The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 4

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - GA 72 big block truck parting out (https://67-72chevytrucks.com/vboard/showthread.php?t=819283)

DDassow01

03-08-2021 10:43 PM

Re: 72 big block truck parting out

Looks good. I will take the mirrors.

DeadheadNM

03-08-2021 10:51 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891375)

you want the two lines that go through the floor and not the vent line correct

Just the rubber grommets for the lines, not the lines themselves. And the bolts etc that secure the gas tank in place inside the cab, and the pads the tank rests upon please.

heehawracing

03-08-2021 11:23 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by DDassow01 (Post 8891392)

Looks good. I will take the mirrors.

My paypal is heehawracing@bellsouth.net
Thanks

heehawracing

03-08-2021 11:24 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by xabichin67 (Post 8891381)

I'll Take the caps. PM me on payment method

My paypal is heehawracing@bellsouth.net
Thanks

70STOVEBOLT

03-08-2021 11:30 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891379)

good driver condition 30.00 shipped

Can I get some pics?

heehawracing

03-08-2021 11:44 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by 70STOVEBOLT (Post 8891422)

Can I get some pics?

I’ll take some in the morning

heehawracing

03-08-2021 11:46 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by DeadheadNM (Post 8891399)

Just the rubber grommets for the lines, not the lines themselves. And the bolts etc that secure the gas tank in place inside the cab, and the pads the tank rests upon please.

Ok I’m see if there good tomorrow

FL71C10

03-09-2021 12:02 AM

Re: 72 big block truck parting out

How much for the 15x8 wheels?

heehawracing

03-09-2021 12:11 AM

Re: 72 big block truck parting out

Quote:

Originally Posted by FL71C10 (Post 8891449)

How much for the 15x8 wheels?

There aftermarket 15x7

un4gvn!

03-09-2021 03:17 AM

Re: 72 big block truck parting out

Are the defrost vents on top of dash saddle in color and are they in good shape? If so, I'll take them.

FL71C10

03-09-2021 07:39 AM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891455)

There aftermarket 15x7

OK, thanks

70shortfleet

03-09-2021 11:16 AM

Re: 72 big block truck parting out

How much for the motor mounts?

heehawracing

03-09-2021 11:41 AM

Re: 72 big block truck parting out

Quote:

Originally Posted by 70shortfleet (Post 8891574)

How much for the motor mounts?

175.00 shipped for the frame engine mounts i dont have the claim shells

70shortfleet

03-09-2021 12:39 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891585)

175.00 shipped for the frame engine mounts i dont have the claim shells

I am going to pass on the mounts thanks

C101972

03-09-2021 01:34 PM

Quote:

Originally Posted by 70shortfleet (Post 8891608)

I am going to pass on the mounts thanks

Would you take $150 for the complete motor mounts? Thanks Chuck
Posted via Mobile Device

heehawracing

03-09-2021 01:47 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by C101972 (Post 8891626)

Would you take $150 for the complete motor mounts? Thanks Chuck
Posted via Mobile Device

i dont have the clam shells that bolt to the engine i have the parts that go on the frame is that what you are looking for

heehawracing

03-09-2021 01:49 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891630)

i dont have the clam shells that bolt to the engine i have the parts that go on the frame is that what you are looking for

there in the 3rd picture i posted

71CHEVYSHORTBED402

03-09-2021 01:58 PM

Re: 72 big block truck parting out

Few things I may interested in, if available:

A. Fire arrester and hose
B. Engine bay wire clips, including those on the valve cover
C. A/C system clips.
D. S duct if nice.
E. Can be talked into a box of hardware.

Thanks

C101972

03-09-2021 02:00 PM

Quote:

Originally Posted by heehawracing (Post 8891632)

there in the 3rd picture i posted

I am interested in the plates that bolt to the frame and the mounts itself. Thanks Chuck
Posted via Mobile Device

DeadheadNM

03-09-2021 02:04 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891438)

Ok I’m see if there good tomorrow

Sounds good thanks. Basically after what all is needed to bolt a tank to the cab just like GM did.

heehawracing

03-09-2021 02:22 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by C101972 (Post 8891645)

I am interested in the plates that bolt to the frame and the mounts itself. Thanks Chuck
Posted via Mobile Device

ok what i have pictured in the 3rd picture ill do 150.00 shipped

Tmend

03-09-2021 02:24 PM

Re: 72 big block truck parting out

1 Attachment(s)

I’d be interested in both ac side vent assemblies sir if available and better photos. I have an ochre dash I want to add ac too. Thanks much
Attachment 2087820

heehawracing

03-09-2021 02:27 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by Tmend (Post 8891662)

I’d be interested in both ac side vent assemblies sir if available and better photos. I have an ochre dash I want to add ac too. Thanks much
Attachment 2087820

i only have one

Tmend

03-09-2021 03:13 PM

Re: 72 big block truck parting out

Quote:

Originally Posted by heehawracing (Post 8891665)

i only have one

Is it crack free in good working order and what would you have for it shipped to 91304. Thanks much

FL71C10

03-09-2021 04:03 PM

Re: 72 big block truck parting out

Is that ashtray bolted in, or welded in? If it welded, I would be interested in the plastic glides on the dash mount for it.

All times are GMT -4. The time now is 09:20 AM.

Page 2 of 4

Show 40 post(s) from this thread on one page