The 1947 - Present Chevrolet & GMC Truck Message Board Network - KS 73+ DJM 3" Drop spindles for 1.25" rotor

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - KS 73+ DJM 3" Drop spindles for 1.25" rotor (https://67-72chevytrucks.com/vboard/showthread.php?t=406574)

m6z	07-30-2010 12:11 PM

Re: 73+ DJM 3" Drop spindles for 1.25" rotor

Quote:

Originally Posted by hayesperformanceplus (Post 4114575)

Would they work on a 3/4 ton?

No, unless you were changing to 1/2 ton disc brakes. Then I think you can just change the ball joints to the 1/2 ton ones. They are not going to work with the 8 lug stuff.

hayesperformanceplus

07-30-2010 12:17 PM

Re: 73+ DJM 3" Drop spindles for 1.25" rotor

Which companies made the spindles for the 3/4 tons and 1 tons?

m6z	07-30-2010 12:30 PM

Re: 73+ DJM 3" Drop spindles for 1.25" rotor

Quote:

Originally Posted by hayesperformanceplus (Post 4114651)

Which companies made the spindles for the 3/4 tons and 1 tons?

No idea. Might check the suspension section.

All times are GMT -4. The time now is 02:00 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page