Re: static dropped square bodies with 15s
 

Goin out on a limb but I am willing to say those are Crager S/S's on that white square body..

Re: static dropped square bodies with 15s
 

I love this stance. Do you have any side pics of the truck for a distance?

Re: static dropped square bodies with 15s
 

2.5 drop spindles/ 3 springs, flip kit with 1 inch drop shackles
http://i799.photobucket.com/albums/y...5/IMG_0501.jpg

heres when i moved the leaf spring to the 2 inch drop shackle hole
.
http://i799.photobucket.com/albums/y...5/IMG_0691.jpg
.
and when the helper air bags are inflated to haul with
.
http://i799.photobucket.com/albums/y...5/IMG_0692.jpg

Re: static dropped square bodies with 15s
 

Here is my 73. Front has 3" spindles, 1" springs with a half coil cut. Rear is a flip kit with 2" drop shackle. No clearance issues or modified body panels.

Re: static dropped square bodies with 15s
 

Cut 2 coils, flip kit 245/60's on 8's 325/50's on 10's will need some surgery on the rear. Shouldve been 4.5 bs vs 3.75

http://farm9.staticflickr.com/8436/7...55221999_b.jpg
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

Re: static dropped square bodies with 15s
 

I like this thread
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

Wow! These trucks look great.
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

Love the truck and the stance. That's exactly the hardware I ordered, minus the shackle. But after seeing yours I may have to buy the shackle too.
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

What size tire are you running?
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

what header setup are you.running? Or are they manifolds? Reason I ask is I ordered the same lowering setup you have, and was wondering if my long tubes are gona work. I'm seriously doubting it, by looking at your pic.
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

Nice looking truck Max

Re: static dropped square bodies with 15s
 

get the shackles with the option of the 1 or 2 inch drop. took me just a few minutes to go from the 1 to 2 inch drop

the tire size is 235 70 15

Re: static dropped square bodies with 15s
 

3 in spindles, full coil cut, flip kit, 2 in shackles, had some weight in the bed in this pic, otherwise rear tires are flush with wheelwells

Re: static dropped square bodies with 15s
 

Are you running headers that low? Can you?
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

what's a good set of rally's run?
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

5/5 DJM Drop. 3"spindles, 2"drop coils, flip in rear. Never did a C-Notch and it rode great. 15X8's front, 15X10 rear with 295/50s.
http://images5a.snapfish.com/2323232...85348348nu0mrj

http://images2.snapfish.com/23232323...25257348nu0mrj

http://images2.snapfish.com/23232323...3B276348nu0mrj

Re: static dropped square bodies with 15s
 

what kind of exhaust setup are you running?headers?
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

That red truck sits right
Posted via Mobile Device

MDc10 check out dougs D-310c they dont hang below the rail

Re: static dropped square bodies with 15s
 

Man there are some nice trucks in this thread. If you want to check mine out look in my thread in my sig.
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

you can go to a junkyard an get the 15x8s for cheap....thats wht i did and then i ordered the 15x10's from summit racing they was like $240 bucks shipped for both

Re: static dropped square bodies with 15s
 

It has a set of hooker headers on it from Jegs.
Posted via Mobile Device

Re: static dropped square bodies with 15s
 

http://i49.tinypic.com/34oq7nn.jpg

http://i50.tinypic.com/2mrtkir.jpg

Re: static dropped square bodies with 15s
 

factory manifolds and duals into flowmasters. i'll being switching to a 454 and mid length headers next spring. i beleive there will be enough clearence:metal:

Re: static dropped square bodies with 15s
 

Could you guys spare me a lil advise? the djm spindles are a good choice for a half ton c10 cause of the price.. i was wandering if 5 inch flip kit in the rear is excessive. im also wandering what cutting does to your coils? wouldnt that make handling the truck different? Are you using after market or stock A arms?