The 1947 - Present Chevrolet & GMC Truck Message Board Network - Request for help on L6 offset air cleaner riser pipe dimensions.

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Request for help on L6 offset air cleaner riser pipe dimensions. (https://67-72chevytrucks.com/vboard/showthread.php?t=742262)

bill3rail

07-30-2017 05:26 PM

Re: Engine Access

Quote:

Originally Posted by VWNate1 (Post 8003568)

Just so Bill ;

When I were a lad in the mid 1960's, I had me a Brand 'F' F100 stepper, 240CID i6 three on the tree etc.

I'd sit _inside_ the engine compartment(I was 6'1" then) on the fender with my legs on the frame rails....

I had a "F" truck with a straight six and stood beside the engine, on the ground, to tune it up. At first it thought it looked funny, but I enjoyed not reaching so far.

Bill

Wrenchbender Ret

07-31-2017 10:22 AM

Re: Request for help on L6 offset air cleaner riser pipe dimensions.

I've made them several times out of exhaust tubing.

VWNate1

07-31-2017 01:26 PM

Request for help on L6

It pleases me greatly to know there are more i6 lovers out there :chevy: .

HOTFUN

04-03-2020 05:52 PM

Re: Request for help on L6 offset air cleaner riser pipe dimensions.

subscribed. I need to find one with the pcv breather hose attachment. I may add one to my straight one.

bill3rail

06-02-2020 07:05 AM

Re: Request for help on L6 offset air cleaner riser pipe dimensions.

Quote:

Originally Posted by HOTFUN (Post 8708087)

subscribed. I need to find one with the pcv breather hose attachment. I may add one to my straight one.

They seem to be like Hen's teeth. When I was searching for the offset air cleaner, I ended up buying three different ones to get all the parts I needed to build one complete setup to use.

Bill

HOTFUN

06-02-2020 10:05 AM

Re: Request for help on L6 offset air cleaner riser pipe dimensions.

I got lucky and found a correct complete offset here from a board member.
Mark

bill3rail

06-03-2020 09:46 AM

Re: Request for help on L6 offset air cleaner riser pipe dimensions.

Quote:

Originally Posted by HOTFUN (Post 8750506)

I got lucky and found a correct complete offset here from a board member.
Mark

You should play the lottery!

All times are GMT -4. The time now is 01:01 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page