Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

I am swapping my '86 over to a rack and pinion. Can you get me a price on a 1"DD by 3/4DD joint and 3/4-36 spline by 3/4DD with say 22" of DD shaft. Not sure how long of a shaft I need but 22" should do it.

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

No sweat $45.00 a joint and the shaft is $30.00 but its all nickle plated and it would be 36 inches. We only sell shaft in 18" and 36" inch. Thanks let me know.

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

Awesome! I will give you a call to oder..

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

wow, that has me thinking now... good price too..

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

No sweat, let me know if you need one. Thanks

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

Does this offer still stand for 2 billet u joints and shaft? I need a set but need to measure for spline sizes not sure what box or column in my truck. P.O. did a camero swap and has a tilt column out of a mystry car/truck

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

Yes this offer is still good. Thanks

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

not to change the subject jeff but what do you all have to convert my truck from manual to 4 wheel disc brakes, just the master cylinder, prop valve, booster, brackets and hardware? willwood d52 calipers as well if you can work me up some kind of deal? sorry guys for highjacking the tread just need some info directly from a source, by the way the truck is a '71 w/ disc front drum rear as of right now

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

I have some killer deals on 4 wheel disc brake kits, we can put something together. Keep in mind i dont have a matching rear wilwood caliper for that front, i do have the Wilwood Master cylinders also we can put in the package. Call me at 888-522-8303 ext 118 for a price and we can talk details.

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

I have a 68 C10 and will be lifting the body just one inch. Does the shaft you make already have the ability to extend a little, like 1/2" or so? Or would you have to custom build one that is slightly longer? I would think that the guys adding a 3 inch body lift could really use a longer shaft.

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

Still making these? I bought a '72 tilt from a "truck". Found out that it is the longer shaft from a van..Grrr.

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

Hey jeff do you think you can make one for an 86? Without the ragjoint? My ragjoint puts too much slop that i feel in my unhooked power steering box.
Posted via Mobile Device

Re: Hey i just got shafted! Take a look the sight of being shafted never looked so go
 

CPP is no longer a Forum Vendor. I suggest you contact one of our Forum Vendors that is a CPP dealer for your needs