.95 .

Re: Watts link info
 

http://www.kplinks.com/product.php?p...6&cat=5&page=1
I didn't see the 67-72 kit on the website, but it looks just like this one. Same price. Its is not painted or coated.