Re: Looky 72 longhorn Big block with tilt
 

If SPECIAL-K passes on the trans tunnel please put me in line. Any way you could send me a pm to let me know if he passes? Thanks--Josh

Re: Looky 72 longhorn Big block with tilt
 

Randy,

STP said he would take the heat shield and tube for $175 if it can be bead blasted without blowing out. PM shipping info if it is a go and not sold already. His computer is down and I knew he
was looking for one.

Thanks Tommy

Re: Looky 72 longhorn Big block with tilt
 

Randy, If the the BB fan shroud is in excell. cond. with no cracks, I'll take it with the bolts to attach it and how much for shipping?.What kind of shape is the origional jack and how much? Thank you. Dave

Re: Looky 72 longhorn Big block with tilt
 

Is that a full canopy for the Longhorn bed? Is all aluminum?

Re: Looky 72 longhorn Big block with tilt
 

The radio section of the dash looks good?? How much for the middle section?

Thanks

Re: Looky 72 longhorn Big block with tilt
 

Randy put me down for the vent windows if that is $50 for both? If not I am still interested just let me know.

Re: Looky 72 longhorn Big block with tilt
 

How much for complete dash if highrpm passes (no hurry & I will come up to get it) Also how much for front sway bar and brackets. That will fit on a 1/2 ton wont it. Thank you .

Re: Looky 72 longhorn Big block with tilt
 

Sorry guys for not getting back on here, I got home late from the golf tourney. Had Church this morning now I'm going to Easter dinner. I'll reply either later this afternoon or tonight for sure. Sorry for delay, Thansk for your patience, Randy

Re: Looky 72 longhorn Big block with tilt
 

I might be interested in the brake backing plates,brake guts and the drums if you don't mind separating them from the rear end and if shipping isn't stupid expensive since they will be heavy.

Re: Looky 72 longhorn Big block with tilt
 

Ok here we go;) ALL this stuff is plus shipping

Fine69, I'll get a good pic of door, its pretty good $25 shipped

Too Much Stuff, Eric, caps are pretty dinged up $15 for all 4, woodgrain bed pieces are decent, drivers side in front of wheel has woodgrain coming off, driver side rear is good, pass side rear has a few dings, in front of tool box door good, behind too box door is good but has 2 screws put in it to hold it on. $50 for it all. 400 emblems $12 for pair, custom camper $25 for pair

71 super, Harold, let me check the aux fuel switch out. not sure if the camper wiring is on it. As for the windshield and rear window chome, sorry I do not ship those item, they are hard to box and get damaged easily

Castiron9, Rene, 70 cst wants it all if good, I'd like to sell it all together without splitting it up

My72BB, Alan, camper mirrors, the driver side is missing mirror and "L" shaped arm. $25 for all I have. Door panels are sold to Dieselwrencher, sorry. Emblems, $25 for pair of custom camper (your 2nd on these), $10 for pair of 400 (2nd on these). Outer grill sorry I don't ship those. ALT brackets $90. If you decide you want any of this stuff, we can box it all up with the stuff your buying off the blazer to save you shipping?

Classic Bowties, Mel, it all original stuff. Pullies $60, fan $30, PS brackets $100 with reservoir $125

Southern Parts, Woody, your 3rd in line on them. 70cst, Castiron9 then you

Dmarcum123, tilt is tight, the shifter arm has some surface rust on the chrome. Its missing the little white plastic indicator (which most are) $250 plus shipping

Thanks Randy

Re: Looky 72 longhorn Big block with tilt
 

Next ones

Neo1370, Vernon, If Classic Bowties passes on reservoir $25 plus shipping for it

David Wiebelt, $15 shipped for cighter lighter, female part and wiring. Your 2nd on the aux fuel switch (I have to look at it yet to price)

Down South Truckn, Mike, I priced it all to too Much Stuff for $50, if he passes I'll sell individual pieces for $12 each. the one behind the tool box is good but has screws in it, the one in front is good

Stope4, I think the radiator is sold locally, sorry. Not sure what hose clamp your wanting I don't see one

Special-k, Tim, its yours, and I have some chrome pieces your needing if this truck doesn't them.

1972 CheyenneSuper, Josh, I'll let you know what he does. I may have another Big Block truck bought and it has one in it

Thanks Randy

Re: Looky 72 longhorn Big block with tilt
 

Randy what type of drive shaft does it have?

Re: Looky 72 longhorn Big block with tilt
 

55454, Tommy, he will be third in line on it.

