The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 17 1 2 3456712 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   Bolt in steering rack (https://67-72chevytrucks.com/vboard/showthread.php?t=441047)

Tmend 01-18-2011 04:33 PM
Re: Bolt in steering rack
 
you got a ballpak price yet

rob32472 01-18-2011 08:26 PM
Re: Bolt in steering rack
 
Quote:
Originally Posted by robnolimit (Post 4421143)
As luck would have it, we are currently testing a C-10 Rack&Pinion set-up. (67-87) I'll let you know when were done. So far it fits very nice. 2.75 turns lock-to-lock. Full steering to 40 deg (same as stock). .136 deg bump-out in 4" of compression travel, and .166 deg bump-out in 4" of droop. This mod will require some cutting and welding on the crossmember. We are working on the install templates, and machined adjusters for the TRE. --- SOON, VERY SOON.
I am very interested in this upgrade keep me posted!!!!

Tmend 01-18-2011 11:33 PM
Re: Bolt in steering rack
 
Same here please keep me posted.
Posted via Mobile Device

robnolimit 01-19-2011 02:02 PM
Re: Bolt in steering rack
 
Quote:
Originally Posted by Tmend (Post 4421181)
you got a ballpak price yet
HAHA, not yey, but I have to guess it'll be less than $3000.00 - a lot less.:metal: I'm going to test one on out JT 72, in a couple of weeks. Then I'll get some picts up. Sorry, but I can't let to much out yet, as a lot of our competion uses us for R & D (Rip-off and Duplicate)

Tmend 01-19-2011 02:48 PM
Re: Bolt in steering rack
 
rip off and duplicate thats funny sh*&t never heard that one befor. but understood just keep us posted im very intredted thanks.

tech@scottshotrods 01-19-2011 03:13 PM
Re: Bolt in steering rack
 
Quote:
Originally Posted by robnolimit (Post 4423337)
HAHA, not yey, but I have to guess it'll be less than $3000.00 - a lot less.:metal: I'm going to test one on out JT 72, in a couple of weeks. Then I'll get some picts up. Sorry, but I can't let to much out yet, as a lot of our competion uses us for R & D (Rip-off and Duplicate)
I don't see any of us vendors on here doing that.... Nate does his thing, we do ours, i dont see cpp doing that soooo post away rob

chapster 01-22-2011 12:08 PM
Re: Bolt in steering rack
 
Very interesting,

If it is possible to manufacture this kit to be affordable and still make a profit, I think it would sell like crazy!!

rob32472 01-22-2011 01:42 PM
Re: Bolt in steering rack
 
Agreed!:smoke:

michaelnolimit 01-22-2011 04:34 PM
Re: Bolt in steering rack
 
OK guys, it's looking good so far. This kit will include a P/S rack, mounting kit, machined tie rod adjusters, Lower steering U-joint, Drivers side motor mount, lower steering shaft, and probably two cutom fitting for the rack. Now, what do you think is a fair price point. Looks like the kit would be in the 775 range. Not to far off of a complete rebuild of the factory P/S, and our rack kit cuts bumsteer to .192 deg. in 3" travel either side of RH. Well?

SCOTI 01-22-2011 05:18 PM
Re: Bolt in steering rack
 
Quote:
Originally Posted by michaelnolimit (Post 4430302)
OK guys, it's looking good so far. This kit will include a P/S rack, mounting kit, machined tie rod adjusters, Lower steering U-joint, Drivers side motor mount, lower steering shaft, and probably two cutom fitting for the rack. Now, what do you think is a fair price point. Looks like the kit would be in the 775 range. Not to far off of a complete rebuild of the factory P/S, and our rack kit cuts bumsteer to .192 deg. in 3" travel either side of RH. Well?
Standard app R&P or custom? Not bad pricing either way really.... just better in the 'big picture' if it's not a custom R&P.

Tmend 01-22-2011 05:44 PM
Re: Bolt in steering rack
 
Let's see so for $775 ill do away with all the steering components tha tke that nice look away and that huge steering box that leaks and look ugly get to keep my stock crossmember that already was disc brakes and keep my bag set up.BUT get the modern feel of a rack and pinion? Well sir you can count me in....
Posted via Mobile Device

rob32472 01-22-2011 10:07 PM
Re: Bolt in steering rack
 
Here is a snag for ya what about us ls motor transplant guys I am using ece mounts....... 775.00 is a good price point for the rack..... I am in if I can get the motor mount situation solved!

chapster 01-23-2011 07:46 PM
Re: Bolt in steering rack
 
I am curious on the accommodation of the lsx swaps with different styles of engine perches myself?

rob32472 02-03-2011 05:25 PM
Re: Bolt in steering rack
 
Any updates?

tubbedII 02-03-2011 07:21 PM
Re: Bolt in steering rack
 
Will the kit work with a sectioned crossmember?

