Re: Prototype center speaker holder
 

PM sent with tracking info. We made a slight revision and upgraded your speakers for free due to the delay. Thanks again for the order.

Paul, I have blanks cut and ready to build. So as soon as you order I will build yours and get it in a box.

Re: Prototype center speaker holder
 

Done! Looking forward to this little project.

Paul

Re: Prototype center speaker holder
 

Got my set up today. I'll pass along some feedback when I get it installed. Thanks.

Re: Prototype center speaker holder
 

Please do Tdrcreyn4, I am seriously considering this.

Re: Prototype center speaker holder
 

Hey Kyle,

Any chance I can get custom sized speaker holes cut? I need 3.890" holes instead of 4" holes. If you can't, I understand.

Thanks.

Re: Prototype center speaker holder
 

I ordered mine from the website the other day. I can't wait to get this little part of my project moving ahead. This should be a sweet addition to my truck considering it never had the center speaker from the factory...

Paul

Re: Prototype center speaker holder
 

I have yours 95% done, waiting on the new thread inserts to get here Monday. Ill get them pressed in and it shipped out to you.

Re: Prototype center speaker holder
 

Kyle,
The speakers have raised lip that is just outside of the speaker surround, this lip is even with the frame edge so if the speaker hole is bigger than the O.D. of the raised lip, (3.890) then there will be gaps around the speaker. I know it probably won't have a big impact on the sound but I am OCD that way. If you can make the speaker holes a custom size then I would appreciate it and will order this from you. If you can't, or if it's too much trouble, I understand and might still order from you. Thanks, Steve







Attachment 1486168

Re: Prototype center speaker holder
 

Let me look tomorrow and see what I would need to re tool. If I can do it effectively then I will.

Re: Prototype center speaker holder
 

Thanks Kyle. I'll standby.

Re: Prototype center speaker holder
 

I would like one and maybe two. Do you know if it will work in a '63 C-10 dash?

Re: Prototype center speaker holder
 

Although I have not installed one on a 63. it should work. You can take a piece of cardboard, cut it 10"x7" and stick it up there and that should tell you if it will work for sure.

Starting to get some feedback and pictures from customer installs. So far so good. everyone seems to be happy so far and thats my #1 goal.

Re: Prototype center speaker holder
 

Kyle,

Can you give the spacing measurements for the speaker mounting screw holes?
My speaker frames look smaller than the speakers you used so I just want to doublecheck that the mounting holes are the same.
Thanks!

Re: Prototype center speaker holder
 

I believe 3.25 square

Re: Prototype center speaker holder
 

Thanks Kyle, those measurements will work just fine. Any news on the possibility of a reduced speaker cutout size?
Thanks.

Re: Prototype center speaker holder
 

Steve, after looking at tooling options it would require a whole new jig to be made to get the size whole you are looking for. Sorry. The kenwood speakers call for the same size hole you are looking for. I cut them a little bigger to make sure there was no interference with the part of the speaker that moves. (no vibration noises)

If there is anything else I can do please let me know.

Kyle

Re: Prototype center speaker holder
 

Any luck on install? I had another customer email me with some tips. He said rubber gloves are a must as the adhesive is a bit sticky. Also he removed the glove box liner and the passenger defrost vent hose. Said the piece slid in very nicely.

He was also extremely happy with the quality and volume that was produced by just the center speakers. here is a picture of his install.

Re: Prototype center speaker holder
 

Thanks for considering that for me Kyle. Question: the holes that you are cutting, are they an exact 4"?

Thanks.

Re: Prototype center speaker holder
 

Here is the actual hole size and spread for you. Hope this helps.

Re: Prototype center speaker holder
 

Paul, I just wanted to give you a update. The new inserts we switched to came in, I presses them in and after a little testing ended up failing. Although they failed under a condition I dont ever see them being in, they still failed. So Im headed back to the old tried and true design. You will have yours soon.

Re: Prototype center speaker holder
 

Sounds great. Take your time.

Paul

Re: Prototype center speaker holder
 

Kyle,
Got my set up installed and love it. As info, I installed this in an AC truck. I had to make a very minor modification to clear the hoses by thinning the front corners by about half just over the center plastic vent. Took 2 minutes with a multi-max tool and I did it after the piece was installed. Looks great with no modifications to the truck and is very solid. Thanks for the part, it was exactly what I was looking for.
Todd

Re: Prototype center speaker holder
 

Thats great to hear Todd. Thanks for the feedback.

Re: Prototype center speaker holder
 

Not to hijack the thread but FYI the fredstruckparts site is down.

Re: Prototype center speaker holder
 

Thanks for letting me know. We have been having some major issues lately. The server company keeps telling me is cyber attacks. They are starting to irritate me.