Re: Torchered
 

Honestly I have not done much Nick the guy bending over in the upper picture has done alot of the latest work.
The donor truck has been chopped and sold or scrapped.
The 69 has been stripped in the engine compartment and dash.
Going to refinish the dash in black with a painted pad and chrome gauge bezels and glove box.
All the little brackets have been sent off to powder coat so soon we can put it back together.
Nick's been stripping the frame past the bed so it can be primed and undercoated. 1/2 frame off restoration.
Looking at paint colors now I like gun metal blue, with matching valve covers and air intake.

Re: Torchered
 

Its been awhile, Originally I was going for a satin black shop truck. Do to lack of funds i have to do more work to get better parts. Like most of us. New updates:
CPP lowerd truck trailing arm cross member installed
CPP trailing arms
New bed sides
LWB bed floor chopped and welded for the new SWB bed floor
Cab has been primed and we are sanding down to spray base
One peice window kit not installed
Test color painted on cab - I call it metal Blue - picture coming soon

I will be buying a ridetech pro level system wednesday

this truck should be based and clearcoated buy end of next week.

The bed has a few issues around the tail gate so it will be painted after I finish the metal work. Pictures will be added this week.

Expensive day!
 

I finally broke down and whipped out the card. Purchased a ridetech prolevel system with height sensors and a second tank. I also called Porterbuilt with 45minutes left on the clock for there droped crossmember sale. I didnt realize it needed a rack system, oh well with a $300 discount it maded a hole lot easier to say yes.

Pictures
 

CPP C-notch installed, bolted and welded

pictures
 

Fabed the upper rear crossmember to hose my shock mounts and new lower shock mounts. I built the lowering blocks for welding practice.

pictures
 

more

Re: Torchered
 

The frame/crossmembers were cleaned with a sanding disk or wire wheel and sprayed with rubber undercoating.

Pictures
 

The air ride parts came in. The E3 controller is much smaller then I thought it would be. I would like to have a program for this thing with an automatic speed height sensor. Say at 55 your truck automatically drops to a preset height.( 1 inch lower for the highway ) I also purchased the extrenal height sensors.

Pictures
 

More

Pin striping
 

The boys and I were thinking of running a colored stripe down the groove in the center of each spoke. This would bring the blue into the wheels

Pictures
 

Cab

Pictures
 

This is the test paint test. It is a metalic blue/metal color. The other picture is the line up of the front valence with the doors and such. I ended up chopping both ends off the valence and rewelding them on to get better gaps.

Pictures
 

Pulled these 10mm muscle bar ends off my Nova to put on the truck. Im swapping in 12mm ends for the Nova considering its weight.

Re: Torchered
 

Sweet ride!!!! how about a couple pics of that nova of yours, pretty please.......

Re: Torchered
 

I thought it wasn't going to be a show truck? Lol.

Re: Torchered
 

LOL, No show. I'm painting it. Its about function. I dont like to peice together or half ass it in parts. It causes headaches later.

Nova
 

You asked so here you go. This will be the only post about this car. I will be starting a build thread for it on another site. So I will include that link later. Thanks for your interrest.

http://www.stevesnovasite.com/forums...d.php?t=148565

400 SBC 470hp on dyno, had a 350 but went bad. It had alot of new parts and I had to decide between a 383 and a 400 to reuse as many as possible. This motor may endup in the truck.
700R4 built, 3,000 stall
Retrotek Paddle shift
Tubular control arms up front with coil overs and 1-1/4 sway bar
aluminum tall spindles with C-6 hubs ( the C-6 has a 3" sealled bearing)
C-6 front and rear brakes (12.8 inch rotor, twin piston front, single out back)
CSR billet vacume pump for power brakes.
12bolt car axle with posi and 3:42 gears
18x8 front and 20x8 rear, will be 19front and 20x10rear by years end.
20 ft paint and interior
Its all function :devil:

Re: Torchered
 

Truck is looking great and that Nova looks good in the pics and sounds like it's a whole lotta fun ;)

Re: Torchered
 

welcome from greenfield,in. nice truck it keep up the good work.

Re: Torchered
 

Thank you, Im hoping to get the fire wall done, and cab painted by end of April so I can start the metal work on the bed. Id really like to have it go to Puyalup Wa for the Good guys show.

Re: Torchered
 

nice build!! you better have that thing ready for goodguys! ill be there with my 68

Re: Torchered
 

Were going to have to reserve spots next to each other! Do they do that?? LOL

Re: Torchered
 

its a free for all!!!

Re: Torchered
 

In that case mine will be at the very end. Its little motor just can't compete.

Re: Torchered
 

Been a little slow, finally had the cab prepped for the final coat of paint and we tore it back down to the frame to install a Porter built crossmember. Still waiting for some parts to get that sucker on but in the mean time built a paint booth. The sides are meant to remain while the fornt and back will roll up so we can move it as needed.