Originally Posted by RPOZ11 (Post 3340761)

HEI was not available on these models until later years, maybe 75.
Any wiring for an electronic choke would either have to be manually fabricated, or...
Have a reproduction/refurbished system wired to accomplish that!
I usually select a switched 12 Volt supply that is fused to the electronic choke when used.
When using an HEI in these, take particular NOTICE to the wire that you are using to supply that 12-Volt source.
Using a lesser amperage wire may cause either hazardous electrical fires and/or ignition failure.
The electrical demand to operate an HEI is significantly higher than a points system!

Originally Posted by paul mora (Post 3341103)

I live in in Orange county so I can pick up or you can deliver what condition are they in and how much for the all or part . Yo can give me a call at 714 3238376

Originally Posted by gcburdic (Post 3341286)

Thanks for your explaination....I guess I realized that I didn't ask the right question....do you have any wiring harnesses available??...I think he plans on rewiring them to be HEI.....does that make sense?...Thanks

Originally Posted by D.PASSMORE (Post 3341220)

Do you have both camper mirrors? Intrested.

Originally Posted by paul mora (Post 3344486)

I am not clear if you have the door panels and the condition of the seat. How do we set up a time to see the parts you can call me at 714 323 8376

Originally Posted by olblue60@aol.com (Post 3347040)

Do you have any of the windshield stainless? Thanks

John

Originally Posted by cxune (Post 3348100)

I didn't spot this in your photos, but in all that stuff do you happen to have an alternator pulley? If so, how much shipped to 77007?

Thanks!
Patrick

Originally Posted by mrhino (Post 3347039)

im looking for some upper trim molding what do you have?

Originally Posted by Dano69c10 (Post 3353917)

Will you sell the rolling frame? If you are how much?