The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Aluminum tail light bezels,Three styles now. (https://67-72chevytrucks.com/vboard/showthread.php?t=316394)

mekdad 12-23-2008 12:54 AM
Re: Aluminum tail light bezels,Three styles now.
 
1 Attachment(s)
I like this plaque I did for a friend.It is 3D and looked nice.

Deuce 12-23-2008 12:56 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by mekdad (Post 3041996)
I like this plaque I did for a friend.It is 3D and looked nice.
Sooo ya think ya can do it then???

Deuce 12-23-2008 12:58 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by mekdad (Post 3041996)
I like this plaque I did for a friend.It is 3D and looked nice.
Could you do a 3-D Glovebox plate??

mekdad 12-23-2008 01:01 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by Deuce (Post 3041998)
Sooo ya think ya can do it then???
I will see if I can put one that is not 3D,just engraved,with the eyes and nose cut out,and post a screen shot maybe tomorrow.

mekdad 12-23-2008 01:05 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by Deuce (Post 3041999)
Could you do a 3-D Glovebox plate??
Ya,but machine time is a killer.You have to remove all the material and leave the image and takes forever,a lot of little steps.

72_cheyenne 12-23-2008 01:09 AM
Re: Aluminum tail light bezels,Three styles now.
 
I'll take a set of
TLB2 with small center bar. . .

mekdad 12-23-2008 01:11 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by 72_cheyenne (Post 3042014)
I'll take a set of
TLB2 with small center bar. . .
PM me your e-mail and I will bill you threw pay pal.

72_cheyenne 12-23-2008 01:18 AM
Re: Aluminum tail light bezels,Three styles now.
 
anthony_casares@hotmail.com

Deuce 12-23-2008 01:18 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by mekdad (Post 3042011)
Ya,but machine time is a killer.You have to remove all the material and leave the image and takes forever,a lot of little steps.
What about removing the skull material??? Then I could drip some paint in the skull..................

mekdad 12-23-2008 01:23 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by Deuce (Post 3042023)
What about removing the skull material??? Then I could drip some paint in the skull..................
That can be done also with not as much machine time but still quite a bit.I will see if I can get a quote put together just to see what it will cost.

Deuce 12-29-2008 09:24 PM
Re: Aluminum tail light bezels,Three styles now.
 
classicchev and myself were playing with the set of bezels he bought from you, and I have to say we come up with something that looked kick-ass !!!!

We also had the idea of side marker light bezels. classicchev can e-mail you the dimensions.

How many sets do we have to buy to get a price break????

MonteSS454 12-30-2008 01:14 AM
Re: Aluminum tail light bezels,Three styles now.
 
Any word on my GMC ones?

MonteSS454 01-09-2009 01:29 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by MonteSS454 (Post 3054537)
Any word on my GMC ones?
??

mekdad 01-09-2009 02:19 PM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by MonteSS454 (Post 3054537)
Any word on my GMC ones?
I have been playing around with different letter styles and sizes,but I cant get them big enough to be machined practically.I can make the center bar wider and engrave the letters in it,but no light would shine threw.Or just go with spades.

mekdad 01-09-2009 05:48 PM
Re: Aluminum tail light bezels,Three styles now.
 
1 Attachment(s)
Quote:
Originally Posted by 1LoC10 (Post 3041349)
those are pretty cool.... plans on making different ones at all? I thing some with a spade would be sweet
Like this?

MonteSS454 01-10-2009 01:55 AM
Re: Aluminum tail light bezels,Three styles now.
 
http://img405.imageshack.us/img405/1315/92329925od3.jpg
http://img405.imageshack.us/img405/9...jpg/1/w374.png

Any chance you can do my trucker ladies?

If not I'll take the spades.

MonteSS454 01-13-2009 03:01 AM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by MonteSS454 (Post 3077207)
??

mekdad 01-13-2009 03:14 PM
Re: Aluminum tail light bezels,Three styles now.
 
1 Attachment(s)
Quote:
Originally Posted by MonteSS454 (Post 3083403)
??
How is this.

Hard On Parts 01-13-2009 06:46 PM
Re: Aluminum tail light bezels,Three styles now.
 
Are you going to do a set with the punisher skull cut out, similar to the iron cross?

mekdad 01-13-2009 06:54 PM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by Hard On Parts (Post 3084473)
Are you going to do a set with the punisher skull cut out, similar to the iron cross?
If I did it would have to be a custom and engrave the skull then cut the eyes and nose all the way threw.

MonteSS454 01-13-2009 07:19 PM
Re: Aluminum tail light bezels,Three styles now.
 
I like it. Go ahead and start on them when you can man.

pcmcobra 01-13-2009 07:47 PM
Re: Aluminum tail light bezels,Three styles now.
 
nice...
any time frame for the 73-87 crowd?
thx

mekdad 01-13-2009 07:53 PM
Re: Aluminum tail light bezels,Three styles now.
 
Quote:
Originally Posted by MonteSS454 (Post 3084531)
I like it. Go ahead and start on them when you can man.
Quote:
Originally Posted by pcmcobra (Post 3084581)
nice...
any time frame for the 73-87 crowd?
thx
Next week,Tuesday or Wednesday.For both of you guys.

Deuce 01-13-2009 11:00 PM
Re: Aluminum tail light bezels,Three styles now.
 
Can you make a FOX license plate??(F foxhead X)??

Deuce 01-13-2009 11:07 PM
Re: Aluminum tail light bezels,Three styles now.
 
Like this with the background removed so it could be painted,and the raised portion could be polished??

http://i15.photobucket.com/albums/a357/Deuce69/Fox.jpg


All times are GMT -4. The time now is 08:55 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com