Re: Another Blue Chevy
5 Attachment(s)
Before and after pics.
|
Re: Another Blue Chevy
5 Attachment(s)
More before and after pics.
|
Re: Another Blue Chevy
Is she purring yet?
|
Re: Another Blue Chevy
5 Attachment(s)
Yep. Yesterday finished removing the old fuel tank. A few things about the old tank that made me want to replace it. The filler neck and the JB Weld around the outlet were the first reasons but after getting it out I see a rip in the top repaired ... again with JB Weld. I replaced it with a poly tank from Tanks inc. I used a filler neck from an 88 C10 and ran 3/8" steel line to the front.
|
Re: Another Blue Chevy
5 Attachment(s)
New fuel tank and lines.
|
Re: Another Blue Chevy
5 Attachment(s)
...Still need to wire the electric choke .Shouldn't need it for now.
|
Re: Another Blue Chevy
Safety and reliability repairs is a first step in the right direction. That thing is so complete. People scoff at "older amature restorations". Let them, I'll take it! It's a great way to buy a complete truck ready for your hands wile not giving top dollar. Plus, you can always just drive the doggone thing. If restoration is your desire... it's whenever you decide it's time
|
Looking Good !
Is that a Chinese made Rochester BC copy ? .
It looks nice and the auto choke is a good up grade too . I have a similar set up on my '69's 250 CID engine, I still use the stock Rochester carby as the throttle shaft wasn't worn out . You'll soon by cruising and styling . |
Re: Looking Good !
Quote:
|
Re: Another Blue Chevy
Quote:
|
Vintage Brakes
We used to call then 'Push And Pray' brakes.....
DO NOT turn the drums ! . even if ripped up . Once you go through it all and replace the linings, loose bushings and so on, adjust each 90 degree linkage so it's *just*approaching 90 degrees as the shoes begin to take up . More than 90 degrees and the brakes will e very grabby and uneven, less than 90 degrees and they'll be very poor and the pedal will have too much travel . Begin adjusting at each backing plate and slowly and carfully work your way to the brake pedal last . |
Re: Vintage Brakes
Quote:
|
Useless Information....
And to think during my entire career I was told repeatedly " NO ONE is ever going to care about those old junkers you love so much !" .
|
Re: Another Blue Chevy
1 Attachment(s)
Quote:
|
Re: Another Blue Chevy
I posted a question in the engine forum . I was hoping to find what years gm trucks and cars had the linkage I want to use. . . .http://67-72chevytrucks.com/vboard/s...d.php?t=805707. . . . the pictures I posted there are a Pickup and a 1 series Camaro I think.
|
Re: Another Blue Chevy
1 Attachment(s)
...another view of the linkage I need.
|
Re: Another Blue Chevy
4 Attachment(s)
Haven't posted in couple weeks.( OK a month and a half) This first pic is the pushrod I replaced and third and forth are the pedal and cable assy I'm using right now. I may have found the gm parts I,m looking for(see second pic).
|
Re: Another Blue Chevy
5 Attachment(s)
I've gotten a few things done over the last two months . Although we missed out on some carshows I've also been able to take it to a couple of the local car club nights. I'll post up a few pics. I also stopped for a photo op under a US and Chevy Flags
|
Re: Another Blue Chevy
4 Attachment(s)
...;) and a stop at the Best apple orchard around.
|
Re: Another Blue Chevy
Good to see you enjoying the truck. That thing is so cool. Must be a gas to drive.
|
Re: Another Blue Chevy
It takes three hands and you need an appointment to stop. But, Yeah ...it's a blast.
|
Funky Brakes
Sadly, the Huck (rhymes with "SUCK") brakes fitted from 1937 ~ 1950 (? '51 ?) weren't much better, I feel your pain .
|
Re: Funky Brakes
Quote:
The part about "making an appointment to stop" came from an episode of Jay Leno. |
Re: Another Blue Chevy
1 Attachment(s)
I was able to locate the gm linkage I wanted for my throttle assy. and got it installed Today.
|
Re: Another Blue Chevy
Looks,good. Cable is always easier and more forgiving.
