Re: 67 SWB Custom "Jane" Piece by Piece project
 

So just a couple small updates, I've got the front suspension installed minus front sway bar and power steering box. I installed the motor and also the old Th400 so the rear of the motor has support. Last I installed the rear differential to check clearance which I'm glad I did because my ECE track bar actually hits the frame before full dump so ill have to go with one that mounts on the side of the trailling arm rather than above it.
Attachment 1064338
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Attachment 1064340
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Attachment 1064345
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Attachment 1064346
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Or you can use a lowering block between the ECE mount and the rearend housing,...

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Ya I have 2"blocks and the angle of the bar it still hits ill have to get a pic of it later
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Pics look great man!!

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Thanks Shawn its not much but a little bit is better than nothing I guess :)
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

You can kinda see in this picture
Attachment 1064487
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Pumpkin will hit the bed floor before you get that far.
Put a snubber in there and go.
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

I'm already raising the floor 4" to make room for a few things, the pumpkin being one of them
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Looking Like a great build, keep up the work.

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Thanks! Do you have a build of your own?
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Hello Fastcam, ya I have 69 longbed that I am building.

It is a slow project as I am building it as I get money, however income tax check arrived last week so that has gave it a boost for a while.

I haven't started a buildthread on here yet, I want to get alittle farther on it.

Kevin

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Looking good man! Its going to be damn nice when its done!
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Ya one day lol I need to start putting some serious time into it
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Just take your time and the end result will be worth it!
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Ya I here you but I just get all antsy being around everyone else's truck like the meet last week, makes me just want to slap it together and go!
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

But think if you go as you are youll have the nicest one at the meets
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

As long as I can keep Chris from starting on his dropmember truck you might be right
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Lol. When is he starting that one?
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Who knows he's always to busy buying parts and parts trucks. Plus I stole the frame that he had already started with
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Sounds like it should start movin right along with the tax boost, if you haven't already you should check out the northwest c10's Facebook page
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Lookin good, I wish my bumper was that low to the ground
Posted via Mobile Device

Re: 67 SWB Custom "Jane" Piece by Piece project
 

Thanks I just can't wait to see some sheet metal behind the bumper :)
Posted via Mobile Device