Re: Barn raising
NICE,:metal:
|
Re: Barn raising
Nice truck! I love it! You did great one the rear suspension! The front suspension looks like a 20 grand show truck! Word's cannot describe! What year car did the rear come from? What brand coil-overs? Man, I love it!
|
Re: Barn raising
That looks incredible. Great work.
|
Re: Barn raising
Thanks guys for the encouragement!
The Rear end was out of a '77 Mark V. The E-brake lever arms did not work with my application so I found some 80's Lincoln calipers levers that work better with the geometry of my suspension. I had to make special brackets to hold the cables but it all work great. The coil overs are Bilsteins with 300 # springs. Has a real nice ride not too bouncy but not soft in the corners. I will be putting a 1'' sway bar on soon. |
Re: Barn raising
looks great mike i might have to copy what you did with the license plate
|
Re: Barn raising
Quote:
|
Re: Barn raising
we dont have a press so we probably have to jack up my truck and then let it down on the mold :lol: just joking
|
Re: Barn raising
My plans to paint the truck have to be put on the back burner for now since the economy has not turned around, I decided to keep the money in the rainy day fund.
With that in mind I decided to have a little fun with the already faded and oxidized paint. I got this article in my Rodder mag back in October and knew that this was the direction I wanted to go but did not have a clue as to what was going be the logo. http://www.classictrucks.com/tech/10.../photo_01.html I thought about making up some kind of fake business but couldn't come up with one that I wanted painted on the side of my truck for a while. Then a friend of mine came to work one day with a Callahan Auto Parts shirt and I figured that that would be awesome on the '69. Being that it is one of my wife and my favorite movies, it just fit the faded green trucks personality. So my sign maker friend that made the Good Year letters for my tires got another call from me and we replicated the logo perfectly. $25 bucks for the vinyl and $30 for the paint, a couple hours of work and it changes the whole attitude of the truck. Here is the before http://i361.photobucket.com/albums/o...k/DSC00067.jpg Here is the logo I had made http://i361.photobucket.com/albums/o...k/DSC00068.jpg Cleaned the side of the truck of any wax then stuck the vinyl on being careful to get all the bubbles that were close to the edges, but not real concerned about the ones in the middle where paint will not be. http://i361.photobucket.com/albums/o...k/DSC00069.jpg Ready for paint, I used Omni brand MTK urethane with MH167 hardener. I don't know if this was a good choice or not but I figured that I was going to be distressing it over oxidized paint so it really did not matter as long as I could achieve the look I wanted. http://i361.photobucket.com/albums/o...k/DSC00070.jpg I scuffed the surface after the vinyl was applied to give the paint something to grab onto since I was not priming it. Then applied several heavy coats with a soft brush waiting only several minutes between coats. http://i361.photobucket.com/albums/o...k/DSC00071.jpg Waited about 20 minutes and peeled off the vinyl negative http://i361.photobucket.com/albums/o...k/DSC00072.jpg http://i361.photobucket.com/albums/o...k/DSC00075.jpg Right after I got the vinyl off I used H.E.T. reducer 1380 and rubbed the patina into the paint. It really was easier to achieve the look I wanted than I thought it was going to be. I was a little nervous going into it but after the first couple of letters I was a lot more at ease. http://i361.photobucket.com/albums/o...k/DSC00073.jpg One thing the article does not mention and I found worked well was 0000 steel wool after I was done with the reducer. The reducer is basically like solvent and leaves the thinned paint all around the letters, a careful, steady hand will get the majority of the smudged paint off from around the letters but letting it sit for 30 min or so then I hit it with the steel wool and it took the rest of the unwanted paint off leaving me with this result. I am very happy with the final product. http://i361.photobucket.com/albums/o...k/DSC00077.jpg |
Re: Barn raising
Looks great, Nice weathering job
Spike:smoke: |
Re: Barn raising
wow that does look good
|
Re: Barn raising
Chris Farley would be very proud, nice work
|
Re: Barn raising
That looks great! It adds a nice touch to the truck.
|
Re: Barn raising
Nice! Are you going to buy a little coat and hire a fat guy for shows? :haha:
|
Re: Barn raising
fat man in a little coat.....
|
Re: Barn raising
that is awesome! tons of attitude!!!