|
Re: Another Blue Chevy
5 Attachment(s)
...Been a few months since I posted on this thread . So much has happened, The end of June I was hearing a noise in the drive train. After some researching when it would make the most noise. I narrowed it down to the transmission front bearing retainer was broken. After removing the transmission, further examination showed the main drive gear and adjoining main shaft cluster were trashed
...As I was taking things apart I realized a trans mount without any rubber contributed to the broken pieces and rebuilt mine after no luck finding another. ...I found new pieces to fix the transmission, but I also found a used transmission on Ebay in Minnesota . I ordered it and received the trans on Aug 31st. ...That day I was repainting the house after already repairing broken windows from a recent hail storm. My Wife said the house can wait "fix the '35" . So I could get it put up. I dropped everything got the transmissions pieced together and installed and have been driving it almost every weekend since . ...First thing we had to do was take it by my Mother In Law to show her since she is the one that bought it for us . ...I will try to post up pictures in the order they happened. It's been 4 months and I got rid of my flip phone so I can ZOOM with my 3 yr old grandson and his parents.So I have lots of pictures. |
Re: Another Blue Chevy
5 Attachment(s)
...July 23 I thought I would pull the trans real quick. ...HaHa...
...By Aug 13th I had realized I wasn't going to get this done inside my 8'x20' CONEX because I was going to have to move the rear axle back so the torque tube would be out of the way to pull the transmission back and out through the top. So I set up an awning to work under. ...Aug 17 I got the trans out....WHEW!!! ...At that point the bad news. It was the beginning of the search. ...then the Ebay listing for a complete trans popped up , correspondence took place and the purchase was made.:) |
Re: Another Blue Chevy
5 Attachment(s)
...9-1 I took the best of the two trans and set up a makeshift bench to work on it ... 9-2 Tested all the functions before setting it back in all clean and purdy on 9-6 and put the flooring back in and covered that by carpet.
|
Re: Another Blue Chevy
5 Attachment(s)
...Put the mats back in and backed it into the CONEX to take down the awning and pick up my tools. ...I kept it under double cover while I waited for parts and worked on the transmission ...9-7 I took it out for day 2 test drive. ...9-13 I took My Wife out for a Sunday drive.
|
Re: Another Blue Chevy
5 Attachment(s)
...9-15 Tuesday night Car Club meeting. ...9-18 Friday Night Florence Museum Awareness ...9-22 Tuesday night club meet
|
Re: Another Blue Chevy
5 Attachment(s)
....9-29 Tuesday night ... 10-6 Better visit with day old grand daughter... 10-13 Back to Tuesday with the guys...10-20 Last Tuesday meeting because of inclimate weather on the 27th. We start back up after the time change in the spring. ...And I just had to stop by the :chevy: Dealer to get a picture with a new truck.
|
Re: Another Blue Chevy
2 Attachment(s)
And to just keep the theme going I brought home "Another Blue Chevy"('71 C10) on 10-18. made a few improvements already ...but that's another story.
|
Re: Another Blue Chevy
Love the look of the 35 and glad you got it back on the road to enjoy.
|
Re: Another Blue Chevy
Nice job on the trans and getting it back up and running.
|
Re: Another Blue Chevy
2 Attachment(s)
Quote:
Quote:
|
Re: Another Blue Chevy
3 Attachment(s)
I got the stock lights apart and tried some metal polish with a gray scotchbrite and a blue shop towel . Amazingly just hand rubbing turned out well . I also replaced the passenger side lens with a Chevrolet part I found on Ebay. I have some ideas for a light socket replacement and may try a LED version of an 1157 bulb, not sure.
|
Re: Another Blue Chevy
1 Attachment(s)
I bought a pair of these light sockets . I think they will work fine for a double contact bulb.
|
Progress !
NEED MORE TRANNY & PARTS PICTURES ! .
I remember doing to 'mix 'N match on vintage trannies from the 1960's through the 1990's, it's fun and rewarding bench work . In particular I'd like to see the gear teeth, slider and countershaft gears . It's very nice you took it to mother in law =8-) . Congratulations on the grand daughter ! . Is it your first ? . |
Re: Progress !
1 Attachment(s)
Quote:
|
Family Comes FIRST !
1 Attachment(s)
Thank you, great photos .
I love spending time with my grand kids and great grandson.... Attachment 2062641 Here they are in Arizona recently . |
All times are GMT -4. The time now is 03:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com