The 1947 - Present Chevrolet & GMC Truck Message Board Network - TX 72 swb chassis and chevrolet 6.0 4l80e

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - TX 72 swb chassis and chevrolet 6.0 4l80e (https://67-72chevytrucks.com/vboard/showthread.php?t=386642)

Re: 72 swb chassis and chevrolet 6.0 4l80e

Quote:

Originally Posted by Thealien (Post 3811829)

Whats the ballpark cost of a crate motor like that?

usually a bunch..but I got a smokin deal....my wife paid for part of it! :lol:
I'll post a link if the seller lists some more motors. here's another ebay seller that has some...cheaper then from a dealer. I got mine for a bit less, but $3770 for a 6.0L, $2770 for a 5.3, and $2588 for a 4.8L. He has two of each listed, plus some Nortstar's and a 3.4 DOHC.

http://stores.ebay.com/ECarOnline_EN...34Q2ec0Q2em322

Re: 72 swb chassis and chevrolet 6.0 4l80e

everything is still for sale.

Re: 72 swb chassis and chevrolet 6.0 4l80e

Fuel cell and front clip sold.

Chasis, motor, tranny = 2100

Rust free cab with title = 500

Great Condition doors with the glass, hinges, and vents = 400

Strait rust free fleetside bed = 800

68 Grille = 100

3/4 ton brake booster = 75

You can call me anytime at 903-390-0243 with questions

Re: 72 swb chassis and chevrolet 6.0 4l80e

Get in here and check out these deals guys, especially some of you that don't need the whole thing... as he's parting it now!

Re: 72 swb chassis and chevrolet 6.0 4l80e

Interested in the bed. PM sent

Re: 72 swb chassis and chevrolet 6.0 4l80e

Called and talked to you about the doors. Let me know if your buyer doesn't buy it all. Thanks

Re: 72 swb chassis and chevrolet 6.0 4l80e

Nice talking to you earlier about the bed. I will call you tmrw.

Re: 72 swb chassis and chevrolet 6.0 4l80e

Im very interested in the doors!

Re: 72 swb chassis and chevrolet 6.0 4l80e

how much for the chassis without the motor and trans??

Re: 72 swb chassis and chevrolet 6.0 4l80e

1000 For the chasis by itself.

Re: 72 swb chassis and chevrolet 6.0 4l80e

bed and cab sold.

Still have the doors and the chasis and motor and tranny

Re: 72 swb chassis and chevrolet 6.0 4l80e

Will split the chasis and drive train.

Chasis = 1000

6.0 vortec and 4l80e tranny = 1500

ece vortec mounts = 200

Re: 72 swb chassis and chevrolet 6.0 4l80e

does the motor include the computer?

Re: 72 swb chassis and chevrolet 6.0 4l80e

yes it has computer, fusebox, and the cruise control.

Re: 72 swb chassis and chevrolet 6.0 4l80e

ttt will split the chasis nd motor

Re: 72 swb chassis and chevrolet 6.0 4l80e

A couple questions on the chassis. Stock spindles? Have any of the wear parts been replaced? balljoints, bushings, tie rods, etc. New rotors and pads?

Re: 72 swb chassis and chevrolet 6.0 4l80e

The po said that he had rebuilt the front end when he had the truck. It was his daily driver and when his motor went out he just decide to part out the truck so I ended up with the frame. So as far as I know it has had some attention in recent years. And the spindles are stock.

Re: 72 swb chassis and chevrolet 6.0 4l80e

Anyone interested in just the chasis at 750?

Re: 72 swb chassis and chevrolet 6.0 4l80e

Quote:

Originally Posted by hensonjd (Post 3821917)

Anyone interested in just the chasis at 750?

What's your zip code?

Re: 72 swb chassis and chevrolet 6.0 4l80e

How about $1800 for motor, tranny, and chassis?

Re: 72 swb chassis and chevrolet 6.0 4l80e