![]() |
Re: 1965/73 Cheap Build Up
Intersting build you got going...I like your plans.
Where abouts is Hesperia ?? Obviously up North some where !!:lol: I was told it's snowing in Nevada City/Grass Valley area. Thats where my wifes grandmother lives. Curious as to why you wanted leafs, if your gonna bag it ?? |
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
Quote:
Hesperia is off the 15 fwy just north of San Bernardino. Were at 3,400 foot level. I don't care about the leafs that much. I like the way the frame rails look. There better to fab a notch. But for now I might leave the leafs. Also the 73 is a 1/2 ton with a 5 lug 12 bolt posi. One more reason is I'm using the 73 short step side bed. Anybody want to buy the Dana that came out of the 65 8 lug 3/4 ton? |
Re: 1965/73 Cheap Build Up
Here's the latest. I finished welding up the rest of the frame after lifting it up on the lift (note: I LOVE THAT LIFT) Then cutting the back of the cab so it will fit level with the frame.
This is what the cab looked like before I cut it. http://belair.smugmug.com/photos/472668422_SkrKE-L.jpg This is after http://belair.smugmug.com/photos/476448434_L4ReX-XL.jpg http://belair.smugmug.com/photos/476448380_JcjTE-XL.jpg Now it sits level. I'll mount the 65 side cab mounts so I can keep the cab nice and low. |
Re: 1965/73 Cheap Build Up
Next I swapped the 73 front 1/2 ton cross member with the suspension. Witch included the 2 1/2" dropped spindles, and disc brakes.
http://belair.smugmug.com/photos/476448524_eq7SR-L.jpg While the cross member was off I cleaned up & painted the frame, and cross member where it bolted on the frame, http://belair.smugmug.com/photos/476448555_KmtjD-L.jpg |
Re: 1965/73 Cheap Build Up
It's NOW officially a 1965 C-10 Short Bed. Even though it's half a 73
http://belair.smugmug.com/photos/476448669_4vtfq-L.jpg http://belair.smugmug.com/photos/476448591_QNTUP-L.jpg |
Re: 1965/73 Cheap Build Up
nice work!!!
|
Re: 1965/73 Cheap Build Up
Strodder:
I just read through your build thread from start to finish. Very nice, indeed. I like what you are doing. Keep us posted on your progress and thanks for sharing the numerous photos. I'll stay tuned in for this one. |
Re: 1965/73 Cheap Build Up
I cleaned up the Cragar SS wheels that came with the 73. They look pretty good. Now I need to find one 15x8 with a 4 1/2" back spacing, Or maybe I have to find 2.
This is the 16X8 in the rear. http://belair.smugmug.com/photos/476448741_uGCdw-M.jpg This is the only good 15" one in the front http://belair.smugmug.com/photos/476448706_GFymX-M.jpg They look really good. Better than I expected.:metal: |
Re: 1965/73 Cheap Build Up
Thanks you guys.
Next I will finish mounting the cab, and put the 73 bed on. Before I mount the cab I have to weld up the part that I cut, and also I had to slice the floor under the seat because the frame was hitting the bottom of the floor. I'll make 2 small tunnels to clear the frame. STAY TUNED |
Re: 1965/73 Cheap Build Up
Great job!
|
Re: 1965/73 Cheap Build Up
Coming along nicely, man....Those Cragars do look sharp !!!
Hope you find another one !! :metal: |
Re: 1965/73 Cheap Build Up
:metal:NICE,NICE,NICE,:metal:
Nice, Shop Nice, Rig Nice, Work |
Re: 1965/73 Cheap Build Up
Thanks again everybody.
I didn't work on it at all today. :( I think next I should mount the cab to the frame. I thought of cutting off the front cab mounts from the bent 73 frame and weld them on the side of the frame for the rear cab mounts. Keep checking in. |
Re: 1965/73 Cheap Build Up
Awesome job man ! Keep the pics comin
Shop is incredible :metal: |
Re: 1965/73 Cheap Build Up
I just finished the modifying back of the cab. I made 2 tunnels to cover the frame where I dropped the cab down. Then I welded up the back of the cab where I notched it.
http://belair.smugmug.com/photos/479295746_Lavac-M.jpg http://belair.smugmug.com/photos/479295837_AKTKq-M.jpg http://belair.smugmug.com/photos/479295946_RLeeZ-M.jpg http://belair.smugmug.com/photos/479295880_7hDVR-M.jpg |
Re: 1965/73 Cheap Build Up
Strodder,
I have been keeping up with your build and wanted to say thanks for the details with your post it really helps. I watch your work and can only say:metal: "WOW". :metal: keep us posted. And I really couldn't work in your shop...... I would just sit and stare at the door...:lol: |
Re: 1965/73 Cheap Build Up
Thanks Bones & Ranch.
