Re: My BBC couple pictures.
 

I also have a M77 pump for my 496. The spring that you installed, is that the optional one that comes with the pump? I know SBC's better than the BBC's. I remembered that you don't want a HV oil pump in them either.

Re: My BBC couple pictures.
 

Yes that's the one I installed. That's the other the extra spring that comes with the M77 pump it's the high pressure spring.

Re: My BBC couple pictures.
 

What kind of pressure do you normally get out of it?

Re: My BBC couple pictures.
 

Thats funny I always use the M77 pump and only had the extra spring come with the small block pump not the Big block pump, the spring doesn't change volume though only adds some pressure which is alright on the BB. My BB idles at about 18psi operating temp with the M77 stock spring.

Re: My BBC couple pictures.
 

I figure between 25-30 psi at idle an 65-80 on the other end with the HP spring. Of course it also depends on clearances.

Was going to work on it this evening but worked over some an just did not have it in me when I got home.

Re: My BBC couple pictures.
 

Did everyone see that nice looking timing cover? Well, it is coming off this coming week it will not match up with the Milidon oil pan. Then it is going back where it came from. Have a Milidon cover on the way. Should be here Tuesday or Wednesday this coming week.

By the way it is not a name brand cover. Told him I would try it.

Re: My BBC couple pictures.
 

Well got the new cover in an it fits perfect. But, going to have to buy a another cam button. I have bought my last off brand timing cover. No pictures, but should have some middle of week or this coming weekend. I went to the round track racing last night for the first time in 15 years an it kind of got me stirred a little.

Re: My BBC couple pictures.
 

Well, could not find a cam button close to home. So, going to make a trip to the Speed Shop saturday an pick up one. He did not have any either. He said he would have some by this weekend.

Re: My BBC couple pictures.
 

Well my camshaft end play is set. Put the timing cover on.

Re: Picture update
 

http://i168.photobucket.com/albums/u...t/DSC_0203.jpg


http://i168.photobucket.com/albums/u...t/DSC_0206.jpg

Re: My BBC couple pictures.
 

I get to start on the top side this weekend.

Re: My BBC couple pictures.
 

Man....should have went with the Cloyes quick button timing chain cover. Those things rule! I had my roller endplay set and final in about 7 minutes.

Re: My BBC couple pictures.
 

You are not going to believe this but was thinking about what you did the whole time. Just did not want to spring for that money. But it is done now. Never got time to work on it today. May work on it tomorrow after easter stuff is finished.

Re: My BBC couple pictures.
 

As long as it's done and done right, stock chrome looks just fine!

Re: My BBC couple pictures.
 

That is the Milidon cover to match that pan. It seems a lot thicker an more heavy duty than the stock cover that I recall an it has the wear plate. It was actually close. Did not need a lot of work.

Re: My BBC couple pictures.
 

Hey Blue Rat, where at in Arkansas are you?

Re: My BBC couple pictures.
 

I still got your number call you when things slow down a little.

Re: My BBC couple pictures.
 

Whenever you're ready! I'm on my days off from work right now and I'm bored out of my mind!

Re: My BBC couple pictures.
 

I checked my rocker arm geometry yesterday afternoon. I went back an checked it again this evening. I had a light bulb come on in my head. If you take a white LED light for that matter most likely any light. Shine toward you from the backside of the rocker arm. Then put a sheet of copy white paper between the light an the rocker arm. You can see where the roller on the rocker is making contact on top of the valve as clear as day.

Re: My BBC couple pictures.
 

My Smith brothers pushrods came in yesterday.

Re: My BBC couple pictures.
 

It won't be long and you'll have that baby fired up!

Re: My BBC couple pictures.
 

Well work an the temps being high have kept me busy. I did manage to get all the head studs in today. Heads next!

Re: My BBC couple pictures.
 

I put the heads on it this morning.

http://i168.photobucket.com/albums/u...t/DSC_0208.jpg

Re: My BBC couple pictures.
 

Nice Brodix heads, what heads are they CC wise and what do they flow are they setup for low to midrange or mid up. Looks like a large oval port.

Re: My BBC couple pictures.
 

They are 270cc suppose to be good from idle to about 6800. I am putting the Brodix HV 2007 intake on it.