I can't see myself spending the 775 for a R&P any time soon, but if it works with a a sectioned crossmember, it sounds like a cheaper way to have good steering and be able to lay frame.

robnolimit 02-03-2011 09:15 PM
Re: Bolt in steering rack
 
still working on it. As a plus, the guys at Painless are building a C-10 for the Power tour, and they made me promise to have one for them. So, now I have a deadline, to help spur me along.

chermik1999 02-10-2011 11:28 PM
Re: Bolt in steering rack
 
Hey Rob,

No disrespect to Nate as he's helped me out a bit and a super fellow by email, but I have CPP upper and lower tube arms, bags etc already. I'm trying to save a bit on an expensive build that has just started(or my wife will shooooot me!). Would your new drop member be compatible with other control arms?

robnolimit 02-10-2011 11:37 PM
Re: Bolt in steering rack
 
We're not planning on competing with Porter's Dropmember. What we have in the works is a Power Rack and Pinion upgrade to the stock crossmember. As it will be a tunabe install, it should work fine with ANY aftermarket set of arms. - regardless of any wheel placement or caster changes from the arms. - - - Buy your wife a nice Valentines gift. Happy Wife = Happy Life.

chermik1999 02-10-2011 11:51 PM
Re: Bolt in steering rack
 
I here ya....you both sound like you have great integrity.....good stuff. I own a business here as well and do the same. U 2 are awesome...keep it up....you'll go along way...you too Rob.

OK...so either a change all or try the R/P with my existing K-member.

Super.....I'll watch and decide. And I will.....but she still loves me????......I hope...LOL

thanks

Mike J 02-11-2011 04:08 PM
Re: Bolt in steering rack
 
ok, I have 2 questions about this set-up. Should be fine with a 6-cyl application right? and manual rack should work just fine as well, right? Thanks! $775 seems fair

robnolimit 02-11-2011 04:34 PM
Re: Bolt in steering rack
 
Hmm, never thought of that one. 6 cyl. is no problem, but we will not be offering a manual rack option - sorry. If we did, I don't think you would be happy with us, and it would end up a loose-loose. We try to avoid that as much as we can. It would be easy enough to put a p/s pump on the 6 cyl :)

dwcsr 02-11-2011 04:45 PM
Re: Bolt in steering rack
 
If anyones interested I did a power rack on a C10 about 8 years ago.
heres a link to it. It cost about $300 to do. You will need some good fab skills.

http://www.thehollisterroadcompany.com/rackpinion.html

Tmend 02-11-2011 09:57 PM
Re: Bolt in steering rack
 
That link looks like lots of work and the outcome doesn't look that great. To many ifs. Im gonna wait it out till robs done then make a choice from there..thanks for the link tho.
Posted via Mobile Device

dwcsr 02-12-2011 10:33 AM
Re: Bolt in steering rack
 
Quote:
Originally Posted by Tmend (Post 4479462)
That link looks like lots of work and the outcome doesn't look that great. To many ifs. Im gonna wait it out till robs done then make a choice from there..thanks for the link tho.
Posted via Mobile Device
Its does have some ugly on it, But it was a first attempt and has been refined greatly since then. The out come was to have a truck suspension under a truck that was driven daily and not have to turn the wheel 5 turns from lock to lock. As far as looks unless I planned on having the guys over to stare at my rack for the afternoon and not the gril next stores rack then I would have done a C5 or something ;)

lolife99 02-12-2011 12:24 PM
Re: Bolt in steering rack
 
Quote:
Originally Posted by robnolimit (Post 4478831)
Hmm, never thought of that one. 6 cyl. is no problem, but we will not be offering a manual rack option - sorry. If we did, I don't think you would be happy with us, and it would end up a loose-loose. We try to avoid that as much as we can. It would be easy enough to put a p/s pump on the 6 cyl :)
I'm not so sure about that.
250 and 292 P/S brackets and pulleys are getting harder and harder to come by.


All times are GMT -4. The time now is 02:00 PM.
Page 2 of 17 1 2 3456712 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com