The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Drop it? (https://67-72chevytrucks.com/vboard/showthread.php?t=298936)

OrangeCrush1970 02-16-2009 10:40 AM

Re: Drop it?
 
There is definatly some Corvette in this truck...

I was under the impression that you cant drop the front more than 2" without drop spindals, we'll find out when we cut the springs. I know I should be able to fit 255's on the front-

67_C-30 02-16-2009 03:07 PM

Re: Drop it?
 
David is the man to see when it comes to Corvette optioned trucks. He sold me a '69 C-10 with the Ultra-Rare Corvette Option (RPO#OU812) hood mounted antenna. You can see pics below!;)

http://67-72chevytrucks.com/vboard/s...d.php?t=293225

texanidiot25 02-16-2009 05:41 PM

Re: Drop it?
 
Quote:

Originally Posted by OrangeCrush1970 (Post 3147725)
There is definatly some Corvette in this truck...

I was under the impression that you cant drop the front more than 2" without drop spindals, we'll find out when we cut the springs. I know I should be able to fit 255's on the front-

I have a 3in spring drop with about 2 inches or so between the bump stop and metal thing that it hits. No time for fancy speak.

I had 265-70s up front when I 1st dropped it and it had tons of clearance. But you'll need a big alignment job afterwards though.

OrangeCrush1970 02-16-2009 08:24 PM

Re: Drop it?
 
1 Attachment(s)
She went under the knife today...4" drop springs in the rear and we cut out somewhere between 3/4 and 1 coil in the front so maybe 2.5". We didnt measure before...IT LOOKS GOOD! We did it right the first time! Sorry for the crappy cell phone pic, I'll take more tomorrow. Orange w/ cousin Pretty Boy in the back-

texanidiot25 02-16-2009 08:32 PM

Re: Drop it?
 
Looks good. Hope it rides OK with cut springs. Gonna be stiff!

72freak 02-16-2009 08:45 PM

Re: Drop it?
 
1 Attachment(s)
Quote:

Originally Posted by texanidiot25 (Post 3148623)
Looks good. Hope it rides OK with cut springs. Gonna be stiff!

Ive cut coils in 10+ trucks ....1/2 ton, 3/4 ton and even 1 ton and I have NEVER noticed a ride difference unless it bottoms out the stock shocks?!?!?

texanidiot25 02-16-2009 08:52 PM

Re: Drop it?
 
Maybe it's how our trucks are sprung, but in theory when you cut a spring you increase it's spring rate. It's a complex explanation as to why though.

Could be that our trucks are sprung so softly that the increased stiffness isn't as noticeable.

OrangeCrush1970 02-16-2009 10:48 PM

Re: Drop it?
 
I havnt noticed a difference in the ride...at all if any. I may have a dead shock on the driver front, but other than that it's TITS. I'll take some better pics in the AM.

67_C-30 02-16-2009 11:05 PM

Re: Drop it?
 
It look great! How far is David's shop from S Cobb Pkwy. My wife and just bought a new car up there.

OrangeCrush1970 02-16-2009 11:12 PM

Re: Drop it?
 
South Cobb turns into Delk Rd which is about a 1/2 mile away...very close. Hit 'em up...we'll drop your wife's new ride a couple of inches!

67_C-30 02-16-2009 11:28 PM

Re: Drop it?
 
Quote:

Originally Posted by OrangeCrush1970 (Post 3149087)
South Cobb turns into Delk Rd which is about a 1/2 mile away...very close. Hit 'em up...we'll drop your wife's new ride a couple of inches!

I can't do that, she'd drop my jaw a few inches!;) I keep saying I'm going to come up and look David's beautiful '72 K10, but I'm afraid I'd have to go in debt! I love that truck!

OrangeCrush1970 02-17-2009 11:21 AM

Re: Drop it?
 
3 Attachment(s)
As promised....
Im a huge tire slut, the more rubber the better in my book. I wasnt sure about the fronts, but i slept on it and I like.

72freak 02-17-2009 01:14 PM

Re: Drop it?
 
No rust


All times are GMT -4. The time now is 01:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com