Re: Regarding Small Step-Vans Custom or Stock
 

Here's a (quickly made) photoshopped picture of what I kinda want it to look like....maybe lifted a little higher :) Not too shabby.

http://i188.photobucket.com/albums/z...3122ikklll.jpg

Re: Regarding Small Step-Vans Custom or Stock
 

I know nothing about those besides what they look like. It's at least a 1 or like 1 1/2 ton right? You have to consider the weight, steering, axle width, crossmember clearances, trans, and transfer case. New drivelines, brake lines, maybe exhaust, and all that fun extra stuff. From what I see you would have to lift it for sure. What James did to his would be simple by comparison. I'm not trying to sound negative or discouraging, just by looking at the pics it looks pretty involded.

Other guys on here that own them or at least familiar with them will be way more help about that than I am.

Re: Regarding Small Step-Vans Custom or Stock
 

Yeah, I figure it's not gonna be as easy as it looks.....but definitely will be one bad a** Step van when finished. :}

Re: Regarding Small Step-Vans Custom or Stock
 

If you could get that to work that would be pretty cool, I'd drive it. (just different KC light covers)

lol Oh, and need to have the whole bumper match... :lol: (drivers side)

Re: Regarding Small Step-Vans Custom or Stock
 

Funny.....yeah the picture I cropped the bumper from had some light reflecting on it....oooopsie!

Re: Regarding Small Step-Vans Custom or Stock
 

No problem, just giving you a hard time is all.

Welcome to the site though!!

Re: Regarding Small Step-Vans Custom or Stock
 

Thanks!!!!

Re: Regarding Small Step-Vans Custom or Stock
 

yea got 1 or to of them doing a burnout

Re: Regarding Small Step-Vans Custom or Stock
 

Does anyone know where to get aluminum body panel parts for the grumman olson step van bodies. I bought a p10 step van this week and i flipped it getting it home in the snow. I need the windshield sheet metal . Can anyone help me

Re: Regarding Small Step-Vans Custom or Stock
 

Wow that sucks....sorry to hear that. Here's a good website for step van ,etc parts. http://www.stepvanparts.com/gm_p30_chassis_p1.htm
I've ordered numerous parts from them and they ship very fast.
Hopefully this helps. Worst case....if they don't have the parts ya need....call them and ask if they know who would. I talked to them a couple times and they seem very nice.
By the way.......ya got any pics???? I'd be curious to see the damage.

Re: Regarding Small Step-Vans Custom or Stock
 

I will try to get some pics up

Re: Regarding Small Step-Vans Custom or Stock
 

Hard to belive this rolled onto the driver side.

Re: Regarding Small Step-Vans Custom or Stock
 

Here are some work in progress pictures of a 1968 Chevy P10 Step Van that I bought from Eddie Wood back in August of 2010. Engine and transmission all rebuild. Front Bumper straigtened and chromed along with chorming the front grill. All new glass is ordered and all metal work is complete. Going to soda blaster next week then all new 2-tone paint job. Purchased custom made concession window on EBAY and installed. This truck will be used for HVAC repair work and advertising for the business.:chevy:

Re: Regarding Small Step-Vans Custom or Stock
 

All real nice. I just found someting else to shop for. I't will be ok. The wife already knows I'm easily addicted.

Re:1968 P10 Chevy Step Van Progress
 

Today the soda Blasting started I wll continue to update as it progresses:devil::chevy:

Re: Regarding Small Step-Vans Custom or Stock
 

im liking the way they look

Re: Regarding Small Step-Vans Custom or Stock
 

damn.....well it looks fixable. Could be a sweet little step van! =):metal:

Re: Regarding Small Step-Vans Custom or Stock
 

It has been fixed. If you look real close, all the metal work is complete and all rusty areas re-built to original condition. I have spent hours looking thru Texas junk yards finding all the original emblems,tailights turn lights and side markers. I had a bulkhead installed behind the drivers seat and the entire bed will be soda blasted then bedliner sprayed on the floor and then covered with diamond plate. Upgraded 230 motor to a 255 by adding new RV cam and going 40 over with the cylinders and rebuilt the 350 tranny. Power steering will be added before we go back in with the engine and I am in the process of locating all the components for air conditioning the cab. Stay tuned for the updates. The metamorphis will happen in the next couple of months depending in the weather here in Texas.:flagw::c2::chevy:

Re: Regarding Small Step-Vans Custom or Stock
 

I have a guy that can fix really cheap and he does excellent work. He is restoring my 1968 P10. Check out HNHrodshop.com His name is Chris Rice. He is in FT.Worth Texas. But he can absolutely fix your step van for half the cost of most shops. If you are thinking about selling it let me know I would like to find another one Thanks...Jamie

Re: Regarding Small Step-Vans Custom or Stock
 

January 15, 2011 Sandblasted with glass completed. 1968 P10 step van is now ready for final metal finish and prep for paint which will happen next week. Took the guys from Soda Solutions in Keller Texas 8 hours to complete the stripping. They absolutely did a great job. I had them do the inside bed which will be RINO COATED next week also. Wheel wells were blasted and looking good. All seams will be sealed using 2 part epoxy to insure no leaks and no future rust. I will post an update next week. Stayed tuned we will add the color very soon.:chevy::metal:

