Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Sharpie interested in seatbelts and headliner....any thoughts on price for belts I will take pending price

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

also how bad is the chalking on the door panels?

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Belts will be $150. 72blazr will have first shot. Chalking is pretty bad on door panels. Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dennis, any flaws in the headliner and visors?

Thanks,
Ray

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hi Ray, I will check them over very carefully for you. They appear to be flawless. I'm a little nervous about removing the trim since I've never seen any near this nice. Any suggestions would be appreciated (without cutting the cab open!). Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dennis I will take the cluster and guages. Will send paypal in few when you confirm. Thanks, Harold

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Sharpie waiting to hear on belts and visors...lmk

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dennis,

I will wait to see if you work a deal with Leroy B1 on the visors.

Thanks,
Ray

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hi Harold, PM on the way. Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hi Ryan, I am going to start disassembly tomorrow afternoon. I will post pics then. Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Still inteterested if you'll throw in the bolts pending pics. Thanks.
Posted via Mobile Device

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Thanks Dennis, I'm going to hold off for a bit, I have a guy coming Wed to look at alot of my parts if he buys a bunch I'll more than likely buy it. But don't wait on me. Randy

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Sounds good Randy. I'm sure he will find some treasures to buy! Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dennis, If I am first in line on these items, I will take the headliner,trim and visors pending condition of them. Also vent window screw set if nice too.

Thanks,
Ray

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dan Tippmann is interested in some of this stuff. I just called him and left message. It is good to know sone really nice stuff is still out there.

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Thanks Paul, always a pleasure to deal with Dan and you guys. Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hi Ray, looks like you are first up on headliner and visors. I will post detailed pics in the PM tomorrow for you. Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dennis, I will take the door panels w/inserts and arm rests,glove box also pending condition. Do you have a contact number I can call you tomorrow?

Thanks,
Ray

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dennis, will you be parting the whole truck? If so I'd be interested in the fender bashing.
Posted via Mobile Device

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Sharpie,
How are the vent ball and housings? How much shipped to 95357?
-Richard

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hoping to keep it together as a functioning camper and just downgrade the interior a bit! Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hi Richard, I will post some pics tomorrow. Thanks, Sharpie

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Sounds good. Thanks, Sharpie!
-Richard

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Hi Sharpie, I'm interested in the throttle control. Can I add this to my existing cluster and everything look correct? Please post some pictures of what's included and how it's installed. Thanks, Dan
Posted via Mobile Device

Re: 1972 Cheyenne Super woodgrain interior. Near NOS!
 

Dan,

I thought I'd chime in. As I was coincidentally looking at the backside of a bezel today, I noticed the factory spots for cutting out the holes for a Choke, Throttle, Washer, and Lights. You will need a correct hole cutting drill bit with fine teeth. Cut from the backside. You will need one of the the little throttle pieces such as the one on Sharpie's bezel to finish it off. It will look 100% correct.
-Richard