Re: The Snortin' bull
1 Attachment(s)
The carb B Grant Speed demon, tuned to the engine,Accel hei dist. Recurved for this engine .Tuning from a local long time shop. www.mathewsonsautomotive.com
|
Re: The Snortin' bull
1 Attachment(s)
100 amp one wire alternator. Trailgear auxillary battery holder to mount in rear of truck. A new gm filter assy. Still available since 1960.
|
Re: The Snortin' bull
1 Attachment(s)
Thank's Captain fab. Fitment is great on the booster bracket.
|
Re: The Snortin' bull
Nice to see another 1960 GMC on the forum. There are too many of us.
|
Re: The Snortin' bull
nice progress and great looking project!!
|
Re: The Snortin' bull
Thanks for the compliment.
Quote:
|
Re: The Snortin' bull
Thanks .do not see many snout trucks out there.
Quote:
|
Re: The Snortin' bull
2 Attachment(s)
Master cylinder and booster done and mated to original pedal swing inside.
|
Re: The Snortin' bull
1 Attachment(s)
Some cross bracing and bed floor support for bed and frame. Nothing fancy.
|
Re: The Snortin' bull
1 Attachment(s)
Small block chev 400 mated to 700r4. Ready to move into there new home.
|
Re: The Snortin' bull
1 Attachment(s)
Powertrain in between the rails, now time to correct past poorly located engine mount brackets and install trans c- member.
|
Re: The Snortin' bull
1 Attachment(s)
Brake line tab's on frt frame rail's.simple but important.
|
Re: The Snortin' bull
Been metal patching the original shifter hole in the high hump,fab in and weld in reinforcement gusset's into rear frame kick up this past week.Post some current pic's soon.
|
Re: The Snortin' bull
2 Attachment(s)
crossmember modded to fit on x frame and installed, new engine mounts installed.
|
Re: The Snortin' bull
2 Attachment(s)
Added gusset plate's to rear kickup area of frame.finished the high hump will put in new floor shifter hole when shifter come's.
|
Re: The Snortin' bull
1 Attachment(s)
All smile's in gettin' some sun.
|
Re: The Snortin' bull
1 Attachment(s)
Insulating the cab. Heat and cold in Seattle area change's constantly.
|
Re: The Snortin' bull
2 Attachment(s)
Mounted rear bags on fab'd in mount's.Viaair 400 compressors and tank.May switch to dual tanks though due to interference when truck is layed down.Mounted auxillary battery rack also this day.
|
Re: The Snortin' bull
1 Attachment(s)
It was a hot warm day,perfect for refitting the seat upholstery and a good cleaning.Painted the frame work and track's on the original bench seat.
|
Re: The Snortin' bull
2 Attachment(s)
Fitting the LMC replacement floor mat .It has plenty of extra material for trimming. On the dimmer switch is the rubber cover from early starter motor floor mount switche's.I did buff off the chev emblem in the center since it is now in my GMC.
|
Re: The Snortin' bull
1 Attachment(s)
Accuair speedswitch installed and setup.the Bull has some lung's.Alot easier than manually trying to air up.
|
Re: The Snortin' bull
1 Attachment(s)
Fabrication of a mount for accuair control's.
|
Re: The Snortin' bull
2 Attachment(s)
fuel pump installed. started some plumbing for engine.carb installed.modified original throttle pedal pivot and lever.fabricated throttle linkage and safety return springs.oil line for guage pack installed.
|
Re: The Snortin' bull
started plumbing for brakes.on a full bagged suspension alot can go into how not pinch or interfere with anything when the suspension has some much travel.
|
Re: The Snortin' bull
1 Attachment(s)
initial rear line to hose starting to mock up.
|
Re: The Snortin' bull
1 Attachment(s)
no fancy leather headliner here.Just natural patina.
|
Re: The Snortin' bull
3 Attachment(s)
The shifter I wanted to appear almost as original.I decided to try an American Shifter. So far so good. Well made and came with plenty of parts.It is a dual action also .Instead of a push down center button you just lever it to the side a bit to shift .
|
Re: The Snortin' bull
Love the GMC grille! The shifter looks good to. You are making a lot of progress.
|
Re: The Snortin' bull
Thanks for the compliment. been hustling lately trying to get on the road.
Quote:
|
Re: The Snortin' bull
1 Attachment(s)
Try to find a decent pair of these GMC sill plate's.
|
Re: The Snortin' bull
3 Attachment(s)
Rear brake line plumbing.Front brake line plumbing all fab'd and installed.Got a Champion radiator .Great fit and great price $ . 4 core aluminum.
|
Re: The Snortin' bull
3 Attachment(s)
Engine side view of Champion radiator.Some rh side brake line plumbing and fuel plumbing.Fab'd an adapter harness to the original 1960 turn signal to plug into the american autowire harness.
|
Re: The Snortin' bull
2 Attachment(s)
It's been month's since inner fender's have been on.Sorry the heat and a bit of humidity mess'n with camera some of the pic's appear foggy. In the end a derelict looking triuck is the look.
|
Re: The Snortin' bull
3 Attachment(s)
Got the inner fender's back in.These have been trimmed to fit the frt modded frame and aligned to core support. Set bed gap tight with a little clearance as stock frame is gone and no flex is going to occur.I think this look's good. Even though the truck is to look like a derelict old truck on the side of the road in the end trying to get the panel's looking good and fitted.
|
Re: The Snortin' bull
2 Attachment(s)
Cleaned up some fresh paint on inner fenders.Hood hinges on.Hood latch pin bracket on.Powder coated these and hood latch assembly.
|
Re: The Snortin' bull
2 Attachment(s)
Welded up multiple's holes from old west coast style mirror's .a little clean up job.
|
Re: The Snortin' bull
2 Attachment(s)
hole's gone.Bed side's next.
|
Re: The Snortin' bull
1 Attachment(s)
Fitted radiator hose's
|
Re: The Snortin' bull
3 Attachment(s)
some power steering plumbing routed and in place. These loom's are nice for plug wire's from Made For You product's.
|
Re: The Snortin' bull
1 Attachment(s)
The Bull patiently waiting to come out and play.
|
All times are GMT -4. The time now is 05:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com