Re: Dynatech MuscleMaxx Headers
 

there different, there are different headers that fit but they are shorties or there twice as much as these or more and there only mid lengths
http://i1233.photobucket.com/albums/...w678/004-1.jpg
http://i1233.photobucket.com/albums/...now678/006.jpg

Re: Dynatech MuscleMaxx Headers
 

Help me out with a measurement if you would. I'd love to know the height from the very top of the upper primary to the lowest point. Thanks

Re: Dynatech MuscleMaxx Headers
 

so flaming, they work on a square? or?

Re: Dynatech MuscleMaxx Headers
 

Are you going to be able to use the stock wire for cylinder #5

Re: Dynatech MuscleMaxx Headers
 

those aren't my pics there from a different site and not for sure if they really fit

Re: Dynatech MuscleMaxx Headers
 

I went a head and got some hooker super comp 64-72 chevelle headers
http://i147.photobucket.com/albums/r...0/100_2982.jpg
http://i147.photobucket.com/albums/r...0/100_2983.jpg
http://i147.photobucket.com/albums/r...0/100_2984.jpg

Re: Dynatech MuscleMaxx Headers
 

Looks like a good fit. Did you have to do any thing to make them fit? What mount plates you using?

Re: Dynatech MuscleMaxx Headers
 

I'm using the dirty dingo mounts around the stock position, I haven't had to do any trimming yet but I will a little on the the trans mission ears that stick out, On the passenger side the tube are real close to starter so I will use some type of heat there or and mini starter

Re: Dynatech MuscleMaxx Headers
 

That is the same plates i have! Look way better then the f body set i tryed. Thanks

Re: Dynatech MuscleMaxx Headers
 

Wow. They look great. I just got an email from Speedway Motors saying they cancelled my order for the Dynatech 70-81 Camaro swap headers. They don't make them anymore and Speedway recently sold their last pair. I'll be looking at the Hookers for sure. They've got to be more expensive than the Dynamax. Where did you get them, flamingbig10?

Re: Dynatech MuscleMaxx Headers
 

Wow, the Hookers are $300 more than the Dynatechs.

Re: Dynatech MuscleMaxx Headers
 

wow.....Dynatech dropped them? I just recieved one of their new 2011 catalogs and they listed them in it.

Dynatech also offers LSx swap headers for the '67-'69 Camaro's and the early (pre-'75) Nova's...and I think even the pre '73 Chevelle's, but I don't have the catalog handy.

Re: Dynatech MuscleMaxx Headers
 

I haven't seen anyone use the other Dynatech's for swap in trucks. I'd love to know how they fit.
Jegs has the 70-81 Camaro swap headers with the 1 3/4 to 1 7/8 step primaries in stock for $400. I might just pull the trigger on those. The Hookers look great but I can't afford to drop $700 on them right now.

Re: Dynatech MuscleMaxx Headers
 

thanks, yes these headers were a little pricey but I need to get this truck so I got these

Re: Dynatech MuscleMaxx Headers
 

Just bought the 70-81 Camaro 1 3/4 to 1 7/8 step to 3" from Jegs.

Re: Dynatech MuscleMaxx Headers
 

whats the part number of the ones you're talking about?

Re: Dynatech MuscleMaxx Headers
 

329-740-29310 is what it says on the invoice. I'll post pics when they get here. They're supposed to arrive on Friday.

Re: Dynatech MuscleMaxx Headers
 

That part number says they are for a small block chevy

Re: Dynatech MuscleMaxx Headers
 

You're right. I just called FedEx and had them turn the shipment around to Jegs. softballnrd27, I owe you a beer. You probably just saved me 40-50 bucks in shipping that I would have had to pay if they had gotten all the way to my house. Thank You!

Re: Dynatech MuscleMaxx Headers
 

Not a problem, I was going to get the steps too but when I looked at the part number it was SBC not LS. I have only been able to fnd the 67-69 part number but I don't know if they will fit or not. Good thing is that I have 6 months to wait.

Re: Dynatech MuscleMaxx Headers
 

several stepped ones are available for a sbc. Dynatech's available LSx headers are not stepped, and not painted...they come coated only, and for $399. Dynatech's SuperMaxx series for new/newish factory LSx powered cars is also available but they start at like $859!

Part#'s from the Dynatech 2001 catalog for '70-'81 Camaro are:
1 7/8" x 3" LSx coated header- #715-29410 w/3" reducers
1 7/8" x 3" LSx coated header - #715-19410 w/2.5" reducers

Part#'s from the Dynatech 2001 catalog for '67-'69 Camaro are:
1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers
1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers

Part#'s from the Dynatech 2001 catalog for '68-'74 Nova (same as 1st gen Camaro?)are:
1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers
1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers

Re: Dynatech MuscleMaxx Headers
 

The problem is that Speedway Motors is out of the 70-81 Camaro swap headers and the only other place I can find them is Jegs for $719. Do you know of anywhere else that has them for $399?

Re: Dynatech MuscleMaxx Headers
 

Summit sells them for $399 and lists a 4/13 ship date if bought today.
http://www.summitracing.com/dynatech

Re: Dynatech MuscleMaxx Headers
 

Any idea of the length of the black line? Thanks :metal:

Re: Dynatech MuscleMaxx Headers
 

Do you have your body on yet? Was wondering if they cleared the shifter linkage.