Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

WOW!!
Posted via Mobile Device

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

0999999999999

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

1444444444

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

last pic for tonight

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Black 72 steering wheel, 72 inner grill, np205 shift knob, 72 blazer 4wd auto/ac fan shroud to 99320. Thanks.
Posted via Mobile Device

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

62 short step, I have some drive quality rear sport bumpers, they are not perfect and have tag brackets but no bumper brackets. For a bumper and tag bracket $40 plus shipping

Lex, I know thats what I said when I was taking pics:lol:

Truckseats, I only have a couple black steering wheels, they are driver quality. $30 plus shipping. I'll have to check on iner grills. No 205 shifter knobs and no 4x4 fan shrouds

Thanks Randy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

any 72 1/2 ton coil posi's? how much for the tilt in post 24?

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Randy
Sway bar, lower part of steering column shaft for PS conversion and Rochester 2 jet let's make a deal
Thanks
Jess
Posted via Mobile Device

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Chuck, only one posi and its in the one 6 lug rear, came out of 69 with 3.08 gears. Tilt is $240 shipped, shifter pin hole is whollared a bit and tilt itself has a little play. Thanks Randy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Randy, let me know what shipping is when you get a chance.

Thanks,

Jeremy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

ok.I'll pass on both. thanks

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Jess, sway bar complete would need new rubber bushings $65 shipped, lower section for steering column $10 and box it with sway bar. Not sure what I have for carbs out there, I'll have to look, it would have to be shipped separate. Thanks Randy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Randy, don't be selling my burb man! :lol:

How much for the bed side tool box last pic in pic 5, tool box door door with the key, and 2 brake pedal pads with trim? Also, did you ever come up with a price on that AFB from thet BB? Thanks Ryan.

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Ryan, heck ya I'll sell you the burb, the guy that owns it won't care;) The tool box insert is $20, door is real rusty and key does not turn $10. I'll look on the brake pedals. And $40 for carb. Thanks Randy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Holy American Pickers!!! Is this what 67-72 Heaven looks like?!?!? I was scrolling down and it just kept going... and going... and going... I'd love to have that 67-68 hood, But I'd pay more in shipping than I paid for my whole front clip, haha. I know where to come when I need something specific now.

VERY NICE COLLECTION OF PARTS!

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Woodgrain glove box doors? The toolbox door have any useable parts on it?

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Jeff, not quite heaven but close, just kidding

Eric, $50 each, one of them the aluminum is bowed someone tried to pull it off door, I bought it that way off here. No toolbox door has not got much

Thanks Randy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Hi will you ship inner fender if so can you get some pics of the best right side one you have and price 84003

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Any rust free 69-72 chevy radiator supports. If so how much shipped to 05478
Posted via Mobile Device

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Randy,

Any nice black floor shift columns? Also any 16" 6 lug rims? Also looking for white 3/4 hubcaps ;) Looks like you've really stocked up since my last visit! Those parts bins are fillin up.

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Ill take the sway bar and lower shaft and the carb in the last pic in post 18 the one in the middle of the pic can u turn it over and take a pic Randy am I right about needing that lower shaft when doing Manuel to P S conversion and will u include the brackets that hold the sway to the frame as mine was not equipped originally

Posted via Mobile Device

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

i could use some pieces for a stock sliding window if those are stock. there is a finish on either side of the small sliders - not the latch side - will you part them or just whole assembly . thanks

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Reeds72, sorry I don't ship inner fenders

rochlow, the rad supports I have have some light rust in pass tray

Jud, I have a couple floor shift columns but they would need paint. No 16 inch wheels right now, sold the ones I had. Oh ya hubcaps;) yes I need to do some sorting, its kind of mess out there

Jess, I'll get pics of carb. On the shaft, if you have a one piece column, what I mean is a solid column from top to steering box, you'll need the shaft. Yes brackets come with sway bars

Thanks Randy

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

blazer top and back hatches? passenger side fender with no rust?

Re: Valentines SPECIAL 67-72 PARTS ALOT of them
 

Kelly, I think they are both aftermarket, but I only sell sliders complete anyway. Thanks Randy