The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   Fab 9 (https://67-72chevytrucks.com/vboard/showthread.php?t=365819)

fryco 10-30-2009 08:14 PM
Re: Fab 9
 
I'm sure someone already asked this: Do you do anything with the trailing arms? Plate them or weld them down the seams?

My small block makes just over 650hp, no spray, blower or turbo. I have a turbo 350 trans w/brake and a 4200 rpm converter. Is there any danger in running these arms stock? Are there weak points I'm not aware of??? Any help would be appreciated, thanks

djracer 10-31-2009 12:18 PM
Re: Fab 9
 
Quote:
Originally Posted by fryco (Post 3594781)
I'm sure someone already asked this: Do you do anything with the trailing arms? Plate them or weld them down the seams?

My small block makes just over 650hp, no spray, blower or turbo. I have a turbo 350 trans w/brake and a 4200 rpm converter. Is there any danger in running these arms stock? Are there weak points I'm not aware of??? Any help would be appreciated, thanks

Mine have a small plate on the top and bottom and the seams are welded. My old combo made 900hp plus with nitrous. Tom Duraham that had the truck before me had more power. I am adding 80 cubic inches and more spray when I get it back together.

fryco 11-01-2009 03:21 AM
Re: Fab 9
 
djracer

Do you have a picture of whats been done to your trailing arms????

djracer 11-01-2009 04:26 PM
Re: Fab 9
 
I don't have any pics. but its just a small plate about 1x6 welded on top of the trailing arms at the front and the top and bottom seams welded the full length of the arms.

AirMale 01-02-2010 07:59 PM
Re: Fab 9
 
1 Attachment(s)
took me a while, but I finally got the anti-roll bar/mount figured out. Started to paint her 2nite.

KQQL IT 01-02-2010 09:47 PM
Re: Fab 9
 
Quote:
Originally Posted by AirMale (Post 3706454)
took me a while, but I finally got the anti-roll bar/mount figured out. Started to paint her 2nite.
Auto Porn!!!!

jgh64pkup 01-03-2010 12:18 AM
Re: Fab 9
 
wow i just want a regular 9 inch i dont need a fab 9
but dayum that looks badass

bigboybodry 01-07-2010 04:22 PM
Re: Fab 9
 
Next on the wish list fo sho. That is sweet


All times are GMT -4. The time now is 08:37 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com