The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Victim of changes... (https://67-72chevytrucks.com/vboard/showthread.php?t=733081)

specialtyretail

04-02-2017 02:09 PM

Re: Victim of changes...

2 Attachment(s)

Yet another unsolicited product endorsement. When spark plug/plug wire clearance is close,, but just not there, I have had great luck with these NGK #2771 plugs. They are a replacement for Autolite #25 and AC R45TS. They may give you just the room you need and are a damn sight better than those Accel shorty plugs.

specialtyretail

04-02-2017 03:18 PM

Re: Victim of changes...

2 Attachment(s)

Closer, but not as far as I wanted to be.... I am enjoying this, but business is calling....

specialtyretail

04-05-2017 06:39 PM

Re: Victim of changes...

2 Attachment(s)

Just a little bit more. I plan on fitting and running the spark plug wires next.

Boog	04-05-2017 09:20 PM

Re: Victim of changes...

Quote:

Originally Posted by specialtyretail (Post 7903367)

It is gradually getting there, but i am done for the day. As the wife is known to say about me,, "I am not 30 years old anymore".

Same here bud. I am way past 30 and I'm reminded of it regularly when I try to put in a full day out in the shop. The wife don't have to tell me. ;)
Getting old. It beats the alternative.
I agree with painting the aluminum intake. It keeps it's look low key.

specialtyretail

04-06-2017 11:46 AM

Re: Victim of changes...

Quote:

Originally Posted by firedemon (Post 7907580)

looks real nice if your keeping it for you use a clutch fan you wont regret it

I am looking for one even as we speak. Thanks, Fred.

67 chevelle

04-06-2017 01:49 PM

Re: Victim of changes...

Judas Priest that looks good !!

specialtyretail

04-06-2017 04:41 PM

Re: Victim of changes...

Quote:

Originally Posted by 67 chevelle (Post 7908237)

Judas Priest that looks good !!

Thank you very much. Just a good cleaning and some paint.

71threequarterton

04-06-2017 05:21 PM

Re: Victim of changes...

Quote:

Originally Posted by 67 chevelle (Post 7908237)

Judas Priest that looks good !!

First thing I thought of :metal: :metal: :metal:

specialtyretail

04-08-2017 05:19 PM

Re: Victim of changes...

2 Attachment(s)

I have always been a fan of these Smoothie wire seperators/holders from the Made 4 You company. I have used them for years and they come as a set that will also do big block Chevy engines. Very economical and super easy to use. $40.00 well spent.

lks dcvn

04-08-2017 05:59 PM

Re: Victim of changes...

Looks great!

CG	04-08-2017 06:02 PM

Re: Victim of changes...

Quote:

Originally Posted by specialtyretail (Post 7909984)

They look really nice, not all bility looking.

specialtyretail

04-08-2017 06:07 PM

Re: Victim of changes...

Quote:

Originally Posted by lks dcvn (Post 7910010)

Looks great!

Quote:

Originally Posted by CG (Post 7910013)

They look really nice, not all bility looking.

Thanks for the kind words guys. I know it is nothing fancy, an LS swap or covered with billet parts, but we are glad with the way it is going.

specialtyretail

04-10-2017 10:19 AM

Re: Victim of changes...

Power steering brackets can bite my ass.....

Boog	04-10-2017 11:00 AM

Re: Victim of changes...

So how do you really feel about em? �� Yeah they can be a pain alright.

FleetsidePaul

04-10-2017 11:11 AM

Re: Victim of changes...

X3 on the painted intake.

specialtyretail

04-11-2017 10:36 AM

Re: Victim of changes...

Quote:

Originally Posted by FleetsidePaul (Post 7911746)

X3 on the painted intake.

Thanks, it is the look we are going for.

mattfranklin

04-11-2017 11:54 AM

Re: Victim of changes...

Beautiful!

specialtyretail

04-17-2017 08:13 PM

Re: Victim of changes...

1 Attachment(s)

FINALLY got the power steering brackets the way I need them to be... Damn...

FleetsidePaul

04-18-2017 12:10 AM

Re: Victim of changes...

Go man go! it looks sweet!

RDrancher

04-18-2017 07:45 AM

Re: Victim of changes...

Looks way smoooooth. I like it.

What headers are you using?

specialtyretail

04-18-2017 07:49 AM

Re: Victim of changes...

Quote:

Originally Posted by FleetsidePaul (Post 7918778)

Go man go! it looks sweet!

Thank you Paul, I appreciate that.

specialtyretail

04-18-2017 07:50 AM

Re: Victim of changes...

Quote:

Originally Posted by RDrancher (Post 7918892)

Looks way smoooooth. I like it.

What headers are you using?

3/4 length stainless steel. I have used these for several years on most of our builds. The flanges are thick and they have fewer header gasket leaks than most we have used in the past. Thanks, Fred.

specialtyretail

04-19-2017 08:06 AM

Re: Victim of changes...

2 Attachment(s)

So, I made the decision to shut the shop down til Sunday so I could get this job finished up. The motor IS going in Saturday afternoon. Made a little more progress last night after work,, getting there.

specialtyretail

04-20-2017 08:01 AM

Re: Victim of changes...

3 Attachment(s)

Got the motor for the shop truck looking the way I want it. Now I get to take it back down for the install this weekend.

specialtyretail

04-22-2017 11:30 AM

Re: Victim of changes...

Motor IS going back in this afternoon....

All times are GMT -4. The time now is 01:33 PM.

Page 2 of 3

Show 40 post(s) from this thread on one page