Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
During the last week I've been moving forward with the chassis. When temps are cool in the morning I've been smoothing the frame, and in the afternoon I've been shooting primer, color & clear:
http://images2.snapfish.com/23232323...32393254ot1lsi http://images2.snapfish.com/23232323...32393254ot1lsi I had thought about accenting all the bronze with black leaf springs, but the more I think about it the more I'm tending to all bronze underneath with just a splash of bling like stainless lines, aluminum rear end cover, aluminum trans pan, polished exhaust, etc. I haven't decided yet on just a galvanized gas tank or making it color too. What do you guys think? |
Re: Bob's Retirement Build - My '55 TF
That looks real nice.
Kim |
Re: Bob's Retirement Build - My '55 TF
Quote:
Oops, I just realized I posted the same pic twice. Here's the other one... http://images2.snapfish.com/23232323...29%3B345nu0mrj |
Re: Bob's Retirement Build - My '55 TF
looks great!!
|
Re: Bob's Retirement Build - My '55 TF
Quote:
I did put the last of the All Metal in the deeper pockets in the frame this evening. The wife is playing cards tomorrow, so it's a garage day. I'll be working on smoothing the frame and preparing it for high-solids (2K) primer. If I'm lucky I could shoot that around 5 o'clock tomorrow. |
Re: Bob's Retirement Build - My '55 TF
I think gloss black accents would look real nice.
Kim |
Re: Bob's Retirement Build - My '55 TF
Really nice looking build so far
|
Re: Bob's Retirement Build - My '55 TF
Thanks phaus. You've inspired me to do an update. I've been lovin' on the frame for about 12 or 13 days. Here it is after Kirker primer, some fill with all-metal in the deep spots, and a first round of spot work...
http://images2.snapfish.com/23232323...%3C95254ot1lsi Now in U-Pol high solids primer with an orange guide coat... http://images2.snapfish.com/23232323...53958254ot1lsi Here's a tip (but the pros will think I'm crazy). Spot filler dries pretty quickly, so before I mix the filler I go around the car with a scissors and a roll of tape, marking defects with pointers, as shown here. This allows me to find the problem areas very quickly, usually doubling the amount of spots I can fill with a mix of mud. http://images2.snapfish.com/23232323...53956254ot1lsi I have also found some cheap bondo at the local flea markets that I use for light spot fill. At $12-$14 dollars a gallon, I highly recommend this stuff for light skim & fill. http://images2.snapfish.com/23232323...54553345nu0mrj Finally, the painted frame, sporting the final truck color. I think I got a little carried away with eliminating all unused holes and the pockets that were there originally, but it is what it is... http://images2.snapfish.com/23232323...86%3B254ot1lsi http://images2.snapfish.com/23232323...95%3A254ot1lsi I skipped a few steps like the other high solids primer spray with the black guide coat and a round or two of spot fill, but you get the idea. |
Re: Bob's Retirement Build - My '55 TF
wow. what a nerd :D
filler and block sanding your frame :D:D:D does look good doesn't it |
Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
That is one nice looking frame.
Kim |
Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
I am guessing that you were sitting on quite a few progress pictures then. I love the work on the frame.
|
Re: Bob's Retirement Build - My '55 TF
Quote:
This is an early shot of the surgery in prep for boxing the frame: http://images2.snapfish.com/23232323...3C679345nu0mrj The boxing itself was a breeze, thanks to my local scrap yard. They had nominal 6"x3/16" strapping that was the exact dimension needed. I just had to trim it where the frame narrowed at the front: http://images2.snapfish.com/23232323...97675345nu0mrj Here are a couple of pictures cutting the C-notches for the rack & pinion. Note that I don't have a plasma cutter, so the ol' acetylene has to do: http://images2.snapfish.com/23232323...5%3C8345nu0mrj Here's the insert, half welded in. The slag cleaned up really quickly with the edge of a worn 4" grinding wheel: http://images2.snapfish.com/23232323...4%3C7345nu0mrj |
Re: Bob's Retirement Build - My '55 TF
WOW! Don't know how I missed this one. Frame looks great!
|
Re: Bob's Retirement Build - My '55 TF
Quote:
Right now though, while the weather is holding I'm sand blasting panels. The driver's door was yesterday and the other will be tomorrow if things dry up here. I primered the one door today before the wife socialized me for a few hours. I'm home now, cruisin' Ebay for 3M PPS cups and such. I recently scored a Sata Jet 3000 B HVLP (1.3 tip) for a great price, so cups are next. Has anyone tried that PPS system? I can't imagine how it will be with shooting paint with the gun completely inverted! Here's a 3M video to show how they work: |
Re: Bob's Retirement Build - My '55 TF
I got a fair amount done during the last month, but it's going to be 7 degrees in the morning so progress has stopped. (It actually stopped about 10 days ago when the snow started flying.) The chassis is now assembled enough to roll around. Planning and pre-assembly really paid off and allowed me to have all the holes drilled before paint. The only (known) mistake involved the e-brake rear cables. They were good to go until I boxed the frame. During assembly I had to notch the boxing to give them access. That's what they make touch-up brushes for!