It's a nice door..HUH I was wondering when someone would notice the posters. Here's some of the other posters I have around. Here's the door your talking about. http://belair.smugmug.com/photos/479486680_qpMsc-M.jpg This is her front. http://belair.smugmug.com/photos/479486731_LuQCK-M.jpg http://belair.smugmug.com/photos/479486875_ppmsX-M.jpg http://belair.smugmug.com/photos/479486976_iHGCq-M.jpg http://belair.smugmug.com/photos/479486928_wCtdD-M.jpg http://belair.smugmug.com/photos/479486820_JM33r-M.jpg I hope I'm not breaking any rules here by posting the posters. :new: |
Re: 1965/73 Cheap Build Up
Lookin' good, oh yeah the truck is lookin' good as well,:lol:
|
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
OK back to work. :lol: Didn't do much today. On MY truck that is. All I did was put some seam sealer on the welds, and primmer it.
http://belair.smugmug.com/photos/479622879_4Pmqv-M.jpg http://belair.smugmug.com/photos/479622918_2axKA-M.jpg |
Re: 1965/73 Cheap Build Up
Thats all you did in 8 hours???:lol:
Get out of my chair...:lol: |
Re: 1965/73 Cheap Build Up
Quote:
Actually I finished rebuilding the right side suspension on that Stude I'm also working on. I replaced the A Arm bushings, replaced the needle bearings in the King pins. Cleaned & sand blasted the left side suspension parts, and painted them. This one pays my bills. ;) I'm doing the left side today. |
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
Cool......a dual cowl induction floor pan:lol:.
|
Re: 1965/73 Cheap Build Up
All I saw where girls. You have a truck in that garage too? ;)
Nice work thanks for sharing because everytime I see things like this it tells me I'm lazy and I need to get out side and work on mine too. |
Re: 1965/73 Cheap Build Up
I rolled out the shortened frame with the cab on it so I could trial fit the bed & front end sheet metal. All I did was hang it on. Then I rolled in back in the shop & on the lift so I could make it all fit better, and make sure it all lined up. Like wheels where they belong i the middle of the wheel wells, also the cab to fender fit, and the 73 bed fitting with the 65 cab.
http://belair.smugmug.com/photos/482556297_Tjv9y-M.jpg I almost forgot. I found (2) 7X15 Cragar wheels in really good condition for $150.00. I had some used tires that I installed on them. LOOKS REALLY GOOD. :metal: http://belair.smugmug.com/photos/482556420_tqfSU-M.jpg http://belair.smugmug.com/photos/482556489_myBPT-M.jpg http://belair.smugmug.com/photos/482556256_ByQN4-M.jpg |
Re: 1965/73 Cheap Build Up
Here's how it looks now with it shimmed up, aligned & bolted up. I wish I could roll it outside again for a better picture, but the friends are gone now. It's still just temporary. I had to do it so I could sleep at night. I was worried if I measured correctly. AND I DID!!!:metal: Now all the body lines line up, and everything fits perfect. I had some friends over to help lift it all on. That's why I did it now and not later, but I'm glad I did. Like I said, now I can sleep good knowing that there wouldn't be any problems with the fit. I love the way the 73 Bed looks with the 65 Cab. So far I'm real happy with the way it's coming out.
http://belair.smugmug.com/photos/482556542_P5N5p-L.jpg |
Re: 1965/73 Cheap Build Up
I'd be happy too. Your doing a great job. :metal:Wish I could make great strides like you. Just not able to stay in the shop that long lately. Now go get a good nights rest.
|
Re: 1965/73 Cheap Build Up
Thanks Allan. It's all coming apart again to do more frame clean up, fire wall holes, install power steering box, and column. Not to mention the engine & trans.
It's time to watch TV now. It's only 8:15 PM here. I'm not that old yet. :lol: |
Re: 1965/73 Cheap Build Up
cool!
i'm actually pleasantly surprised, that bed looks good on there!! |
Re: 1965/73 Cheap Build Up
NO WORK TODAY. :waah:
|
Re: 1965/73 Cheap Build Up
Lookin good!
Nice shop! |
Re: 1965/73 Cheap Build Up
Thanks Joey.
|
Re: 1965/73 Cheap Build Up
I went to Pick A Part today and got a seat from a 91 Chevy truck, and a gas tank from a 77 Blazer. What a ***** it was getting the gas tank out. Everything was rusted, and no air tools. It took me 3 hours to get just the tank out. The seat fits with out any modification. It sits flat on the floor, and looks just about the right height. A lot of work but worth the $50.00 for the seat & $80.00 for the rest. Another score!! :metal:
http://belair.smugmug.com/photos/485912086_dApbT-M.jpg http://belair.smugmug.com/photos/485912158_N9nLY-M.jpg http://belair.smugmug.com/photos/485912219_SaVDp-M.jpg http://belair.smugmug.com/photos/485912297_edAsJ-M.jpg The tank has a hole in it. That's how a Junk Yard empty the gas tanks. No biggy, I'll just weld it up. I got the tank with the sender/pump, and the rock shield too. http://belair.smugmug.com/photos/485912363_3MD4c-M.jpg |
Re: 1965/73 Cheap Build Up
Man, you took the fun out of it.:lol::lol: You need to put some seats in like mine.;) That seat does fit good that you got today. You gonna run lap belts or ??? Like you said great score.:metal:
|
Re: 1965/73 Cheap Build Up
Nice Score!!
how are you going to clear the tank of fumes before you weld it? |
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
There was a guy at the shop my dad worked at years ago. He had a gas tank that needed to be welded. He set it on top of a 2 inch steel bench, crawled under the bench, lit the torch, and waived it in front of the fill neck. :lol:
When the tank fell from the ceiling back onto the bench he had no fumes left in it. You can inert the tank by filling it with CO2 or Argon gas. That should flush all the gas fumes out, but still be careful. |
All times are GMT -4. The time now is 12:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com