Re: Assembly Line Photos
 

OH the memories,I spent 30 years on the assembly line in Oshawa Ontario Car Assembly, 1983 to 2013.

Re: Assembly Line Photos
 

Keith,

I don't quite understand your last comment about the tug in the picture. Had someone just abandoned it at the end of their shift, and it's now in the way for the next shift?

How much did the assembly workers get shifted around to keep the job interesting? By time he retires, would a fellow have worked nearly every aspect of assembly, or would he have spent the whole 30 years installing door handles?

Re: Assembly Line Photos
 

Keith obviously knows if I’m correct or not but all CUCVs I’ve played with had (and one currently) had 3/4 ton frames, and 24V starting-some had dual alternators which were rated at 100a each. The one I’m helping with now has a D60 front and 14-bolt rear locking diff. all with 4.56 gears. I’m doing some electrical repairs to this one-replacing a few small parts then my buddy will be selling this one off.

Re: Assembly Line Photos
 

No - in the photo above the tug is sitting next to the line (between the pickup line and the main aisle) and is staged and ready to go if and when needed.

Pretty much everything was/is seniority based.

When we start up a new line, or a new shift in an existing plant, management has the ability to place workers where they think they will be a good fit. After that, if a worker wants to put in for a different job, or a better job with the commensurate pay increase, he can apply and if he has more seniority than the other person he can get that job.

Some folks were happy were they were, even if it was a tough job. My fender set guys tended to stay in that spot for a long time (which is good). Other folks would try to move to a repair job, or quality man, or even a driver out back, to try to get away from being tied directly to the assembly line.

K

Re: Assembly Line Photos
 

I always enjoy reading these posts about the assembly line, and of course the pics too. I can relate to the assembly line work, since I also work in an auto factory. I only have 10 months to go before retirement, at that time I will have been there for 30 years. Assembly line work takes a toll on the body.

I have to say, I get the biggest kick out of the tugger pic. GM had this back all those years ago. Where I work, which I can't say, due to confidentiality concerns. Up until about 10 years ago, we had to physically push the "no starts" off the line.

My Dad worked for GM, Fisher Body in Columbus Ohio. Worked there for 35 yrs. so I guess you can say that automobiles runs in our blood. One of his jobs, was making the tailgate band for the trucks. I never knew this, until I bought my 86 Chevy. The first time he came to see it, is when he told me about some of the parts he made for the trucks. Now I am most proud of the tailgate band I have. :chevy:

Re: Assembly Line Photos
 

My dad worked at Chevrolet Flint Manufacturing (Pressed Metal Division) so he made valve covers, oil pans, air cleaners, radiator supports, fuel tanks, etc for cars and trucks. He was there for 26 years before moving into a Central Office engineering position for his last 6 years.

By submitting ideas through the Suggestion Program he made enough money off of the '65/66 truck grilles to pay cash for our new '69 GMC stepside.

K

Re: Assembly Line Photos
 

Nice!! We also have the Suggestion System too. Quite a few people have done so many, they get a new car free, using their points earned.

Re: Assembly Line Photos
 

Having owned a few of these, I believe all the Blazer’s were 1/2 ton and the pickups are 1 ton. That’s what makes the CUCV pickups so desirable. I have a buddy who put the 1 ton running gear under a Blazer and that thing is a beast!