Here's the chassis, ready to "land" for the final time. The rusty Cragars and 30-year-old bias-ply tires are just to roll it around: http://images2.snapfish.com/23232323...B%3B4254ot1lsi And finally on the ground: http://images2.snapfish.com/23232323...A8%3B254ot1lsi |
Re: Bob's Retirement Build - My '55 TF
The screamin' zonker yellow fenders I bought from my buddy also got a little TLC. These had been painted yellow both sides and looked like they were ready to bolt on if my truck was going to be yellow. They definitely had no patch panels. I blasted the inside first in hopes of just a scuff and shoot on the outside. As I did I noticed that the PO (or more likely his/her painter) had painted over a lot of grease and rust. Hmmm...
As I progressed, I noticed the filled holes had been brazed, so that had to go as well. I primered the underside: http://images2.snapfish.com/23232323...7%3B8254ot1lsi ...and began to remove the yellow on the outside, 80 grit to start... http://images2.snapfish.com/23232323...%3C28254ot1lsi Then 180 grit: http://images2.snapfish.com/23232323...3A%3B254ot1lsi But as I progressed I noticed crud under the paint there as well, first at the antenna hole, then at the park light, then everywhere: http://images2.snapfish.com/23232323...99%3C254ot1lsi It was time to sandblast to bare metal. I'm glad I did, because there was a lot of bondo material -- a few places where the bulild-up was 1/4", but the bare fender appeared fine. Then the braze was drilled out with a uni-bit (step drill)... http://images2.snapfish.com/23232323...47858254ot1lsi ...and welded. Here's how I use washers to minimize the work: http://images2.snapfish.com/23232323...76%3B345nu0mrj http://images2.snapfish.com/23232323...9%3A4254ot1lsi http://images2.snapfish.com/23232323...47865254ot1lsi (Oops. forgot to take a pic of the 1/4" hole after filling, but you get the idea.) ...and the filled holes: http://images2.snapfish.com/23232323...8%3B5254ot1lsi Next will be primer. Waiting for higher temps, and the garage is bone dry. |
Re: Bob's Retirement Build - My '55 TF
While waiting for a really late indian summer (native American summer?), I decided to scrape the crud off of the underside of the cab. Up on the rotisserie it went, and I got out the Harbor Freight power scraper again. I don't know why I can't find the picture of the crud. I know I too it.
Anyway, here's the 'blasted underbelly: http://images2.snapfish.com/23232323...47877254ot1lsi This really cleaned things up for final welding. Here's the big slot for the steering column, dressed for a dedicated install: http://images2.snapfish.com/23232323...77%3A345nu0mrj |
Re: Bob's Retirement Build - My '55 TF
Nice work Bob!!
|
Re: Bob's Retirement Build - My '55 TF
The frame came out real nice.
Everything else looks good also. What is this harbor freight scraper that did such a nice job on the cab bottom? Kim |
Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
Quote:
http://www.harborfreight.com/6-piece...kit-95826.html It goes on sale, and the 25% coupons (for any one item) are floating around. I used it on the frame too. It makes short work of old undercoating too as long as it's not gooey. |
Re: Bob's Retirement Build - My '55 TF
Quote:
resistance is futile :D |
Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
Quote:
I may have to pick one of those up for the bottom of my cab. Kim |
Re: Bob's Retirement Build - My '55 TF
Loving the build
|
Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
Nice work
|
Re: Bob's Retirement Build - My '55 TF
Quote:
I can't believe how wounded I am without the compressor. I want to grind some welds but... I want to polish the intake but... I want to power scrape the gunk off of the underside of the roof but... I want to do a little body fill but... I'd like to shoot a little primer on the bare fenders but... It's depressing! |
Re: Bob's Retirement Build - My '55 TF
I fixed my compressor about 3 weeks ago. The Leeson motor appears to be great! American-made!
Had another use for that HF power scraper - the roof interior: http://images2.snapfish.com/23232323...72683254ot1lsi With that done I'm ready for final blast of the cab. If only the weather would cooperate. |
Re: Bob's Retirement Build - My '55 TF
I guess I'll put this segment in here. I'm not sure this will end up as part of the truck. When I started this mini-project I was planning to hang the finished product in the basement as a decoration. Since it may actually go on the truck, here we go...
