The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Serpentine conversion (https://67-72chevytrucks.com/vboard/showthread.php?t=397972)

gchemist

05-10-2010 07:37 PM

Re: Serpentine conversion

Quote:

Originally Posted by toms84ss (Post 3968307)

You can use the stock balancer with the serpentine pulley.

Yes, all you need is a V-8 crank serpentine pulley.

joe231

05-10-2010 07:58 PM

Re: Serpentine conversion

Quote:

Originally Posted by gchemist (Post 3968847)

Yes. The alternator and A/C compressor stay on the same side as stock. If you use the 93-95 brackets, the compressor and alternator are reversed.

I think the truck brackets are pretty much the same from late '87-95, there are some steel brackets in there somewhere, but I'm not sure where.

lifted87

05-10-2010 09:07 PM

Re: Serpentine conversion

i bought the gm performance [arts serp. kit from jegs and it has everything you need bolts and all. it includes all new alt.,waterpump,p/s pump, a/c unit and pulleys. it is a really easy and nice kit to install.all the bolts and brackets are labeled.

All times are GMT -4. The time now is 01:49 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page