The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MD bench seat (https://67-72chevytrucks.com/vboard/showthread.php?t=700047)

richard2717 10-10-2016 10:35 AM

Re: bench seat
 
2 Attachment(s)
Quote:

Originally Posted by gmc 2500 4x4 (Post 7736850)
i could use the bottom foam if ya tear the seat down.

I have another seat in the 72 burb I am taking apart. I will check on the foam and see if its good.

Edit: Here is a picture of the lower cushion. it is not torn up but it is damp from all the rain, not sure if good enough for what you might need?


.

richard2717 10-10-2016 10:56 AM

Re: bench seat
 
1 Attachment(s)
Quote:

Originally Posted by towbar (Post 7736943)
I looking for the spring that is attached from the slider track to the adjuster arm, also could use the drivers side front corner spring if your gonna tear it apart?

thanks

Also, I forgot about the seat in the Suburban I am taking apart, is this the seat spring you are referring to?


.

70'Dave 10-10-2016 02:47 PM

Re: bench seat
 
I have to pass had something come up. Thanks anyway

gmc 2500 4x4 10-10-2016 06:29 PM

Re: bench seat
 
whats the foam worth shipped 14063. its going on a 69

richard2717 10-10-2016 07:29 PM

Re: bench seat
 
3 Attachment(s)
Quote:

Originally Posted by gmc 2500 4x4 (Post 7738591)
whats the foam worth shipped 14063. its going on a 69

I can do $75 shipped. it looks decent other than the hole shown in the one picture. I would think some added foam stuffed in there would keep it tight.

Richard


.

richard2717 10-10-2016 07:33 PM

Re: bench seat
 
Quote:

Originally Posted by 70'Dave (Post 7738443)
I have to pass had something come up. Thanks anyway

No problem


Tim your up again, it will be Easter before you know it. :lol:

gmc 2500 4x4 10-10-2016 07:51 PM

Re: bench seat
 
Quote:

Originally Posted by richard2717 (Post 7738643)
I can do $75 shipped. it looks decent other than the hole shown in the one picture. I would think some added foam stuffed in there would keep it tight.

Richard


.

hey richard i will take for 75.00 shipped, its alot better than mine, pm details on $$ paul

richard2717 10-10-2016 07:54 PM

Re: bench seat
 
Quote:

Originally Posted by gmc 2500 4x4 (Post 7738661)
hey richard i will take for 75.00 shipped, its alot better than mine, pm details on $$ paul

Sending PM

towbar 10-10-2016 09:50 PM

Re: bench seat
 
thanks for keeping me in mind
yep....those are the springs, I'll take the lever spring for 8 bucks.
How much for the complete front drivers front corner seat spring you have arrowed too in post 27?
thanks!!

special-K 10-11-2016 09:01 AM

Re: bench seat
 
Ok Richard, I'll see you Easter! :lol: Hey, has that show in Fruitland come and gone yet? I remember I went down to OC to eat at Phillips' and it was their last day of the season. If it's yet to come that would be a perfect time to get it.

For the rest, I'm sayin' I will take it :cool:

richard2717 10-11-2016 09:12 AM

Re: bench seat
 
Quote:

Originally Posted by special-K (Post 7739084)
Ok Richard, I'll see you Easter! :lol: Hey, has that show in Fruitland come and gone yet? I remember I went down to OC to eat at Phillips' and it was their last day of the season. If it's yet to come that would be a perfect time to get it.

For the rest, I'm sayin' I will take it :cool:

Tim,
They decided to not have the truck show since participation fell way off over the last few years. plenty of people were coming to look but not many people bringing rigs. Bummer, I always enjoyed it.

I have to go to Fredrick to install some signs either end of this week or beginning of next so I can bring it over and maybe meet some where?

Richard

richard2717 10-11-2016 09:39 AM

Re: bench seat
 
1 Attachment(s)
Quote:

Originally Posted by towbar (Post 7738807)
thanks for keeping me in mind
yep....those are the springs, I'll take the lever spring for 8 bucks.
How much for the complete front drivers front corner seat spring you have arrowed too in post 27?
thanks!!

Just making sure I have what you are wanting?
this along with the other lever spring, I can get it all to you for $25 shipped

thanks
Richard


.

towbar 10-11-2016 03:29 PM

Re: bench seat
 
Hey that sounds good, post or send me a pm on your payment info, I'll get you some $. I appreciate your help!

richard2717 10-11-2016 03:33 PM

Re: bench seat
 
PM sent

towbar 10-11-2016 09:21 PM

Re: bench seat
 
Payment and PM sent, thanks!!

richard2717 10-11-2016 09:23 PM

Re: bench seat
 
Quote:

Originally Posted by towbar (Post 7739734)
Payment and PM sent, thanks!!

Got it & will get it sent out tomorrow. Will PM tracking once sent out

thanks
Richard

special-K 10-12-2016 08:31 AM

Re: bench seat
 
That's before Halloween! What next, snow in August??

Sorry about the show. Rain messed it up for me the year after I came and not sure about after that. You gotta go if ya want a show. I thought it was decent sized that year.

I can meet you. I'll PM my number. Get me yours back so I don't think you're a bill collector :lol:

GR8-68 10-12-2016 09:42 AM

Re: bench seat
 
Hey !!! I see a highlander package !!! :chevy: Are you parting that out ?

richard2717 10-12-2016 11:22 AM

Re: bench seat
 
Quote:

Originally Posted by richard2717 (Post 7739737)
Got it & will get it sent out tomorrow. Will PM tracking once sent out

thanks
Richard

Sending PM with tracking info

Thanks

richard2717 10-12-2016 11:24 AM

Re: bench seat
 
Quote:

Originally Posted by special-K (Post 7740050)
That's before Halloween! What next, snow in August??

Sorry about the show. Rain messed it up for me the year after I came and not sure about after that. You gotta go if ya want a show. I thought it was decent sized that year.

I can meet you. I'll PM my number. Get me yours back so I don't think you're a bill collector :lol:

Sounds good, It will either be Monday or Tuesday at this point so let me know what day works better for you. I will PM my cell #

richard2717 10-12-2016 11:26 AM

Re: bench seat
 
Quote:

Originally Posted by GR8-68 (Post 7740108)
Hey !!! I see a highlander package !!! :chevy: Are you parting that out ?

All I have is a 2nd row burb seat and it is listed here in post 18.
The front seat cover and seat was junk

thanks


http://www.67-72chevytrucks.com/vboa...d.php?t=719644


.

towbar 10-19-2016 03:21 PM

Re: bench seat
 
Richard, got the parts when I returned from vacation...thanks!!

richard2717 10-19-2016 05:01 PM

Re: bench seat
 
Quote:

Originally Posted by towbar (Post 7746707)
Richard, got the parts when I returned from vacation...thanks!!

Thanks for letting me know

richard2717 12-28-2016 05:09 PM

Re: bench seat
 
I still have the tracks, upper cushion and some of the springs from the seat I am dismantling


All times are GMT -4. The time now is 06:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com