Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Awesome, cant wait to see the final product

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Subscribed

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

I'd settle for a decent hot side...

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Pic of the downpipe.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

looking good.

you got an eta for first fire? i'm getting into a turbo build here shortly and want to ballpark a timeline for parts gathering purposes. any info and insight is appreciated.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

It's going to be a while before I actually fire it but it's just cause I still have a lot of expensive stuff left to buy.

If I wasn't going all out with this thing and could get out a little cheaper on the stuff I have left to buy I could probably have it going pretty quick. I'm hoping to have it on the road in a year

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Hard to tell in the pic.. looks like the down pipe is going outside the frame rail? Which that will work..

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Following

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

No it goes on the inside between the frame and the motor.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

What size is the dp?
How's it going to tuck between the heater box, frame and manifold or do you have to pull the heater box?

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

It is 3"

It fits just fine. You will have to use some 90* fittings off the heater core and run the heater hoses to the passenger side fender to keep them away from the heater. There's plenty of room for the crossover to come in there along with the down pipe.

I'm going to be running a 4" on mine and that will be a little tight but still fit. I have seen a 5" on another guy truck but he had to notch the cab to get it in there.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Sweet. I wish this had been available before I dumped 3k into having my hot/cold side fabbed up.
I have a 5" on mine and had to pull the heater box entirely. No way it was going down there with the box still in.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

:eek::thud:

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Eh, it's all stainless, T6 and looks amazing. I don't mind paying for quality.
I knew I'd be going for 1k+ once it gets a good bottom end and trans so no reason to skimp now to do it all over again.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Did that price include the gates, bov, or intercooler? Just curious. I might need to get into this business. lol.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

The A/C brackets are now available through lsbrackets.com

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Kwik Performance has a similar bracket that tucks the compressor in close to the engine. I just ordered my vintage air system with that bracket. I believe it uses a smaller compressor too.

Credit to Wasted Income, I got the idea on his build thread.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

Yea that Kwik bracket is sweet. I wish that would have been available when I built my hotside...because it doesn't fit on the blazer by a very small amount one of the crossover pipes interferes with the compressor pulley....so it ended up on the K/10. lol. Here's a couple pics for anyone considering buying it. It does use the same compact Sanden SD7 that the Vintage Air Front Runner and March Performance FEADs use.

https://imagizer.imageshack.us/v2/70...0/546/7msu.jpg

https://imagizer.imageshack.us/v2/70...90/18/a2kl.jpg

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

They do and lsbrackets.Com has other brackets for both the r4 compressor and the Sandeen but these were specifically designed to work with the turbo on Tricks log manifold. This one was designed to use the r4 because that is what the majority of the 88-98 trucks had factory.

Re: Bolt on Turbo Kit for LS swapped OBS trucks
 

No.