The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - CT 1969 CST/10 Part Out 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=816890)

lks dcvn

01-14-2021 10:59 PM

Re: 1969 CST/10 Part Out 4x4

what shape are the blue door panels in and do you have a price in mind? thank you

Leigh222

01-15-2021 09:12 AM

Re: 1969 CST/10 Part Out 4x4

Payment received Willys I'll hopefully get it shipped out today.

Leigh222

01-15-2021 09:14 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Gary 70 Jimmy (Post 8864278)

Looking for 1 rear spring hanger one of mine was cut

I'm looking to sell the frame as a roller but if I have no interest or if the frame is too far gone I will be sure to take a look at the hangers for you.

Leigh222

01-15-2021 09:15 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by lks dcvn (Post 8864313)

what shape are the blue door panels in and do you have a price in mind? thank you

Blue door panels are trashed, metal panels were so rusty no screws were actually holding the panels to the doors. Sorry

blap	01-15-2021 09:46 AM

Re: 1969 CST/10 Part Out 4x4

Yes I'm interested

Crjpiolt

01-16-2021 01:15 AM

Re: 1969 CST/10 Part Out 4x4

I might be interested in the frame depending on the condition and price. Thanks, Bill

Leigh222

01-16-2021 09:27 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Crjpiolt (Post 8864806)

I might be interested in the frame depending on the condition and price. Thanks, Bill

Once I get the cab off I'll post some pictures and you can have first dibs.

C10_ForDad

01-16-2021 05:51 PM

Re: 1969 CST/10 Part Out 4x4

Is the headlight and front turn signal harness complete?

Thank you

C10_ForDad

01-16-2021 06:11 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by C10_ForDad (Post 8865095)

Is the headlight and front turn signal harness complete?

Thank you

Sorry, can't figure out how to edit on mobile. I could use the headlight assemblies and grille turn signal assemblies as well.

Leigh222

01-16-2021 06:30 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by C10_ForDad (Post 8865104)

Sorry, can't figure out how to edit on mobile. I could use the headlight assemblies and grille turn signal assemblies as well.

I'll check on the harness Monday as the truck is at my work. What do you need for the headlight assembly? Buckets, trim rings?

Cash3481

01-17-2021 01:01 AM

Re: 1969 CST/10 Part Out 4x4

If you part the frame i’m looking for a 4x4 engine and transmission crossmember. Also lookingffor good front frame spring mounts.

ChevyRacefan

01-17-2021 05:58 AM

Re: 1969 CST/10 Part Out 4x4

How is the hood, is it shot at the leading edge . ?

Tripmiester

01-17-2021 09:33 AM

Re: 1969 CST/10 Part Out 4x4

How is the inner and outer grille?

Leigh222

01-17-2021 09:46 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Cash3481 (Post 8865318)

If you part the frame i’m looking for a 4x4 engine and transmission crossmember. Also lookingffor good front frame spring mounts.

Will keep that in mind.

Leigh222

01-17-2021 09:47 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by ChevyRacefan (Post 8865364)

How is the hood, is it shot at the leading edge . ?

Hood is in rough condition but I will get some pics I also have a GMC Hood that I can get some pics of as well.

Leigh222

01-17-2021 09:48 AM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Tripmiester (Post 8865400)

How is the inner and outer grille?

Grill is in decent shape inner was cut for plow controls, I'll post pics Monday.

68Custom

01-17-2021 02:13 PM

Re: 1969 CST/10 Part Out 4x4

Hello!

I am looking for a V8 clutch setup. Specifically the Z bar, ball stud with bracket on the engine, and frame bracket. Thanks!

Aaron

Stagerunner

01-17-2021 02:22 PM

Re: 1969 CST/10 Part Out 4x4

Where do the bucket seat rings go?

Leigh222

01-17-2021 02:28 PM

Re: 1969 CST/10 Part Out 4x4

Sound good aaron. I'll post pictures and price when I get them removed.

Leigh222

01-17-2021 03:03 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Stagerunner (Post 8865550)

Where do the bucket seat rings go?

They go along the back of the inside of the cab to hold the factory carpet over the gas tank. I believe a full set is 10 or 12.

C10_ForDad

01-17-2021 04:29 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by Leigh222 (Post 8865114)

I'll check on the harness Monday as the truck is at my work. What do you need for the headlight assembly? Buckets, trim rings?

Yea, I'd need everything that mounts to the core support for the lights

Leigh222

01-18-2021 03:31 PM

Re: 1969 CST/10 Part Out 4x4

5 Attachment(s)

Quote:

Originally Posted by C10_ForDad (Post 8865095)

Is the headlight and front turn signal harness complete?

Thank you

Here are the headlight assembly, turn signal assembly and wiring harness. Does $110 shipped work for all of it? Harness has some splices from plow set up but all plugs are intact except for plug into firewall.

Leigh222

01-18-2021 03:33 PM

Re: 1969 CST/10 Part Out 4x4

5 Attachment(s)

Quote:

Originally Posted by Tripmiester (Post 8865400)

How is the inner and outer grille?

Pics of Grill

Leigh222

01-18-2021 03:35 PM

Re: 1969 CST/10 Part Out 4x4

Quote:

Originally Posted by 68Custom (Post 8865541)

Hello!

I am looking for a V8 clutch setup. Specifically the Z bar, ball stud with bracket on the engine, and frame bracket. Thanks!

Aaron

Here are all parts. Back bracket bolt was seized to had to use the torch. $70 Shipped?

68Custom

01-18-2021 03:40 PM

Re: 1969 CST/10 Part Out 4x4

Picture appears to be missing?

All times are GMT -4. The time now is 08:47 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page