Re: 90 burb (( daily dragger))
 

all new carpet/vinyl in house done
new french door's done
16' x 28' deck done
had ac duct's cleaned and serviced
will be back at it later in the week
(still have to paint a room or two this month)
update on burb chasing a leak down right now
hoping to have the rear notch in 2 weeks or so
working out all welding with one shop so checking on timing to have all done at once

Re: 90 burb (( daily dragger))
 

2 new bathroom vanity/tops/faucets
redid both flower beds out front
planted and seeded lawn twice in 2 weeks
hoping to get working on truck this weekend
honey do list is about done for this year

Re: 90 burb (( daily dragger))
 

make sure and post pics of the rear notch, i am planning mine right now and want to see what you do.

Re: 90 burb (( daily dragger))
 

hoping to cut floor out thur or fri
got side track found a cheap crew cab long bed truck
needed a DD/truck while floor is out

found some rust around inner wheel tubs but all will be cut out when the small bridge is put in

will have the plasma cutter thur-sat may cut up more stuff then :devil:
wife said dont do any thing to crew cab till the burb is back on the road:lol:

Re: 90 burb (( daily dragger))
 

I guess you won't have the burb back together by the cruise in Saturday then...


Chuck

Re: 90 burb (( daily dragger))
 

why did you wrap the outer a-arms with the metal?

Re: 90 burb (( daily dragger))
 

I had to cut th rain gutter off the arms for the 15" rallies to fit so I wrapped it with a metal band and cut it to fit had to trim about a 5/16 off keep it from rubbing
not lookin like it I let the inspection run out so I'm just going to cut the floor do a notch and bags/mount done to inspect for july

Re: 90 burb (( daily dragger))
 

http://i37.photobucket.com/albums/e9...Jun02_0004.jpg

http://i37.photobucket.com/albums/e9...Jun02_0007.jpg

http://i37.photobucket.com/albums/e9...Jun02_0006.jpg

got a early start on the weekend work

Re: 90 burb (( daily dragger))
 

nice, i thought you were going to cut it back far enough to raise the thrid seat up...

Re: 90 burb (( daily dragger))
 

I am that is all I got cut before the thunder storms rolled through all this week
it will be cut even across the back of the wheel wells and enough in the front to still fit under seat if you look at the wheel opening I have about 8" in front of the wheel well that will be filled in flat for more leg room and future speakers

Re: 90 burb (( daily dragger))
 

did you do the front arms that way so the bag can set in the hole so it will be lower? did you still use cups on the bottom of the bag?

Re: 90 burb (( daily dragger))
 

I bolted the bags to the lca's just drill a hole in the center for the bag
The d-2600 bags rubs alittle so I'm going to change to the d2500
I havent done much on the back lately rainy ever after noon and saturday at 4am I fly to La for work till friday night ordering notch and bag mounts so I can get it started saturday when I get in

Re: 90 burb (( daily dragger))
 

cool bro, thanks for the info!

Re: 90 burb (( daily dragger))
 

4 days in la I dont get where are all the custom rides are
we went to santa monica,vinice,maria del ray,sunset strip,walked hollywood blvd only 3 coolrides all week
I can wait to get back to Va I dont get the whole la thing :lol:
got some cool pics to post when home

Re: 90 burb (( daily dragger))
 

any new stuff??? wondering what you are going to do with the back?

Re: 90 burb (( daily dragger))
 

Ya we need some more pics of this thing. You have to be close to getting this thing going..

Re: 90 burb (( daily dragger))
 

the job box full of tools wont be back till friday and I need the plasma cutter to finish the floor cut out notch and tub kit should be in next friday the truck has sat since jun first hoping to finish it up by first weekend in july have to drive it to Pa for a week vacation

Re: 90 burb (( daily dragger))
 

got most every thing cut out for the notch and cover
going to a buddy house thur for some welding should have the notch in friday after noon

Re: 90 burb (( daily dragger))
 

Pics? You know that what we would be asking..