Re: Regarding Small Step-Vans Custom or Stock
 

http://fc02.deviantart.net/fs15/f/20...y_Hemi_427.jpg
:metal::metal::metal::metal:

Re: Regarding Small Step-Vans Custom or Stock
 

Monday January 17, 2011 Rhino Liner added to inside rear compartment area of the bed to insure bed is sealed and eliminate the possibility of rust. We will cover the bed with diamond plate when we are done Painting the exterior. Two part epoxy seam sealer is the next step then we do final metal prep before prime and Base Coat Clear Coat. More pictures to come soon.:chevy::metal::metal::metal::metal:

Re: Regarding Small Step-Vans Custom or Stock
 

January 25,2011

1968 Chevy Step Van is now ready for Prime. All metal work complete. After prime Sherwin-Williams Base Coat Clear Coat will be applied in 2 tone white and turquise.More pictures to come.:chevy::metal::metal::metal::metal:

Re: Regarding Small Step-Vans Custom or Stock
 

January 27, 2011

Etch Primer applied then step van was srayed with primer. Tu-tone paint pictures to come soon.:chevy::metal::metal::metal:

Re: Regarding Small Step-Vans Custom or Stock
 

Feb. 9, 2011,

Update....The weather has been too bad here in Ft.Worth Texas to topcoat the 1968 Chevy P10 Step Van. We are going to try and Paint it either Sat. 2/12 or Sunday 2/11/2011. Today it rained, sleeted , and snowed and it is 10 degrees outside. Coldest and worst winter in my 30 years in Texas. Stay tune... more pictures coming hopefully after this weekend. It is supposed to be 60 degrees here Saturday..:chevy::whine::five:

Re: Regarding Small Step-Vans Custom or Stock
 

I'm lovin the progress. Can't wait for more pics!

Re: Regarding Small Step-Vans Custom or Stock
 

Feb. 18, 2011 1968 Chevy P10 Update

Today we painted the step van and it turned out beautiful using Sherwin Williams base coat clear coat process. I will be bringing it home soon to install the power train and all the trim and interior...Stay tuned for more updates as we approach completion. Goal is to have it on the street April 1st.:chevy::flag::flagw::c2::four:

Re: Regarding Small Step-Vans Custom or Stock
 

That looks super cool!
I dig the colors!
Nice work!!
You should start your own build thread.
Posted via Mobile Device

Re: Regarding Small Step-Vans Custom or Stock
 

:four::four::four::four::four::four:February 19,2011 update

Loaded on trailer waiting on glass man to install all new dark tinted glass. Stay tuned for more updates:chevy:

Re: Regarding Small Step-Vans Custom or Stock
 

wow its really come a long way!!! i just got a 73 p-10 step but im having problems finding parts for it. Does anyone know of any resources similar to lmc truck but that caters to step vans?

Re: Regarding Small Step-Vans Custom or Stock
 

Love it... ;)

Re: Regarding Small Step-Vans Custom or Stock
 

March 5, 2011 Progress update

Here are a few more updated pictures. Notice the full sliding bulk head which is behind the driver. We took a bulk head out of a wrecked p-30 and custom fit it to this van. The glass man came today and all of the side glass and rear door glass will be dark tint and the windshield will be EZI light green tinted non-glare glass. Stay tuned for more pics. I will have it back home next weekend then we start reassembling the drive train which headers and a 4 bbl. carb will be installed in place of the original single bbl. This should add about 35 to 40 H.P. to the already .060 ths. over 255c.i. inline Chevy 6 engine.:chevy::four::four::four::four::four::four:

Re: Regarding Small Step-Vans Custom or Stock
 

Lookin good!

Re: Regarding Small Step-Vans Custom or Stock
 

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: Regarding Small Step-Vans Custom or Stock
 

:four::four::four:
April 12,2011 update...As you can see in the pictures we have come a long way. We are now in the process of adding painless wiring and air conditioning from OLD AIR PRODUCTS in Ft. Worth Texas. We have added power steering and a 100 amp alternator. The engine modifications include a Holley 350 CFM Offenhauser Intake with heated plate added to the bottom of the intake and Pacesetter headers. With the .060 ths over and all the other mods to the engine we are looking for an additional 40 t0 50 H.P. With the addition of air conditioning we wanted more air in the engine compartment so we added an electric fan. Every modification and up grade has been a "SHADE TREE ENGINEERING" challenge, for instance, when we added the electric fan we had to move the radiator 3 inches forward to clear the water pump housing. Stay tuned we should have the engine installed in 10 days. :chevy::metal::metal:

Re: Regarding Small Step-Vans Custom or Stock
 

Yes I'm into Stepvans. I'm looking for parts for my 72 P20 and my 72 P10. Things like weather strip for the doors and glass, New hinges for the rear doors. Both mine are Union City stepvans

Re: Regarding Small Step-Vans Custom or Stock
 

Call me at 817-456-1480 and we can talk about where to get parts...Jamie

Re: Regarding Small Step-Vans Custom or Stock
 

June 22,2011 Here are a few Pics of my finished 1968 P-10 Chevy step van:chevy::metal::metal::four::four::four:

Re: Regarding Small Step-Vans Custom or Stock
 

Love it - nice work!

Re: Regarding Small Step-Vans Custom or Stock
 

Hey Guys can I stick my nose in and show off mine...

1968 P10 Really Proud of it...Gonna hate to see it go.