Daves 72 GMC, its missing one of the upper bolts that goes into the 4 core holders. It looks good from what I can see but once I get it off I'll get better pics for you. I don't think the jack and stuff is in it, if I find it your first in line on it

stllookn, its a full aluminum canopy

Highrpm, its in good shape for just the area where radio, ash tray and where the AC control goes $25 plus shipping. If you decide you want this we can get a bigger box and box witht he other stuff your buying off the blazer?

71 super, Harold, yes $50 for pair plus shipping. They are not in bad shape, some light pitting on pass side, and the drivers side has one seal issue, I can get pics of them.

truckpoorpackrat, Your 2nd on it. Are you needing from dash pad down $50 or the whole vent area below windshield $80. Yes sway bar and brackets will fit right on 1/2 $40 for it

Zeusflash, sorry I don't separate rearend stuff I sell them complete.

Drew67, Andew, I have not looked at that, I'll go out there in a bit and see

Thanks guys, AS I SAID IT WILL NOT BE THIS WEEK BUT NEXT BEFORE I GET TO PARTING THIS, PLEASE LET ME KNOW IF YOU WANT THE PARTS YOU ASKED ABOUT. THANKS for YOUR time and PATIENCE

Thanks guys, Randy

Re: Looky 72 longhorn Big block with tilt
 

Sounds good, when you get it ready just give me a new total$

Where are they typically cut out, under the glove box and instrument panel??

Re: Looky 72 longhorn Big block with tilt
 

yes both those 2 places and under dash pad. Thanks Randy

Re: Looky 72 longhorn Big block with tilt
 

Pm me on your address and I'll send a money order out. let me know if super 71 doesn't want the aux fuel switch.

Re: Looky 72 longhorn Big block with tilt
 

I would be interested in the dash with the ac vents. I could pick it up next weekend. Let me know if it gets to me.

Re: Looky 72 longhorn Big block with tilt
 

Drew67, Andrew, its a 2 piece driveshaft
71 Super, Harold, $40 plus shipping for the fuel switch
David, Wiebelt, Pm'd you, and I'll let you know what he decides
m6z, sorry the center portion of AC dash has been sold. Still have the vents for sale
Thanks Randy

Re: Looky 72 longhorn Big block with tilt
 

Randy, can you put me in line for the fan shroud. pending condition when you get it off.

Thanks, Bill

Re: Looky 72 longhorn Big block with tilt
 

Thedoor windows appear to be tinted and I wonder if they are not scratched. I am looking for some with no scratches...Any help? Thanks!

Re: Looky 72 longhorn Big block with tilt
 

Sure will Bill, your 2nd in line on it behind Dave 72 GMC. Thanks Randy

Re: Looky 72 longhorn Big block with tilt
 

Don, Sorry they have light scratches in them. I've been looking for you a set but they are hard to find without any scratches. Thanks Randy

Re: Looky 72 longhorn Big block with tilt
 

Pics for Fine69, No dents and no deep scratches some light ones, that all should wax out

Re: Looky 72 longhorn Big block with tilt
 

PM on the GB door Randy. And PayPal sent.

Thanks

Re: Looky 72 longhorn Big block with tilt
 

OK UPDATED LIST ON WHAT IS SOLD FOR SURE pending condition once I get everything off

cig lighter assembly-David Wiebelt (David)
400 emblems-Too Much Stuff (Eric)
2 chrome pieces by tool box door-TOO much stuff (Eric)
shroud-Daves 72 GMC (Dave)
ALT brackets-My72BB (Alan)
mirrors-My72BB (Alan)
heat shield and tube-70cst (Dewayne)
motor-Woodsy
AC brackets-Pat
high hump-Special-K (Tim)
AC center section of dash-highrpm (Reggie)
glove box door-Fine69 (Mike)
Aux Fuel setup-71 super (Harold)
Wing windows- 71 super (Harold)
Motor pullies-Classic Bowties (Mel)
Fan- Classic Bowties (Mel)
Tilt- Dmarcum123
kickdown setup, under dash wiring and engine wiring- 68350 (Doug)

Waiting to hear on
Power steering brackets and reservoir- Classic Bowties (Mel)

Still have for sale ALOT of stuff on here (Prices on 1st page)
Turbo 400 Linkage
inner and outer grill
bed
most of chrome
gauge set up
AC control
motor mounts and stands
exhaust manifolds
air cleaner
Aux battery tray
brake booster setup
seat
AT crossmember
brake pedal setup
visors
AND MORE
Thanks Rndy