Re: 90 burb (( daily dragger))
 

I had to order another notch should be in friday if its there I'll have pic's with it in I dropped the truck off around 1 pm and dont have any new pic's

Re: 90 burb (( daily dragger))
 

which notch did you have to go with?

Re: 90 burb (( daily dragger))
 

10" 8 pc from sd it didn't should so maybe monday everything is cut and ready just need to weld in notch and figure out mounts

Re: 90 burb (( daily dragger))
 

http://i37.photobucket.com/albums/e9...ejpeg_01-1.jpg

http://i37.photobucket.com/albums/e9...magejpeg_0.jpg

got 8.5"s from bottom of frame to notch
will have better pics by wend when the bag mounts are on

Re: 90 burb (( daily dragger))
 

side note the notch is 1" narrower than the frame for the burbs
we notched the inner frame for it to work and 45'd the outer edges with a plate back to the frame

will have pic later to explain it better

Re: 90 burb (( daily dragger))
 

how much above the stock floor does the notch come?

Re: 90 burb (( daily dragger))
 

I'll get measurements tues when I start on bag mounts

Re: 90 burb (( daily dragger))
 

updates?

Re: 90 burb (( daily dragger))
 

yes bags are in measurements are in truck
will post in the am
no pic's till my desk top is back later in the week
sits level with front (with no gas,rear seat
should drop 2-3 more inches when interior/tank has gas (40 gals)
need to z front in the winter :lol:

Re: 90 burb (( daily dragger))
 

I have a teaser pic for you ok follow along as I detail all I'm having done at the welding shop this week
welded in tubs/ notch cover (removable top panel for access)
redid spare tire area for my 2 co2 bottles to fit
had my roll pan welded in
shaved: tail lights,mirrors,roof rack holes, antenna
covering up body lines in tailgate 1' from each end and mounting tag in 2" box in center of tail gate



http://i37.photobucket.com/albums/e9...Oct08_0002.jpg

Re: 90 burb (( daily dragger))
 

In post#1, your first post here, what did you do to achieve that drop?
It looks level, and low enough for me!

Im refering to the third picture, in post number 1.
You 'burb looks real good man.

Re: 90 burb (( daily dragger))
 

Do you have a pic of this?

Re: 90 burb (( daily dragger))
 

That looks sweet! We have to have better pics then this to see all that cool work!

Re: 90 burb (( daily dragger))
 

going to pic up from welding shop friday morning

Re: 90 burb (( daily dragger))
 

In post#1, your first post here, what did you do to achieve that drop?
It looks level, and low enough for me!

Im refering to the third picture, in post number 1.
You 'burb looks real good man.

Re: 90 burb (( daily dragger))
 

the 3rd pic is with the 6" flip and no over load springs ( bottomed out on frame alot) 2" of travel in rear
the front is 3" belltech spindle and a SD bag kit the height you see in pic 3 is with the front aired out sitting on inner fender wheels
also note they are 31" tires it sat about 2" high in front at that time

Re: 90 burb (( daily dragger))
 

So, thats not exactly a reccommended method? It looks real good, but if i was to do that, i'd drive it everywhere, with it being 2 inchs off the frame, im sure that destroys you after a while.

Re: 90 burb (( daily dragger))
 

LOL yea it would be ruff!

Re: 90 burb (( daily dragger))
 

http://i37.photobucket.com/albums/e9...Oct16_0002.jpg

shaved driver mirror

http://i37.photobucket.com/albums/e9...Oct16_0001.jpg

shaved tails added roll pan

http://i37.photobucket.com/albums/e9...Oct16_0003.jpg

shaved pass mirror and antenna

http://i37.photobucket.com/albums/e9...Oct16_0004.jpg

filled tailgate 1' from each end ( will round corner and add a mural later on like a jack label
nick named 80 proof

all spots are white primer with no body work yet

Re: 90 burb (( daily dragger))
 

any pics of the rear setup?

Re: 90 burb (( daily dragger))
 

I can take some after 4 today