I bought a 6-deuce manifold with 2 Holley 94 carbs in 1981. That same year I bought 7 more Holley 94s, mostly at the old Indianapolis Motor Speedway infield swap meet - for 5 bucks each. I'd find them, then tell the vendor I was paying 5 bucks. Some vendors bit and some didn't. Since I finally found a pretty effective way to "home-brew" the buffing, I thought I'd share it. I'm holed up in the basement due to the weather so I thought I'd pull this thing out again. 2 years ago I started fiddling with the manifold. After sandblast I started grinding on it with carbide bits and 80-grit sanding rolls - to the extent that I completely removed the "Offenhauser" and logo off of it because they would be hard to buff. Care had to be taken to avoid grooves and gouges, particularly near areas like where the carbs bolt on. Here's the manifold in early January, after about 40 hours of work over the years: http://images2.snapfish.com/23232323...%3B87254ot1lsi I must have quit on it 5 times, each time ending in disappointment. There are a lot of nooks and crannies in this beast, and I wasn't sure how to polish all the nooks (or the crannies! :)). Then I made this wonderful tool for the pockets, that I call the "Flapper": http://images2.snapfish.com/23232323...66%3B254ot1lsi It's just a piece of 1/4" rod with a slot. I used a very thin abrasive wheel to cut the slot. It will hold about any grit wet-or-dry paper, like this: http://images2.snapfish.com/23232323...A3%3C254ot1lsi I cut the paper about 1/2" longer than the slot, double it if it's too thin for the slot, put the rod in my die grinder, spin slowly to roll the paper, dip it in water, then have at it. The cool part is that the paper wads up on the tip, protecting the aluminum from the rod (until the paper wears out) while massaging the nooks of the manifold. I would block the flat surfaces using a tongue depressor or popsicle stick. I used 100 grit, then 220, 320, 400, 600, 800, 1000. It takes a long time with the 100 grit, to get the 80-grit scratches and other imperfections out. By the time you get to 600 you're spending about 4-6 hours with each grit to hit the whole manifold. After the 1000 grit I switched to buffing compounds. Emery (black), then Tripoli (brown), then white rouge buffing compounds using a variety of buffs: http://images2.snapfish.com/23232323...%3A39254ot1lsi The primary tool with compounding was the felt bob. You can see 2 of them nearest the Dremel tool in the pic above. They start out barrel-shaped and I form the point by spinning them against a coarse grinding wheel. I bought 14 of them for about a buck apiece on the web. Unfortunately, the felt bobs leave swirls in the finish. After compounding I tried several things but just couldn't get the mirror finish. Then I went to Simichrome... http://images2.snapfish.com/23232323...%3A43254ot1lsi ...and used an old t-shirt in the flapper. I doubled the fabric, and used the edge (hem?) of the shirt on the point of the rod because it was thicker and it held in the slot: http://images2.snapfish.com/23232323...66%3C254ot1lsi Here's the t-shirt setup after about an hour of use. It really holds up: http://images2.snapfish.com/23232323...A3%3B254ot1lsi I combined the flapper work with a 3" cloth wheel (shown above), and a soft cotton mushroom buff (also shown earlier). The final touch is a hand buff with Simichrome and the t-shirt. The shirt works better than my microfiber towels, and once you use Simichrome on anything, you'll never go back to Meguire's or Mothers. Simichrome isn't cheap at $8 a small tube, or just under $60 for the 60-oz. can in the pic, but it's worth it. Those Germans know what they're doing! During the final buffing steps you'll find scratches that need a touch-up. I went to the 1000 grit to take them out, then straight to the Simichrome, which will remove the 1000-grit scratches in a small area. Here's where I am now: http://images2.snapfish.com/23232323...75668254ot1lsi I'll post a finished pic when I get the carbs on there. Also, if someone has better tips, please help out - even if I did something wrong or wasted my time. I searched the web for days trying to find pointers on doing nooks and crannies, and all of the YouTube stuff, etc., worked on nice flat pieces. |
Re: Bob's Retirement Build - My '55 TF
Very nice work.
Kim |
Re: Bob's Retirement Build - My '55 TF
I would say your labor paid off very nice.
Rich my build' http://67-72chevytrucks.com/vboard/a...1&d=1378859745 |
Re: Bob's Retirement Build - My '55 TF
Quote:
|
Re: Bob's Retirement Build - My '55 TF
I have used the same idea as your slot in the rod but I use a 1/2 or 7/16 hardwood dowel with a slot cut in the dowel and emery cloth , works pretty good too. can't wait to see it with all the carbs.
Rich |
Re: Bob's Retirement Build - My '55 TF
1 Attachment(s)
Quote:
All 9 carbs are cleaned up but disassembled and the six best ones have new shafts. I would have liked to chrome them but it was too much $$s. I painted them silver with ceramic paint (poof can). I also bought kits and new stainless screws for them. If I actually use this setup I'll have to decide if I want to run off of just two carbs or all six. Then I'll have to buy the appropriate power valves, linkage, fuel lines and air cleaners. We'll see. If you're really bored you can look at the attached spreadsheet to see the hodge-podge of 94s I'm working with... |
Re: Bob's Retirement Build - My '55 TF
HOw did I miss this? You do really nice work!
|
Re: Bob's Retirement Build - My '55 TF
Quote:
Hey, I'm in the middle of checking out "Boppa's Truck". Nice work yourself! |
All times are GMT -4. The time now is 07:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com