|
Re: Barn raising
Quote:
Your build is amazing, your truck is coming along great. Looking at your Lincoln 9" at first glance it looked longer than the chevy rearend to me especially seeing where your shocks are mounted. But then I read you say its shorter and your tires right at stock spacing.. Since you have the backspace you want on your rim, could you run a wider, lower tire instead of a spacer? Im just throwing something outhere. I had to get my 10 1/2" ralleys altered so I would have a 4 1/2" backspace so they would fit under without cutting tubbing. |
Re: Barn raising
Thanks Vdog
The lincoln is wider than the C20 rear by several inches but not the C10 rear. C20's have huge drums on them which takes up axle width. So this is where I was just guessing at the correct width of the axle and b.s. needed. Unfortunately I did not get the back spacing I wanted. Coy's has certain b.s. for certain wheels and I did not want the wide 10" rim for gas mileage reasons, but I wanted a deeper well on the wheel which would have pushed them out further w/o the need for a spacer. Coy's had recently discontinued the C55 rim that I really wanted, and had only small amount of 18's left to choose from. None were deeper than the ones I got, so I hoped that the amount of b.s. on these wheels would move them out enough, as you can see it did but not enough. I do not think running a wider tire would have given me the width that i was looking to achieve with the spacers. Maybe next time I will try wider. but I wanted to run the exact same front and rear so that I could rotate when needed. |
Re: Barn raising
Quote:
I understand now. I forgot you had a C20, which now makes sense. On that note, as far as a good backspacer, im not sure. Maybe a tire and rim shop might be able to reccomend a good one. |
Re: Barn raising
nice build! the rear end is awesome. very cool truck indeed!
|
Re: Barn raising
Quote:
|
Re: Barn raising
Quote:
Mike thats great news, glad you found some good ones. I went to 4x4 Warehouse in Lawndale a few years ago when I could not find rearend spacers at any local parts store. Cost me a 12 pack of Pepsi for about 20 spacers. |
Re: Barn raising
Very nice! I like everything you have done with the pickup and you have done it well. Great job.
|
Re: Barn raising
Figured I would take it out and take a couple of pictures that were not in my driveway.
http://i361.photobucket.com/albums/o...ofDSC_0026.jpg http://i361.photobucket.com/albums/o...ofDSC_0028.jpg |
Re: Barn raising
Love it. The sign looks great.
|
Re: Barn raising
those were some cool shots
|
Re: Barn raising
hey- from the Sandusky, oh area. the truck looks great. nice job man.
|
Re: Barn raising
This is my favorite truck on this site..
|
Re: Barn raising
Quote:
I have noticed that after I lowered it and started refining the theme I get all kinds of compliments to the point that I am starting to think about alarm systems and I now park it in the garage and the wife's explorer is on the driveway, she is not thrilled with the arrangement. :lol: |
Re: Barn raising
That is a cool pickup!
|
Re: Barn raising
Hey, for you tires I have a great idea.
Alsa Corporation "Rubber Paint" Nothing sticks better to rubber! Rubber Paint goes where other paints dare not tread! It sticks to most rubbers and pliable urethane substrates with unequaled "stretch". No more cracking or peeling like traditional paint. Our special formulation retains it's flexibility much longer than other products which use flex additives that leach out of the paint finish over time. Rubber Paint is an ideal product for restoring or retouching the color if your rubber. Email them, it isn't on their website, but it's in the catalog. http://alsacorp.com/ |
Re: Barn raising
how hard was it to register your truck as a 1/2 ton
|
Re: Barn raising
Well that is an interesting story, I am still in the process of it. Had a camper shell on it when I bought it so it had auto plates. When I restored the black and yellow plates for it I went back to commercial. They only asked me to weigh the vehicle, they never had any question about C20 or C10 status. But I am having a heck of a time getting the YOM plates on the truck.
|
Re: Barn raising
Quote:
|
Re: Barn raising
Quote:
|
Re: Barn raising
Mike, I'm thinking of running the Patriot side pipes on my 71. Where did you get them ,what length kit did you orgionaly buy,and how is the sound outside and inside the cab at idle and on the throttle? Thank's, Tom
|
Re: Barn raising
wow ! gotta say nice build. i just looked threw the pics (ill read later) awsome work. !!!!
|
Re: Barn raising
Quote:
I got the 73" length but it really did not matter because I was getting rid of the collector in front of the side pipe so I could have made it any length. Posted via Mobile Device Posted via Mobile Device |
Re: Barn raising
Quote:
|
Re: Barn raising
oh ok thanks mike
|
Re: Barn raising
If it was me I would just swap the VIN tags. I know, I know... but the cabs are exactly the same, so morally speaking I think it would be ok to do.
|
All times are GMT -4. The time now is 03:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com