Re: another Oldschool sneak peek
 

well its been a couple weeks since I got to post any new updates on the truck, I've made some good progress but it just seems nothing goes right when you want it to. But I guess that's the way things go when you do it on your own, here are the updates and some pics. I got the fenders on and all the glass in, new door handles,locks, mirrors and started the long slow process of wiring it up and getting the motor fired up.
Attachment 1261091

Attachment 1261092

Attachment 1261093

Attachment 1261094

Attachment 1261095

Re: another Oldschool sneak peek
 

Attachment 1261096

Attachment 1261097

Attachment 1261098

Attachment 1261099

Re: another Oldschool sneak peek
 

Here is something cool I did and I never saw it done before, not saying it was never done but I think its pretty cool. So I was looking at new grills and I couldn't see paying 1000.00 for a grill that said Chevrolet on it, so I bought one for a third of the price and made it to say Chevrolet. It was pretty easy to do and ill show you how I did it for those who want to do it also. And here are the steps I did and the things you will need. First you will need a grill, 67-68 chevy hood emblem kit, paper ( I used butcher paper ) hunk of cardboard, pencil, drill bits (not sure what two I used but im sure you can figure it out).
1st thing I did was take old grill that said Chevrolet and lay it on saw horses and tape paper over Chevrolet, I used one long piece but you can tape regular white paper together and it should work.
2nd step was I took a short carpenters and shaved it down so the pencil lead was showing along the whole side, then I went over the paper to show the Chevrolet. this is just for the spacing and the letters on the grill and the emblems are almost the same.
3rd I took the paper off the grill and stuck it over a old cardboard box this is so you can push emblems threw the paper and it will give you the lay out of the studs on the back of the emblems. Just hold emblem of the paper get it lined up and push it threw, VERY IMPORTANT..........CHECK THE TWO E's IN THE EMBLEM KIT.......the two in my kit had different studs on the back so as you pop them in the cardboard leave them in till you done then you cant screw it up. I didn't screw mine up but got confused when the first e wouldn't fit then saw they were different.
4th take emblems out of cardboard and match up the studs on the back of the emblems with some drill bits. there are two studs on the back of each letter one has a nut the other is just a stud, the one with the nut is bigger. and then I cut the paper down to around a 3" piece and put it on new grill got it centered and lined up the taped it down, once I had it centered I used the smaller drill bit and drilled all holes, then I went back and drilled the holes for the studs with nuts......now some holes I had to round out a little but it was pretty easy to do when you get over drilling in to a brand new grill.
now here are some pictures
Attachment 1262526

Attachment 1262527

Attachment 1262528

Attachment 1262529

Attachment 1262530

Re: another Oldschool sneak peek
 

I've never seen that done on a grille. What a great idea!

Re: another Oldschool sneak peek
 

I was worried about the R and how it would fit on the bend in the middle but it fit almost like it was supposed to be there.

Re: another Oldschool sneak peek
 

What type of emblem kit did you use?

Re: another Oldschool sneak peek
 

What R you talking about? (sorry)

Re: another Oldschool sneak peek
 

The 67~68 hood has a crease right where the R in Chevrolet sits. That's why it fit so well. Amazing job, man. I love it!

Re: another Oldschool sneak peek
 

yes its a 67-68 hood emblem kit........the R is bent to fit the center line of the hood but it fits the bend in the grill perfect.

Re: another Oldschool sneak peek
 

Or a complete frame off resto....

Nice work!

Re: another Oldschool sneak peek
 

Great looking work oldschool18! Subscribed!

Re: another Oldschool sneak peek
 

Slow-1 I wasn't planning it that way but you know how it goes you tear into stuff and before you know it the frame is bare.

Re: another Oldschool sneak peek
 

And a special thanks to member Vettevet for helping me with the alternator, I just hope when I fire her up tomorrow she doesn't disappoint.

Re: another Oldschool sneak peek
 

Dude thats neat...regarding the grill! BTW that silver is lookin effin hot!

Re: another Oldschool sneak peek
 

Had like the worst weekend ever.............my father came over so we could start the motor up and get it set and in time and the damn brand new starter wouldn't shut off. Well NAPA was closed but I have a couple old ones laying around, so I got the old starter on and it worked then. So we get the motor running and it sounds great and then we start smelling gas....................After walking around the truck I see the tank has a small pin hole in it, the tank was out of a blazer that flushed and checked for leaks over a year ago but I guess sitting empty for over a year with a little moisture in my garage did it in. Well I ordered a new tank the truck is running but my problems weren't over yet........I backed the truck out sunday morning prepped the hood, cowl, glove box door and ashtray.............Got all my stuff out for paint.........mixed up some paint went to take the lid off my gun and that damn thing would not come off, so I ran into my dads garage and grabbed his gun. Well I should of checked it first because it had the primmer tip in it and it was only shooting paint out of one side. Now I didn't notice this because I was messing with the setting think it was that but after I got the first coat on everything I figured it out. Everything came out pretty good the hood had some orange peel but that **** will buff out or so Joe Dirt says. I'll post some pictures soon just need to catch up on some sleep right now.

Re: another Oldschool sneak peek
 

OK after some much needed sleep and a few beers I think my blood pressure is back to normal and as promised here are some pictures.
The pictures aren't much but it does show some progress.
Attachment 1264743

Attachment 1264744

Attachment 1264745

Attachment 1264746

Attachment 1264747

Re: another Oldschool sneak peek
 

well since all it has done all week is rain I did a little work in the cab, got the new carpet in and the new pedal pads and the new steering wheel. And I hooked up the heater controls and ran some wires for the stereo system, and I have been working on the custom center console/sub box and amp rack and some custom gauges. I will be getting some pictures this weekend and hopefully the sun will shine and I can get the hood on and then get the bed painted. But here is one cause I don't want anyone putting up how this thread is worthless with out pictures....hahaha
Attachment 1265819

Re: another Oldschool sneak peek
 

Are those brake lines copper or are they painted steel lines?

Re: another Oldschool sneak peek
 

there copper nickel brake lines.......stores call it stainless but its not really stainless.

Re: another Oldschool sneak peek
 

What kind of headers do you have on it? So far its looking dang good. I'm in the middle of a frame off myself.

Re: another Oldschool sneak peek
 

This is 1 of the truest statements I've read in awhile. LOL

Re: another Oldschool sneak peek
 

they are headman silver ceramic shorty headers......there is another name I think they use besides silver ceramic. there was another board member who had them and I asked how they were holding up and he said they have been on for five years so I was sold. and they worked well with my color scheme. I wanted the truck on the road a year ago but I should of known better, my father says I turn everything in to a project........I say it keeps me in the yard and that's how I stay out of trouble.

Re: another Oldschool sneak peek
 

well I got the hood on and I got the white painted on the bed and tailgate. now all that's left to paint is the silver on those two and the truck will be almost whole again, and I never thought my garage would be suck a mess I got stuff everywhere.......besides painting I got all the little parts out slowly putting everything back together trying to finish up the gauges, center console, amp rack, sub box and everything else............I need some sleep and tomorrow I am going to paint some silver drink some beer and hang with my kids...................so to all the fathers out there I hope you guys have a great fathers day and many more to come!!!!!!!

Re: another Oldschool sneak peek
 

Attachment 1266493

Attachment 1266494

Re: another Oldschool sneak peek
 

I think I am done painting.......I really hope I am done painting
Attachment 1266941

Attachment 1266942